|
RE: FLY EAGLE JET models 2012
Hey Keith, Did you use this technique with the boxes already glued in place or before you glued them in? I use the wire technique, but with the FEJ Hawk there is little room to get wire in once the servo boxes are in, plus they are solid on the wing root side of the box. So in other words I would have to snake the wire in then get it to bend 90 degrees to go into the box. I have built one FEJ Hawk already, what I did was snaked my wire in first then fit and glued my boxes. I can't imagine this being fun after they are glued. I think Rex mentioned this also in his Hawk manual. This my not be true with all FEJ models, but the Hawk has a limited space in the wings.
Posted on: 9/11/2012 4:00 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11225409
RE: FLY EAGLE JET models 2012
Hey James...You may want to have the company run the string to pull the servo leads through if the boxes are pre-installed. From my previous experience of building your Hawk, once the boxes are installed it is pretty tough to get the leads through without the preinstallation of string. I ran string into the box areas before gluing the boxes in place. If they are pre-installing during the mold process, it would be pretty simple for them to run the string for both the ailerons and the flaps as there isn't much room once installed. Something to consider! BTW-Waiting on my custom painted Large Hawk patiently!
Posted on: 9/10/2012 4:47 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11224275
RE: FLY EAGLE JET models 2012
Nice Scheme James...Now I will have to also get the Viperjet in this scheme!
Posted on: 9/6/2012 1:20 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11219846
BAe Hawk Purchase Suggestions!!
Hi All, I'm looking for another Bae Hawk 160-180 size. Skymaster & Airworld which has scale looking gear and doors. I particularly like the Airworld 1/4 scale at 110" in length, but don't like the one piece wing. Also, there doesn't seem to be alot of information out there on the bigger of the two Airworlds or even a build thread that I have found. If anyone knows of anything on the 1/4 Airworld Hawk please add a link or email me. What do you guys think of the other Hawks out there and your experiences. Should I go with the Skymaster or Airworld? I do know the 1/4 scale Hawk is tickling the Skygate price range, that could also be a option. Thanks guys in advance!
Posted on: 8/28/2012 9:19 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11208682
RE: BAe Hawk Marine Centennial scheme help!!
Thanks Guys, Is that a really light grey on the fuse or white? Some pics look grey and some white.
Posted on: 8/18/2012 1:00 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11197969
BAe Hawk Marine Centennial scheme help!!
Hi guys, I'm looking for the Marine or Navy Centennial scheme for the BAe Hawk in three views for painting. If anyone happens to know where I can find it, please add link to thread or PM me. Thanks in Advance!
Posted on: 8/14/2012 7:17 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11192919
Amp Draw on servos???
Hi All, I'm getting .10 amps on my flap servos at neutral, when they are deployed in motion a little higher but once they get set i'm getting about .05 amps. Is this Ok? Then when I pull the flaps back to nuetral my amps no longer settle at .10 it's around .14amps. Is there any need to be concerned about these numbers? It's setup on a 1/4.5 Hawk from Fly Eagle Jets and the flaps are pretty big, the servos are Hitec 7955. What kind of amp draws are you guys seeing? Thanks Again for all the help!
Posted on: 8/10/2012 3:42 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11188652
RE: The new Tornado sport jet
[quote]ORIGINAL: Newskin78 Â Oh wow guys everybody watch out we got our very own Johnny Cochran. Are you black to? What your hourly rate I might need an attorney. Let me guess your going to tell me I can't afford you right lol. This is all pathetic lets get back to jets [/quote] This has ABSOLUTELY nothing to do with race! Take it somewhere else!
Posted on: 8/10/2012 6:31 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11188041
RE: The new Tornado sport jet
747, I knew that would be coming next. Well here we go! It's obviously not enough to compare. But, I found your answer: http://www.aviationinterviews.com/pilot/airlinepayrates.html If this holds true...You REALLY don't want to talk finances with me. I made more money last year alone on investments then your entire years salary, that doesn't even include my earned income of $40k-50K/month average. How does $93K last month alone sound just on one nationally known case. Not only that I am my own boss, don't have to answer to nobody. Again, comparing your finances to mine IS like comparing BVM to Modellbau! I'm Done here, jokes on you 747, you bark up the wrong tree this time! Back to the issues at hand!
Posted on: 8/10/2012 6:22 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11187943
RE: The new Tornado sport jet
747, Comparing BVM to Modellbau..The only similarities are the wheels and brakes and I think they got that idea from BVM. If people have a problem with a manufacturer other members need to be made aware of it. You are the only one that has supported this nonsense from Modellbau, well that lets us know how shallow you are. Was it because you accidentally got that new V3 upgrade kit? Do you feel obligated now? As for the finance side of it, Well I guess my signature line touched a nerve. We know how you paid for that New Bandit, Did you get that CC statement yet? What a joke you are! Now you can keep your dumb comments to yourself!
Posted on: 8/9/2012 5:37 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11187560
RE: The new Tornado sport jet
747..You just bought a New BVM bandit ARF and the formers were not glued? Now you are saying BV doesn't take pride in his stuff too huh? I call you bluff on that one..As I have owned a BVM Bobcat. Are you getting paid by Modellbau to protect his imagine. BVM and Modellbau are in two different classes, Period!
Posted on: 8/9/2012 2:54 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11187372
RE: The new Tornado sport jet
Dblex, what's your point?
