RE: New Caldera Video
Added head/tail lights. [:D]
Posted on: 2/8/2011 4:25 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10320449

RE: Earthquake 8e body
There are plenty at rufaster.com for the 1/8 Scale Redcats.
Posted on: 2/3/2011 4:08 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10310377

RE: Wheels and Tires
[quote]ORIGINAL: billymare Those Earthquake wheels have a funky offset...  what are you looking to put them on? [/quote] My Caldera 10E
Posted on: 2/3/2011 11:40 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10309729

RE: Earthquake 8E 1/8 Scale Brushless Electric Monster Truck
[quote]ORIGINAL: nitrosportsandrunner [quote]ORIGINAL: Jhawk19 Can you guys give me the measurements on the shocks for the EarthQuake? Thinking of trying them on a Caldera. [/quote] my earthquake should arrive tomorrow. my friends bought caldera's that will arrive as well. ill compare the 2 truck's shocks and let you know if it can work. [/quote] You da man! Thanks!! Have fun with your
Posted on: 2/3/2011 9:53 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10309478

RE: Which Body Shell?
Great question guys... I like them all, which is why it's a difficult decision. Right now I have a Caldera 10E with a Stampede body. The Stampede body is bit short. It's 15 1/2 inches long and just under 5 inches tall. The Caldera body is just over 17.5 inches long and 5 inches tall. I think the E-Maxx might be a better fit over the Rustler, but I don't know the measurements of either one. Here is the truck before (Caldera body) and after (Stampede body).
Posted on: 2/3/2011 9:13 AM by Author "Jhawk19" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10309163

RE: Which Body Shell?
I found measurements on everything above and they'll all fit. Nothing is smaller than what I have (Stampede) on it now. The TopKick and Raptor are out b/c they're both 20" or more in length. The Caldera being 17.5", I don't want to go much longer than that. The E-Maxx looks like the next longest at 18", so that one and rest should be fine.
Posted on: 2/3/2011 9:13 AM by Author "Jhawk19" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10309384

RE: Earthquake 8E 1/8 Scale Brushless Electric Monster Truck
Can you guys give me the measurements on the shocks for the EarthQuake? Thinking of trying them on a Caldera.
Posted on: 2/3/2011 7:12 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10309143

Which Body Shell?
I want to get one or two shells for my 1/10 truck. Can you guys help me out. Give me your opinion...
Posted on: 2/3/2011 6:43 AM by Author "Jhawk19" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10309089

Wheels and Tires
I'm looking for wheel & tire combos that are the same or slightly larger than a set of Traxxas Talons, 12mm hubs, etc... Traxxas Talons are 4.8 x 2.7 and they're on a 2.8mm wheel. Here are some that I'm looking at, but I don't know the actual sizes. These are Electrix RC Ruckus Tires/Wheels and Earthquake 8E Tires/Wheels. Figured I'd hit the forums so that you guys can give me more information.
Posted on: 2/3/2011 5:26 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10308985

RE: New Caldera Video
I know. Soon...soon. The ground here is still really wet from rain and snow. Even my local R/C track suspended racing this weekend. Looks like we'll be getting more rain this week too. I hope to have some off-road video soon.
Posted on: 1/31/2011 1:28 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10302971

New Caldera Video
[youtube]http://www.youtube.com/watch?v=Pko_epwokdo[/youtube] Enjoy!
Posted on: 1/31/2011 12:12 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10302767

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
Here's the new Stampede body. Painted white, obviously. Looks good!
Posted on: 1/30/2011 3:15 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10300698

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
[quote]ORIGINAL: nitrosportsandrunner also, there are some $15 high-torque metal geared servos on hobbypartz.com. that price includes shipping. more torque than the stock servos! i replace alot of the servos in my RTRs(trucks and crawlers) with those servos. [/quote] Can you give me a part number or link?! Thank you. Oh and here is my contribution to this thread (Video, [b]Picture[/b], & Discussion). Talon wheels/tires added. New body coming soon!
Posted on: 1/29/2011 12:12 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10297447

RE: Caldera Wheel/Tire Options
NICE! The Talons fit great!
Posted on: 1/29/2011 9:11 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10297699

RE: Caldera Wheel/Tire Options
So, the answer is no. The Ananconda tires and wheels fit the Caldera, but they don't "Fit" the Caldera. They look like a monster truck on lawnmower tires. The wheels are the same size, but the tire thickness is waaay off. They look ridiculous. Next up, Talons...
Posted on: 1/29/2011 6:24 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10297443

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
I have the old servo (B7014). Should I order a replacment (3003) now?
Posted on: 1/29/2011 5:52 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10297403

