|
RE: 91 magnum 4 stroke how to set cam ?
Thank you to all who replayed,as soon as I saw the picture I remembered "O" the golden years. Thanks again
Posted on: 10/21/2011 9:48 AM by Author "Jerrybl"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10776115
RE: Club MAGNUM !
I have a mag. 91 four stroke I would like the instructions for setting the cam timing. Had the instruction placed them in safe place where?
Posted on: 10/20/2011 2:41 PM by Author "Jerrybl"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10774999
91 magnum 4 stroke how to set cam ?
Ihave a 91 mag. can any out there help me to set the cam? Ihad the instruction put them some place safe??
Posted on: 10/20/2011 2:33 PM by Author "Jerrybl"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10774988
91 magnum 4 stroke how to set cam ?
I have had the instructions but they got lost,Iprobley placed them some place safe. Can some one please help?
Posted on: 10/20/2011 2:30 PM by Author "Jerrybl"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10774982
RE: Nieuport -28 68
Hi Dan I tryed to up loan a picture,it replyed that it was uploaded but where I dount know where it went. Thank you for your reply.
Posted on: 1/9/2011 11:45 AM by Author "Jerrybl"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10250612
Nieuport -28 68 "
Hi all I need help, I bought a niewport-28 without the rudder knowing I could build one well wrong again now I would like some help.Can some one tell me where I might get the planes or supply me with them. It would be of a great help to me,also my wife she thinks I have lost it. jerrybl2@verizon.net
Posted on: 1/8/2011 10:47 AM by Author "Jerrybl"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10248205
o.s. sf 60 cam an valve setting
Bax Thank you for the prompt reply, Now its my fault,I may have negelected to ask for the correct information. The engine I have is, o.s. sf 60 rear cam (circ 1967) Its old but it should be preserved if possible. It is in very good shape,so if I can find out the settings I will have running,and on a plane. Thank you four tine and effort. Jerry Lamb Hide Signatures (in reply to Bax) Post #: 3
Posted on: 11/18/2010 3:49 PM by Author "Jerrybl"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10143670
RE: o.s. sf 60 cam an valve setting
Bax Thank you for the prompt reply, Now its my fault,I may have negelected to ask for the correct information. The engine I have is, o.s. sf 60 rear cam (circ 1967) Its old but it should be preserved if possible. It is in very good shape,so if I can find out the settings I will have running,and on a plane. Thank you four tine and effort. Jerry Lamb
Posted on: 11/17/2010 11:14 AM by Author "Jerrybl"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10141081
o.s. sf 60 cam an valve setting
I have just aquired a o.s. sf 60 (circ 1967)I dismanttled it,now how is the cam and valves set? Can any one help? I would like very much to get this engine running.
Posted on: 11/16/2010 6:30 PM by Author "Jerrybl"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10139648
RE: Switching batteries in flight.
Follow BarracudaHockey suggestion only one problem,you will need to arrange for a tanker as the lipo battery will last for a week or so.[:)]
Posted on: 5/29/2010 11:46 AM by Author "Jerrybl"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=9767209
RE: Opinions on Magnum 4 strokes please
If you can't tune,don't fly,or atleast get help. Magumes are like a fine women,it takes a sertine touch if you dount have it work on it. Or as last resort read the book. Or find some more books.
Posted on: 5/15/2010 2:51 PM by Author "Jerrybl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9735673
fokker D V111
Is this better, all i would like to know is the engine some are useing also the cg. Some don't give any info just comment on upper and lower case letters
Posted on: 9/16/2009 4:21 PM by Author "Jerrybl"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9051993
XYZ 26 CC ENGINE
I dove and dident stop, now my engine needs some work. How do you take off the prop hub? I just read that this is normal for a xyz engine bent crank soft? HELP
Posted on: 8/31/2009 2:49 PM by Author "Jerrybl"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9059202
fokker D-8 1/3 scale 40# +/-
I placed an add yesterday but got my numbers wrong,I stated a D-7 it should be a D-8 1/3 scale. I would like to know what size engines you are useing. Also what did you use for a CG. Thanks in advance Jerry
Posted on: 8/26/2009 11:52 AM by Author "Jerrybl"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9046566
fokker d-7 1/3 scale weight +/- 4o #
can anyone help with a engine size?