Posted on: 8/7/2012 7:17 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11184962
RE: The new Tornado sport jet
Henry, You are wrong for that reply. You did not have to wait for me. I simply told you I was in a meeting and for you to send me over a invoice and I would pay it right away and you never did and you never called me back. I have the text messages confirming that. You also told me that if I pay I would be number 120 in line for one, If I understood you right there was no longer a waiting list because you had an extra 7 according to your previous post. I'm not the only person that says your customer service is horrible. That Tornado that you shipped to GA belongs to a friend of mine and he also said that his experience with you was very unprofessional and your estimated delivery dates are not even close to actual dates. But, as you always do, you blame the consumer for your mistakes and you don't accept negativity very well. From my very first call to you, you were very short and blunt with any questions I had about the plane as if you didn't feel like answer questions but just wanted my CC#. Thanks but No Thanks, you can keep it. For all you guys that say Henry is a stand up guy, wait until you have a problem or need parts! Good Luck! This is the same guy that couldn't even supply me with a engine mount let alone a wing or boom. Once the charge is made you can forget about customer service! Good Luck Tornado Owners!
Posted on: 8/7/2012 6:14 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11184891
RE: The new Tornado sport jet
Henry..You never called me back or sent me a invoice like you said on my purchased of the V3, What happen? I take it that they are all gone now, but it worked out for me I bought a New Large ViperJet instead :-) Good Luck V3 guys, hopefully you won't need parts... Henry, word to the wise, customer service and attitude is everything!!!!
Posted on: 8/7/2012 12:54 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11184549
RE: Landing Lights
Thanks for all the replies guys! I ended up going with the Solarforce replacement bulb and reflector for flashlights at at 420LM Cree XM-L (blinding bright)$15 and a micro switch $1.50. I have it running on it's own 4.8v battery, my UP3 retract valve plunger pushes on the micro switch to turn the lights off when the gear is retract. When the gear down is switched the plunger releases the micro switch and the light comes back on for landing. I used a on/off switch to control main power to light and toggle switch. Works perfect!
Posted on: 8/5/2012 5:53 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11182208
RE: Redundant RX packs are they overkill?
Fromeco Wolverine switches works for me!
Posted on: 8/5/2012 3:29 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11181997
RE: Tam Jets Gear Fail Safe
Ok, Thanks!
Posted on: 8/1/2012 4:53 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11177719
Landing Lights
Hi All, I need a super brite nose landing light for my 1/4.5 Hawk. Just looking for the nose light not the entire Nav. system. Any help is greatly appreciated! Thanks in advance guys!
Posted on: 8/1/2012 3:21 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11177605
RE: Tam Jets Gear Fail Safe
Todd, Will you have the hard case ones or the ones in the plastic covering? Thanks
Posted on: 8/1/2012 3:00 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11177575
RE: The new Tornado sport jet
Hey Guys! I had a JC Rabbit VT90 on mine with the Dreamwork tank and a BVM UAT and my timer was set to 8 mins and I still had about 1-1.5" of fuel left. The tank I had in before buying the DW one was the stock with the inside the tank vent which I couldn't fill all the way, my timer was set to 7 mins.
Posted on: 7/31/2012 11:54 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11176104
RE: New CGRCjets super scale A-10
Doing well Chris! Following this thread gearing up for the sale date...LOL! It's coming together very well, Are you still in FL?
Posted on: 7/24/2012 6:25 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11167099
Fuel Shutoff Valve??
Hi All, Where do you guys put your fuel shutoff valve? Before or after the Fuel pump? What is recommended? Thanks in Advance!
Posted on: 7/22/2012 7:15 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11165145
RE: New CGRCjets super scale A-10
Looking good Brotha! Can't Wait to get my hands on one!
Posted on: 7/22/2012 5:34 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11164977
Futaba 14MZ???
Hi All, I have a 14MZ and wondering if it is possible to have a warning on my gear switch when in the wrong position when I turn my TX on? Thanks in advance!
Posted on: 7/16/2012 8:20 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11158147
RE: Looking to buy p180 or mamouth
Jetkopter.. There are tons of purples on sale in the classified, but I don't see many if any Jet Central on there. I have been looking for over a month now, I wonder why. Not only that, Jetcat is like a auto mechanic and you purple guys are getting taken to the cleaners and don't even realize it. I owned ONE purple and had it serviced and due to the service bill I WILL NEVER own one again.
Posted on: 7/15/2012 7:47 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11156712
RE: Homeland security and Kerosene
Wow! But hey give up the information...who cares if you are not doing anything wrong..this kind of stuff keeps out jets out of the wrong hands...All we need is for someone to make it past and hit one of our landmark buildings and there goes turbine flying..
Posted on: 7/13/2012 10:58 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11153930
RE: Airworld Hawk?
Thanks David... He sent me a message last night. Just waiting on some pics and more info from him.
Posted on: 7/10/2012 1:50 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11150346
Airworld Hawk?
Hi All, Where can one buy a Airworld Hawk these days? Does anybody have one that they want to sell in Either Kit form, ARF or RTF? Shoot me a PM. Thanks in Advance guys!
Posted on: 7/10/2012 12:41 PM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11150251
RE: Live streaming at Jets over Kentucky Week.
Another top notch service from Jet Central!
Posted on: 7/9/2012 9:31 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11148742
RE: Pisco Air Pressure Gauges????
Ok..I now understand! I like the simple PSI reading, no mote Pisco for me. Thanks Guys for you help!
Posted on: 7/6/2012 9:26 AM by Author "Jetfan20"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11145341
| 
