Blade450 Stock servo rebuild?
Any Videos, Pics or instructions on the proper way the gears go on, any help is appreciated. Thanks Tony
Posted on: 11/14/2011 4:54 PM by Author "Jetskier" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=10812223

RE: RX question
ya, for piece of mind, I will just spend the extra 80 bucks, not complaing about the money but now I am up yo about $ 380.00 in electronics and that does not include Flaps or retracts, oh buy the way can I use the servos from the Stenson just for flaps?
Posted on: 11/10/2011 2:10 PM by Author "Jetskier" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10806016

RE: RX question
Ya, I have the heli version of the DX7, which came with servos and RX, the Ar500 came out of the Park Zone Stenson Foamie, The guy at my lhs said the Rx from the Stenson should work but I just want to make sure.
Posted on: 11/10/2011 2:55 AM by Author "Jetskier" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10805295

RX question
Just bought the Hanger 9, P51 sport 40, that I will build as an electric, and was wondering if I can us the spectrum AR6100 which came with my DX7 or the AR500 which was in my sons PZ Stensen, which had a terrible crash. Other than that, I will buy all the recommended servos,esc and motor recommended for the kit. Thanks
Posted on: 11/9/2011 3:32 PM by Author "Jetskier" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10804699

RE: EXI 18H15 CF450-V3 (A few problems out of the box)
Those are 2006 Kawasaki 15 F, four cylinder, four stroke fuel injected 1500CC. I love motorcycles and have been riding and racing since I was 8 years old, but had to give them up after i had a kid and could not afford to get hurt. I live 10 minutes from Milford Lake so I have been riding Jetskies since 1993 and have been hooked. A nice boat maybe in the picture in the near future cause now I am getting a little older and you get real sore riding makes it hard to get out of bed Monday mornings to go to work. I just discovered that even the Align tail pitch control may also have slope cause allot of people are doing whats called the fuel tubing mod where you cut a piece of fuel tubing, some use a canopy grommet and place it on the lower ball link, just do a search and you will see some pics, I did it to mine last night and does seem to take the slop out, I will try to test it when I get off work and let you know.
Posted on: 7/12/2011 3:17 AM by Author "Jetskier" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10617389

RE: EXI 18H15 CF450-V3 (A few problems out of the box)
I am usuing the DX7, you are right about the GYro, I have the Detrum Gy401, it does have a hard time, because the slop creates a lot of vibration. i just recently took off the training gear and can do some forward flight but pretty much just hover it now till I replace the tail part. I saw you were in KC after I replied to your post, I am pretty sure the car stereo store you are talking about is Audio Junction.
Posted on: 7/11/2011 3:37 AM by Author "Jetskier" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10615729

RE: EXI 18H15 CF450-V3 (A few problems out of the box)
I have the same problems and I have two, one is built with all the cheap electronics they recommend except I have an Align tail servo, I am using Blue Lipos, the other is just for parts, with the problems it still flys pretty good. I did however order the Align tail thing that has all the slop in it cause both have the same problem. i am a newbee and had the good guys set it up for me. I am also going to replace more parts with Align as needed but so far its still a nice heli and a good value.
Posted on: 7/9/2011 6:36 AM by Author "Jetskier" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10613163

RE: Mini erevo vxl
Try re binding your TX,and going back to Factory settings, and dont use rechargable batteries in the TX, that was my problem.
Posted on: 2/20/2011 1:49 AM by Author "Jetskier" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10349534