Posted on: 8/25/2009 10:39 PM by Author "Jerrybl"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9045326
RE: D-8 fokker I NEED THE CG HELP
OK THIRD TIME IS A CHARM CG FOR 1/3 SCALE FOKKER PLEASE HELP DUM FINGERS
Posted on: 8/17/2009 11:10 PM by Author "Jerrybl"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=9024471
RE: D-8 fokker I NEED THE CG HELP
WHATI NEED IS THE CG FOR A 1/3 SCALE HELP!
Posted on: 8/17/2009 11:08 PM by Author "Jerrybl"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=9024461
D-8 fokker I NEED THE CG HELP
[8|]
Posted on: 8/17/2009 4:20 PM by Author "Jerrybl"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=9023397
RE: Futaba TX and JR RX compatibility?
GO TO THE BOTTOM OF YOUR MESSAGE YOU WILL SEEGO TO SCROLLUP OR DOWN LOOK FOR FUTABA SUPPORT GOOD LUCK
Posted on: 2/24/2009 4:28 PM by Author "Jerrybl"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8513741
RE: Who else was ripped off by Barry Cohen, RCOnly Website.Com?
Who is Berry Cohen? 318,000 for Barry Cohen hits for him from google
Posted on: 1/28/2009 12:40 PM by Author "Jerrybl"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=8411733
RE: Who Makes this Button Head Nylon Bolt?
May be? Lows or Ace hardware
Posted on: 9/13/2008 6:56 PM by Author "Jerrybl"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=7951038
RE: Painted spinner
Here is what I used,It worked great. I roughed up the spinner with 240 wet or dry very lightly,I put a bolt in the hole and gave it three coats of paint. May be I should have used a primer ? My spinner '"was" mounted on a 91 magnum, lawn dart, broke the spinner -scratched the paint.[:o] RUST-OLEUM PROFESSIONAL HIGH PERFORMANCE ENAMEL TOP INDICATES COLOR COMES IN SILVER CAN I BOUGHT MY CAN @ LOWES
Posted on: 7/14/2008 7:48 PM by Author "Jerrybl"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7731086
RE: Can I reverse the throttle linkage on my saito
yes[:D]
Posted on: 7/6/2008 10:11 PM by Author "Jerrybl"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7700857
batteries for a-10
batteries for a-10 9.6v aaa where can I find these??
Posted on: 5/29/2008 10:36 PM by Author "Jerrybl"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=7557783
RE: A-10 Warthog
Called Nitro sending it back refund ya
Posted on: 5/27/2008 9:53 PM by Author "Jerrybl"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=7548958
A-10 Warthog
A-10 took it to the field today,what an experance! touch the sticks and wo touchy. But the real problum it was cuting out in flight,landing was ok,inspecting motors and fans. Turned on motors for a listen bad news left motor fan rubing on housing,feels like its going to vibrate apart,shut down quick. Help!
Posted on: 5/26/2008 7:00 PM by Author "Jerrybl"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=7543611
RE: A-10 EDF "Warthog"
It should be 2" back from leading edge.
Posted on: 5/26/2008 6:43 PM by Author "Jerrybl"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=7543530
RE: KPM Bearcat #4post
Dumdedum first try next time will be different![:@]
Posted on: 5/17/2008 1:06 PM by Author "Jerrybl"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7507155
KPM Bearcat #4post
This the last one Mel S.[&o]
Posted on: 5/16/2008 10:43 PM by Author "Jerrybl"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7505549
KMP BEARCAT
tHIS IS THE OTHER ONE THAT DIDENT COME UP ON LAST POST.THIS IS ALSO FROM MEL S.
Posted on: 5/16/2008 9:49 PM by Author "Jerrybl"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7505356
| 
