|
RE: Top Flite Cessna 182 ARF
I installed a hardwood bearing on rudder control arm and short push rods to stop the flutter.Also I installed baffling on my saito fg 20 to stop the overheating.You do not want to open up the bottom of the cowl because it will decrease the cooling.
Posted on: 7/9/2012 9:30 AM by Author "John H."
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11148738
Memory from 12fg to 8fg
Can memory be moved from 12fg to a 8fg. Thanks John
Posted on: 6/12/2012 6:00 PM by Author "John H."
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=11116205
RE: Oil again!!!
chevron gst 32 is the same. on my third 5 gal pail, p80 se with on problems same bearings.
Posted on: 6/8/2012 4:40 PM by Author "John H."
in the forum "JetCat Turbine Direct Support"
http://www.rcuniverse.com/forum/fb.asp?m=11111687
RE: Is Aeroshell 500 Turbine Oil still the consensus choice
Do not use API TC or JASO F. It gets sticky when it sits for awhile, and you will have to wash the bearings out to start the engine. The oil gets thick like STP. Use TCW 3 or better yet use DTE lite or GST iso 32.
Posted on: 4/24/2012 11:31 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11055754
RE: BUTTONWILLOW SPRING FLING
I can pick you up at wasco L19 friday. John
Posted on: 3/14/2012 7:36 AM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10999665
RE: No Room For UAT...
Use a felt clunk works great. John
Posted on: 2/8/2012 10:41 AM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10949867
FUTABA R5014DPS
Good or bad for Jets Futaba R5014DPS on 50 MHZ John KB6FFJ
Posted on: 1/26/2012 4:48 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10929531
RE: FUTABA R5014DPS
Thank you. John KB6FFJ
Posted on: 1/26/2012 4:40 PM by Author "John H."
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10929519
FUTABA R5014DPS
Good or bad for Jets the Futaba R5014DPS on 50 mhz. Thanks John
Posted on: 1/24/2012 7:18 PM by Author "John H."
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10926109
RE: What allows Kingtech to use diesel where others say you can't?
Winter diesel is diesel #1. I think diesel #1 is very close to kerosene.
Posted on: 12/8/2011 10:56 AM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10849919
RE: Boomerang Sprint Build Thread!
You can use a sheep-skin shammy IN a funnel to remove the water from the fuel. Once the shammy is soaked in the fuel, it will not pass water. This method has been used for many years when fueling aircraft from drums.
Posted on: 11/23/2011 11:29 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10826622
RE: aw-32
chevron gst 32 same as mobil dte lite but has highter flash point. also chevron hipersyn 32 has almost the same flash point as aeroshell 500
Posted on: 11/16/2011 1:32 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10815204
RE: Who's using Mobil DTE light oil?
Try using chevron HiPerSYN iso 32 it has a 28 deg C higher flashpoint then Mobil dte light. Very close to Aeroshell 500.
Posted on: 11/5/2011 11:13 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10798842
RE: P-80 bearing replacement
If it has 6mm nut it needs a new shaft with 10mm nut. Also the stator support ring around the turbine wheel shrinks and locks the turbine.
Posted on: 2/18/2011 11:00 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10347227
RE: Your
Tad and I at Rabbit Dry Lake in front of my Skylane.[IMG]http://img.photobucket.com/albums/v362/deadlemons/P8310016-1.jpg[/IMG]
Posted on: 11/11/2010 1:28 AM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10128186
RE: Happy 235
Semper Fi John usmc
Posted on: 11/11/2010 12:45 AM by Author "John H."
in the forum "Off Topic Forum - Planes/Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10128135
RE: TURBINE OIL
I have been using chevron gst iso 32 in my p80 for over 1 year (150 gals+) with no problems. John
Posted on: 11/11/2010 12:14 AM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10128087
RE: Top Flite Cessna 182 ARF
jmaurin, I think he only takes credit cards. I will call him tomorrow and find out. The sensor will not work with the saito ignition. You have to buy the complete unit from CH Ignitions. I think the price is $99.00. I installed the ch ignition on my engine today and it starts easier with the ch ignition than the saito ignition. When setting the timing, the ch ignition would spark when the engine was barely turning. With the saito ignition, you had to turn it quite rapidly to get a spark. You have to buy the rimfire spark plug because the saito plug will not work with the cap.
Posted on: 5/3/2010 2:40 AM by Author "John H."
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9706237
RE: Top Flite Cessna 182 ARF
CH Ignitions has a flat sensor for FG 20 John
Posted on: 5/2/2010 2:36 AM by Author "John H."
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9703740
RE: turbine oil and fuel
chevron GST oil iso 32 is the same as DTE lite. on my second 5 gal container in my P80.
