RE: Rob Lynch's new store
Markham Park is a great airfield and having a good hobby store close makes it all the better.Looking forward to the coming jet event at the Park this fall[8D]
Posted on: 9/2/2011 10:40 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10698465

RE: Wanted Balsa Bandit Kit
Wish you luck Pete.I found one a few months ago listed in a estate sale and it had all the options with it.I have built two of these years ago and am having fun building this one[;)]
Posted on: 9/2/2011 10:34 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10698454

RE: BOOMERANG ELAN - New Build & Setup Thread!
A right angle dremel attachment makes enlarging air tank holes a breeze[8D]
Posted on: 7/25/2010 9:13 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9886936

RE: Spektrum module case change Air module
John, you will find them at Horizon Hobby.Type in JR module and it will show one for the AR7000 receiver and one for the AR9000 receivers
Posted on: 5/2/2010 10:16 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9704148

RE: F-86
Well Joe,Its looks like your hard work has paid off with a great looking and flying aircraft with a story to go with it. [;)]
Posted on: 5/2/2010 10:04 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9704126

RE: F-16>> OLD BVM vs OLD Yellow
The BVM is definately the better of the two.Make sure you add some extra reinforcement in the form of carbon fiber cloth to the top of wings where they join the fuse.The F-16 has a lot of wing flex in this area on high G turns.
Posted on: 5/2/2010 9:53 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9704109

RE: What are You Building This Winter?
Just finished the second of two BVM Electras I've put together this winter.This one is the lightest of the three I have built,weighing in at a even 14 Ibs RTF.It uses the mechanical gear where the other two had air retracts.Now I can take a break from the workshop[:)]
Posted on: 1/18/2010 2:40 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9426774

RE: Unacceptable practices
Pete.Don't you have anything to build or ressurrect this long winter?
Posted on: 1/11/2010 11:28 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9406570

RE: Rcpete steals the Olympic Torch today
Pete.I glad to see you get out of your workshop in the winter.Merry Christmas to you and your family
Posted on: 12/19/2009 12:43 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9343509

RE: JR Spectrum Failure for Jet use.
One of the most overlooked problems with a failed 2.4 system is the transmitters that use the plug in module such as the JR10X.The module needs to checked for any looseness in the fit to the transmitter and secured if needed.
Posted on: 12/7/2009 12:42 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9310825

RE: Jim Hiller
Sent it to you Ron
Posted on: 11/24/2009 1:23 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9277467

RE: E-Jets International
Hopefully,you won't need to win it again.[8|].I will see you Sunday and we can get our Electras ready for the big show[8D]
Posted on: 8/28/2009 4:30 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9052505

RE: BVM Ultra Viper Turbine?
Gary Mueller of Jet-Tech fuel tanks has a conversion for your application which shares the same basic fuse as a Maverick or a Aggressor III.I did a Ultra Viper conversion usings Garys inlets,tanks,bypass etc 2 yrs ago and it flew great with a T-500 engine.
Posted on: 8/28/2009 12:38 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9051986

RE: E-Jets International
I will have my new (Sparky) Electra there[;)]
Posted on: 8/28/2009 12:28 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9051971

RE: New Bobcat
Very nice job,I can appreciate the work you have put into this project[;)]
Posted on: 7/21/2009 1:51 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8952112

RE: Jets Over the Heartland 2009
Good time as usual at the MAC.Glad to see that Peanuts finally decided to return after all the noise was through[;)]
Posted on: 7/2/2009 10:02 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8900488

RE: Replacing Intairco Worn Tires
Well someone has to look out for you when Russ isn't around
Posted on: 6/8/2009 9:36 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8836817

RE: Replacing Intairco Worn Tires
Dave,I cut the old ones off and coated the new ones with a soapy solution,laid the rim on a piece of plywood so not to damage it and placed tire on rim and stomped it with my heel.It took two or three attempts,but tire popped right on rim.The old fasion way works the best for me. Oh! be sure to wear shoes when attempting this.Gerry
Posted on: 6/8/2009 9:23 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8836772

RE: Upgrading turbine in Bobcat, what do I need?
Use a 1/2" + mount for the P-80 and you will clear the fuse and be able to use the Jet Cat FOD screen.Tilt engine about 5 degrees down .I see you have a mount raising your 500 up for clearance so use same principle on your new P-80SE
Posted on: 6/5/2009 10:37 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8829226

RE: UP-6 brake valve servo recommendation?
I use the Hitec HS-81.36 ozs at 4.8 and 42 at 6.0 volt.Never had a problem and priced right for that particular job.
Posted on: 1/22/2009 2:26 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8388377

RE: BVM Electra wings on a BV Ultra Viper
I had the same thought,but ended up contacting FlyingFoam.com in CA. and sending them Maverick wing plans to cut a set of Mav. wing cores.I then used the hardware from the Viper wings to construct the wings.Flyingfoam probably has this on record so they can cut future cores.I do have a extra set of cores.
Posted on: 12/9/2008 10:48 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8228249

RE: PCM10X 2.4Ghz issue
If ?? your transmitter battery is good,I would say your problem was in the loose module.I am running the same system and have for the past year with no problems,but I secured the module by inserting wood behind the module ears to spread them out and then I taped it over with clear 3M tape.
Posted on: 11/25/2008 2:44 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8182171

RE: topgun invites came today
You have just been removed from this years list.[>:]Frank is probably relieved[:D],I'm still trying to figure out how to add retracts to my foamy Tiger Moth[8|]
Posted on: 11/6/2008 1:45 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8120959

RE: Please Pray for "Frosty" & His Family
Patrick,sorry to hear about your house.Most important though is the family is ok.I hope it wasn't a fat chick stuck in the chimmy that started the fire.
Posted on: 10/31/2008 4:39 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8102506

RE: RX antennas...
Modelers not using a 2.4 system have used Revolution or Deans antennas inside the fuselage to hide the antenna mast or just ran the standard receiver wire inside the plane.External antennas eliminated most all internal radio interference.
Posted on: 10/30/2008 7:17 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8098226

RE: F-84G "Rainbow warrior" is complete
Your time involved and building skills are evident in the final result.
Posted on: 10/23/2008 7:10 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8076694

RE: How do you fix a cloudy canopy?
Once acetone is on a canopy,nothing short of wet sanding it with 1200 to 1500 grit and clear coating is going to fix it correctly.
Posted on: 9/21/2008 7:06 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7976773

RE: Beefing up a BVM Bobcat
Safety is a issue for the pilot as well as the bystanders[8|]
Posted on: 9/19/2008 1:17 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7970200

RE: Beefing up a BVM Bobcat
I think that throttle management would definately be called for with a 120SE.Way overpowered for a Bobcat.A 21 lb P-80 would be a better choice.
Posted on: 9/19/2008 10:08 AM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7969696

RE: BVM 60" f-86 ARF ??
Ahh Timmy, you finally have a chance to hang with Big-T.Do you think he will really come to Spiderman or let you down for another year[:(]
Posted on: 9/18/2008 7:35 PM by Author "Jet Lag" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7967970