Basic ESC Setup
I am setting up my Caldera 10E. I'm using a LiPo battery. Can anyone give me the rundown on where to set each of the following: 1. Running Mode: Forward Only with Brake Forward/Reverse with Brake Forward and Reverse 2. Drag Brake Force 0% 5% 10% 20% 40% 60% 80% 100% 3. Cut-Off Threshold No Protection 2.6v/Cell 2.8v/Cell 3.0v/Cell 3.2v/Cell 3.4v/Cell 4. Start Mode Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 Level 8 Level 9 5. Brake Force 25% 50% 75% 100% 6. Reverse Force 25% 50% 75% 100% 7. Initial Brake Force Drag Brake Force 0% 20% 40% 8. Neutral Range 6% 9% 12% I don't think 9-10 apply to electric trucks. 11, I can figure out on my own and 12 I'll put at 2 Cells.
Posted on: 1/28/2011 11:00 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10295649

RE: JUST PAYED FOR A NEW BRUSHLESS EARTHQUAKE
I have this one... http://www.hobbypartz.com/60p-dyc-1004.html $24, not bad! I really like it too. It's a very safe charger with lots of options and the display is great! You'll have to find an A/C Adapter though. I use the one from my laptop.
Posted on: 1/28/2011 5:53 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10295006

RE: Caldera 10e
Hey twobnvd, looks like that 'Y' on your keyboard is messed up! [:)] Anyways, I got this program card for my Caldera: http://www.hobbypartz.com/led-program-card-for-brushless-esc.html only $7. At hobbypartz, you can purchase low cost LiPo batteries (4000mAh) for $25 or less. I too have switched to Deans Connectors and I only use the NiMH when my LiPos are down/charging. I have the same charger as nitrosportsandrunner and I love it. Got it at HobbyKing. It didn't come with an A/C Adapter though. I have to use the one from my laptop.
Posted on: 1/28/2011 3:49 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10294858

RE: Convert NiMH Tamiya to Deans?
Perfect. Thanks. I've just read on here that the Tamiya is not a good connector for LiPo's b/c it doesn't allow for the transfer of power that the LiPo's require.
Posted on: 1/27/2011 8:14 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10292583

Convert NiMH Tamiya to Deans?
On the Caldera 10E, the truck uses a Tamiya plug and so does the NiMH battery. I've already purchased two LiPo's that have Dean's Connectors. Can I convert the NiMH battery and the Caldera 10E to Dean's? Is the NiMH Battery junk if I can't convert it?
Posted on: 1/27/2011 7:10 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10292459

RE: redcat caldera, body
I ended up with a Traxxas Stampede body. Got it for $29 shipped. Pic is below. I think I'll paint it white, just to be different (Tired of Red, Blue, & Black). Hope it fits.
Posted on: 1/25/2011 1:54 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10287828

RE: Caldera Wheel/Tire Options
I guess I'll find out. I just purchased 2 sets of Anaconda Tires (2.8") mounted to black chrome wheels. TowerHobbies had a special!
Posted on: 1/25/2011 1:49 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10287818

Caldera Wheel/Tire Options
The Traxxas Jato rear wheels/tires ride on 12mm hexes. Will those fit the Caldera? Or, can I take the Anaconda Tires (2.8") and mount them to the wheel of the Caldera? Does anyone know about any other options?
Posted on: 1/25/2011 6:45 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10286821

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
OK, I picked up the ESC Programmer and a 4000mAh LiPo for $29 (Shipped) from HobbyPartz! Wheels/Tires...The Traxxas Jato rear wheels/tires ride on 12mm hexes. Will those fit the Caldera? Or, can I take the Anaconda Tires (2.8") and mount them to the wheel of the Caldera?
Posted on: 1/24/2011 2:25 PM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10285374

RE: redcat caldera, body
[quote]ORIGINAL: billymare Pretty much any 1/10 truck body...  These are all Caldera 10E's [/quote] Your trucks look good. Where did you buy the extra bodies? I am having trouble finding them online. You guys mention that just about any 1/10 body will fit the Caldera frame...how bout the Revo, Rustler, and Stampede bodies? Thanks!
Posted on: 1/24/2011 11:22 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10284941

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
Do you have part number?
Posted on: 1/24/2011 7:44 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10284566

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
[quote]ORIGINAL: billymare Most 1/10 body's will fit with small mod's Most wheels with 12MM hex will work and I put the upgraded aluminum shocks in mine. [/quote] Where did you get the upgraded aluminum shocks? I'd like to upgrade as well...
Posted on: 1/24/2011 4:11 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10284261

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
I just want to make sure this question didn't get lost in the mix....[8|] I'd like to change the body, tires, and shocks... Anyone know what my options are? Will the Traxxas Rustler body fit the Caldera 10E frame?
Posted on: 1/24/2011 4:03 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10284252

RE: *Official* Caldera 10E Video, Picture And Discussion Thread
I just purchased a Caldera 10E off of eBay for $189.99 (Free Shipping). I'd like to change the body, tires, and shocks... Anyone know what my options are? Also, will this battery work?: http://www.hobbypartz.com/98p-30c-4000-2s1p-hardcase.html Finally, should I get an ESC Programmer? http://www.hobbypartz.com/led-program-card-for-brushless-esc.html I've heard that the Caldera requires some tweaking on the brakes... I'll have to check the Servo when it arrives to make sure I have the most updated S3003. -JHawk
Posted on: 1/23/2011 11:05 AM by Author "Jhawk19" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10282591