|
Binding problem
Two of the guys I fly with have been having a problem keeping there receivers bond to the transmitter. They go to fly and the reciver does no respond to the transmitter until they rebind. Anyone else having this problem? I have not had a problem with mine. Jerry
Posted on: 9/2/2007 9:00 PM by Author "Jerry C"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=6319648
RE: New JR 9303 2.4 w/921 RX
in a mater-of-fact way. Just tell us what the problem is. Jerry
Posted on: 8/23/2007 6:38 AM by Author "Jerry C"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=6275800
RE: New JR 9303 2.4 w/921 RX
I have heard that the radios are in, and they are in QC, and they have found a problem with them. Has anyone else heard anything?
Posted on: 8/18/2007 9:11 PM by Author "Jerry C"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=6255813
RE: New JR 9303 2.4 w/921 RX
X9303 2.4 A/S Tx w/JRDSM 9-ch RX NO SXS M2 JRP2915 by JR The world's most admired 9-channel radio plus the no-pins, no-crystals, no-glitches convenience and security of proven DSM2™ 2.4GHz technology by Spektrum™ . $629.99 List: $999.99 Add to Wishlist Item coming soon. Due Early September, 2007 Similar Products » X9303 2.4 A/S Tx w/JRDSM 9-ch 4-821 X9303 2.4 Heli Tx wJRDSM 9-ch Rx, 4-821 Sx Mode 2 X9303 2.4 Heli Tx w/JRDSM 9-ch RX NO SXS M2 More in this Category More in this Brand
Posted on: 8/9/2007 4:04 PM by Author "Jerry C"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=6217075
RE: Spektrum DX-7
My 6100 receivers work fine. Jerry
Posted on: 2/7/2007 11:00 AM by Author "Jerry C"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=5383826
RE: e-flite cap 232 bp
Where are you guys mounting the battery? I dont think using just vecro will hold. I have allways used a tie strap plus the vecro. Are you removing the covering behind the velcro? Jerry
Posted on: 1/13/2007 4:26 PM by Author "Jerry C"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5259387
RE: HOW-To..3D maneuvers
What simulator are you guys using? Jerry
Posted on: 12/30/2006 8:14 PM by Author "Jerry C"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5184732
Indoor Site
Hi Im looking for an indoor flying site, needs to be in northern , Indiana, or lower Michigan. Im located in Elkhart, Indiana. Thanks Jerry
Posted on: 11/25/2006 7:44 PM by Author "Jerry C"
in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=5038554
140 FZ prop and rpm
Hi Dave I have a YS 140 FZ, it is in a Funtana 140 Pro., 10 1/2 lbs, and use it mosty for 3D type stuff, Im running power master 30 % fuel what do you think I should start with for a prop, and what RPM should I be looking for? Thanks Jerry
Posted on: 8/21/2006 9:35 PM by Author "Jerry C"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=4652494
RE: Field Stand
How much have you been getting for them? Do you have a drawing, maybe with some measurements? Jerry
Posted on: 6/4/2006 8:39 AM by Author "Jerry C"
in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=4351104
RE: Field Stand
I would also like a copy if possible. Jerry
Posted on: 6/3/2006 1:42 PM by Author "Jerry C"
in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=4348636
RE: Katana S
Hi the one I got is the new Seba colors. Im thinking of using the DA 100, or a 3W106 not sure yet. Have any of you had a chance to fly yours yet? The photo is the color that I have. Jerry
Posted on: 6/2/2006 10:21 PM by Author "Jerry C"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=4346776
Katana S
I picked up a Krill 33% Katana S at the Joe Nall. Is there anyone out there with one? If so what are you using on it ? Jerry
Posted on: 5/31/2006 7:26 PM by Author "Jerry C"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=4337787
RE: Welcome to Club SAITO !