Posted on: 4/26/2010 7:46 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9691088
RE: • CA Jets V •
land at wasco L19 you can ride with me John
Posted on: 3/23/2010 4:07 PM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9605670
RE: How far do you drive to fly jets?
25 min to buttonwillow L62 and 20 min to poso kern co. L73 John
Posted on: 8/30/2009 1:57 AM by Author "John H."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9055803
Super brain 960 issue
I just got a new super brain 960 and 3800 mAh battery. my friend used the charger to charge one of his batteries but when i plug in my batterie the voltage goes down and say it has completed the charging but the v reads 3. something. any ideas?
Posted on: 7/12/2009 5:31 PM by Author "John H H"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8927005
RE: WIN A FREE Scale Fuselage from V-East & Graupner Helis
enter me. thanks John
Posted on: 12/31/2008 3:55 PM by Author "John H."
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8302955
RE: The Unofficial all things Jet drive thread
Sitting here, waiting for the last part for my brushless powered NDQ Jetboat, wanted to see what the std boat can do. Since i dont have a nice big pool or a pool at all, and only a shower in the house, this must do for now :) [link]http://s245.photobucket.com/albums/gg51/JohnH_DK/RC Jet Boat/?action=view¤t=Jetboat_round_a_round.flv[/link]
Posted on: 9/5/2008 12:17 PM by Author "John H (DK)"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7922843
RE: The Unofficial all things Jet drive thread
[quote]ORIGINAL: DRAGONFIRE81M hope you have a fire extngwasr handy that 3c pack will go up what mah is it do you mine 3s or 3c ?????? [/quote] Lol, its a 3 cells lipo 2200mah 20/30c , found out that my motor is a 3900kv [8D] We have a dude here in DK, he has run the same motor/boat with a 4 cell lipo, dont know how long it ran, but it ran very very well for a while. Sorry, i am new with this electro-business-things :-) am used to play with a lot larger petroldrinking HPI Baja [:D]
Posted on: 9/3/2008 5:15 PM by Author "John H (DK)"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7916741
RE: The Unofficial all things Jet drive thread
[quote]ORIGINAL: DRAGONFIRE81M [quote]ORIGINAL: John H (DK) [quote]ORIGINAL: DRAGONFIRE81M [quote]ORIGINAL: John H (DK) [quote]ORIGINAL: BIG22BIRD this is KEVINS boat, some of you might know him as UNGLEUD , he painted it, but i just finished building it for him. just thought i would show off for him. [:D] [/quote] Damn, that boat is nice, love the flames! the watercooling looks very nice too
Posted on: 9/3/2008 5:00 PM by Author "John H (DK)"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7916698
RE: The Unofficial all things Jet drive thread
[quote]ORIGINAL: DRAGONFIRE81M [quote]ORIGINAL: John H (DK) [quote]ORIGINAL: BIG22BIRD this is KEVINS boat, some of you might know him as UNGLEUD , he painted it, but i just finished building it for him. just thought i would show off for him. [:D] [/quote] Damn, that boat is nice, love the flames! the watercooling looks very nice too, and you have kept the brackets in the bottom, i will keep
Posted on: 9/3/2008 3:06 PM by Author "John H (DK)"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7916327
RE: The Unofficial all things Jet drive thread
[quote]ORIGINAL: BIG22BIRD this is KEVINS boat, some of you might know him as UNGLEUD , he painted it, but i just finished building it for him. just thought i would show off for him. [:D] [/quote] Damn, that boat is nice, love the flames! the watercooling looks very nice too, and you have kept the brackets in the bottom, i will keep it too. I just recieved my three jetboats, found them on our local qxl, got them for about 40$ a piece :-) I have started to gut the first one now, and i have the electrics for it, only missing the coupler between the engine and the drive. [IMG]http://i245.photobucket.com/albums/gg51/JohnH_DK/RC%20Jet%20Boat/Jetboats.jpg[/IMG] [IMG]http://i245.photobucket.com/albums/gg51/JohnH_DK/RC%20Jet%20Boat/BrushlessLipo.jpg[/IMG]
Posted on: 9/3/2008 2:52 PM by Author "John H (DK)"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7916293
RE: Smartech 4x4 NEW Thunderbolt buggy video
[quote]ORIGINAL: hellya So I installed my new engine and reinstalled the stock clutch bell and carrier...... the play is less (but there is still play) and the sound is almost gone?? ...........................................will be doing test runs tommorrow.......................................... [/quote] Nice engine! that should make it move [;)]
Posted on: 5/20/2008 11:37 AM by Author "John H (DK)"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7518977
| 