Is there a carb stack that will fit on the 125? Jerry
Posted on: 5/31/2006 7:03 PM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4337699
RE: Joe Nall. Anyone going
What will be avalible in the way of food vendors? I plan on camping and would like to know what to bring. Thanks Jerry
Posted on: 5/14/2006 3:14 PM by Author "Jerry C"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4277239
RE: NEW FUNTANA X 100 & X 50
Where can I find the specs for these? Jerry
Posted on: 4/4/2006 8:09 PM by Author "Jerry C"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4125189
RE: Welcome to Club SAITO !
What causes the engine to start backwards? New Saito 125. Jerry
Posted on: 3/31/2006 4:22 PM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4107954
RE: Welcome to Club SAITO !
Are the ceramic bearings from Boca Bearings any better than the ones from RC Bearings? There is a big price difference. Jerry
Posted on: 3/24/2006 7:21 AM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4075955
RE: U-Can-Do 3d 46?
Which bearings went bad in your 125. My first 125 developed a real bad squeal after about 1 gal of fuel. I dont know which bearing went, but the hobby shop gave me a new one. I have it on the test stand now, breaking it in. Jerry
Posted on: 3/20/2006 8:36 PM by Author "Jerry C"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4060426
RE: Super Tigre .60 Bluehead
I have a question. How much should a 60 blue head be worth? This one has a factory installed perry pump, and carburetor. It has not been run, there is no box, or instructions. Jerry
Posted on: 3/18/2006 12:41 PM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4049986
RE: Welcome to Club SAITO !
it running. It does put out air. Any thoughts. Jerry
Posted on: 3/14/2006 1:26 PM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4033329
RE: Welcome to Club SAITO !
I tryed mine with an APC 16x4W and it reved a little to high, I used a, APC 17x6 and it was a little to much. The APC 16.5x5W pulls realy strong. Jerry
Posted on: 3/7/2006 8:55 AM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4002758
RE: Welcome to Club SAITO !
[quote]ORIGINAL: xX911gt2Xx Hey guys i had a question. Just picked up a 125 for my funtana 90... what prop should i swing for break in and/or 3d? I had a brand new graupner 15x8 that i put on, according to the manual. should i stick with it? thanks [/quote] I'm using an APC 16.5x5W and it seems to work very well. Jerry
Posted on: 3/7/2006 8:35 AM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4002707
RE: Welcome to Club SAITO !
[quote]ORIGINAL: Jerry C I have run into a problem with my new Saito 125. Ive run about a gal of fuel thru it, and it has developed a terrible squeal. I ran about 1/2 gal thru it on the test stand... a very bad squeal. If I was to guess I would think a bearing has gone bad. Any ideas? Jerry [/quote] Hi Bill I thought maybe you would jump in here and give me your opinion to. Jerry
Posted on: 3/1/2006 7:41 AM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3975767
RE: Welcome to Club SAITO !
. If I was to guess I would think a bearing has gone bad. Any ideas? Jerry
Posted on: 2/28/2006 6:20 PM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3973398
RE: YS CLUB
I have a 140 FZ that I'm getting ready to put up for sale , send me a PM if anyone is interested. Jerry
Posted on: 2/25/2006 10:27 AM by Author "Jerry C"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3957986
RE: Welcome to Club SAITO !
Is there a carb stack that will fit the Saito 125 Jerry
Posted on: 2/23/2006 5:24 AM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3948413
RE: Saito 125 anybody? Finnaly coming are way
What prop are you using now, and what rpm are you getting, and on which fuel? I have one that I'm just now starting to break in on the bench, it seems to put a lot of oil, and or fuel out the crankcase vent how about yours? Thanks Jerry
Posted on: 2/6/2006 8:48 AM by Author "Jerry C"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3874956
RE: Welcome to Club SAITO !
Hi hobbsy What is the round thing that the outlet fuel line from the Iron Bay is tie straped to? Jerry
Posted on: 2/4/2006 12:19 PM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3867475
RE: Welcome to Club SAITO !
Hi I have a Saito 125 how do I join? Jerry
Posted on: 2/4/2006 8:35 AM by Author "Jerry C"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3866761
| 
