RE: w h 84
Bob, what do you want for it? This is an old thread, but I have a V1 Edge that could use a new cowl if I ever decide to restore it. Jon
Posted on: 6/28/2012 8:19 AM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=11135071

RE: Airplane identification
First one might be a Sig Kiwi without the canopy. It looks similar, but it also has a look that is familliar, but I can't put my finger on it. The second one looks like a Seagul Superstar...maybe...
Posted on: 11/6/2011 6:55 PM by Author "Jonathan Ott" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10800102

RE: Help! Warped spar
Send an e-mail to Great Planes: airsupport@greatplanes.com and tell them you need a new spar for your PT60 as it was warped in the kit (e-mail that pic too) and they just might send you a new spar for free...can't hurt to ask. Jon
Posted on: 6/24/2011 9:28 AM by Author "Jonathan Ott" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=10590229

RE: Wild Hare Electrics
JonPa...check your PMs Jon
Posted on: 4/25/2011 1:01 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10484222

RE: Proud new owner...NNIB, OS, 35% Giles (R/W scheme)
WOW!!! Has it been almost a year since I posted in this thread??? Anyway, it is done, except for a quick engine tune. I tried running the engine last week, but a bone dry carb didn't want to cooperate and I put it back in the workshop and did a little PM on the carb to get it wet. Graphics are on it. I'll mount the cowl back up once I get it running. I have it balanced right on the front edge of the wing tube. Jon
Posted on: 4/23/2011 3:03 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10480681

RE: RC in louisville
Check out [link=http://www.louisville-hobbyshop.com/shop/]Hobby World[/link] 104 Vieux Carre Drive Louisville, KY 40223 (502) 749-7879 Rob and Scott will take care of you. Tell 'em Jon Ott sent ya. Jon
Posted on: 4/14/2011 7:43 AM by Author "Jonathan Ott" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10462140

RE: Death of 540 Egde V1
I know this is an old thread, but would you happen to still have the canopy (if it survived)? Thanks, Jon
Posted on: 3/1/2011 2:17 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10372600

V1 Edge canopy needed
I'm retiring my ARMY STRONG Edge and putting it on display on Ft. Knox, but need a canopy for it. Mine has a light bulb burn in the top, right above the pilots head. Anyone have a crashed airframe or spare canopy laying around someplace?
Posted on: 3/1/2011 2:04 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10372570

RE: Need help to ID nitro motor
Most likely a racing motor for GS racing on alcohol. May want to post over in one of the racing forums, bet you get an answer over there. Jon
Posted on: 2/17/2011 11:55 AM by Author "Jonathan Ott" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10343257

RE: 1/3 flybaby bibe
Lazyace...I just noticed that somehow the lower case letter got flipped upside down when you type "bipe" but not in "upper" in your first post, and in the title of this tread. Sorry, just having a little fun. Lots of folks call our two-winged airplanes "Bibe" instead of "Bipe" (which is shorthand for "[link=http://en.wikipedia.org/wiki/Biplane]Biplane[/link]" )
Posted on: 2/17/2011 11:49 AM by Author "Jonathan Ott" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10343235

RE: JR tansmitters
[:D]
Posted on: 2/5/2011 8:12 AM by Author "Jonathan Ott" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10314192

RE: JR tansmitters
[quote] I think there is a 3rd class radio license requirment to open the radio up. Just thought you wanted to know. Jason [/quote] Jason, if you had to have a 3rd class Radio License to open it up, then there are a lot of folks in trouble for taking the back cover off to tighten the gimbles. ;) Hircflyer: what are you wanting to do on the inside anyway? Jon
Posted on: 1/30/2011 4:34 PM by Author "Jonathan Ott" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10300895

RE: need help
BME Engines 20 Marshall St South Hutchinson, KS 67505 Business Phone: (620) 321-0065 Business Hours: 9am to 5pm CST Monday thru Friday http://bmeengine.com/index.htm
Posted on: 1/20/2011 9:12 AM by Author "Jonathan Ott" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10276067

RE: Can anybody identify this plane?
That ain't a 4*40 (or 60) Tail is wrong. Turtle deck is wrong. Wingtips are wrong. Cowl is wrong. Deck in front of canopy area is wrong. Looks like it's Birdi'ish, or Andrews...maybe Goldberg...
Posted on: 1/13/2011 11:43 AM by Author "Jonathan Ott" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10260703

RE: Edge 540 v2 rebuild
[sm=thumbs_up.gif]
Posted on: 1/5/2011 7:37 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10242726

RE: Edge 540 v2 rebuild
Looks good, but you need to put the pilot in the back seat. Front seat is for passengers [:D] Jon
Posted on: 1/2/2011 11:55 AM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10234321

RE: Servo Assist - Invention Needed
[color=#FF0000][size=7]BOOST TABS[/size][/color]
Posted on: 12/20/2010 9:48 AM by Author "Jonathan Ott" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10207855

RE: Wild Hare Electrics
Mine was difficult and stickie too at first, but it'll loosen up with use. Jon
Posted on: 12/20/2010 8:40 AM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10207760

RE: pull-pull rudder cable question
[quote]ORIGINAL: blikseme300 I get all my pull-pull cables from the fishing department at my local WallyWorld. The also sell the ferrules and crimping pliers. No need to buy ''hobby speciality'' cables. Bliksem [/quote] Same here! Jon
Posted on: 12/6/2010 6:48 AM by Author "Jonathan Ott" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10179827

RE: Holiday Special Electric Edge or Slick half price!
Tom, I'm coming down again Dec 8-15. I might squirel away a Benjamin and swing by the house an pick up a spare [:D] Heck, I may just bring a plane with me and try to steal some flight time when I'm there. Jon
Posted on: 11/24/2010 2:55 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10157037

RE: Looking for 50 cc Warbird ARF - Suggestions
http://www.rcuniverse.com/forum/m_10006924/tm.htm
Posted on: 10/14/2010 10:46 AM by Author "Jonathan Ott" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10068085

Kitty Hawk Models (Home of the "Sky Knight 6")
I'm origionally from Paoli, IN and was there visiting my mother this weekend. Conversation came around to Paul Clements and Kitty Hawk Models. Turns out that Paul had a bad fire at his place a couple of months ago, and Paul was burned badly trying to fight the fire. I cannot find any info on what happened or the extent of the damage, but from what my mom said, he lost his building that may have had all his molds and equipment, to include all his personal airplanes and stuff. Mom said Paul lost his wife a couple years ago too (natural causes). Last she heard, he was in a local nursing home, recovering from the fire (major burns to his arms, face and legs) and is learning to walk again. Please keep Paul in your thoughts. If I get anymore information, I'll pass it along. Jon
Posted on: 10/11/2010 2:26 PM by Author "Jonathan Ott" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10061852

RE: Box diemensions
No, just have your caller inform the judges "Sequence start" (they are sitting a few feet behind you) and go for it. "Sequence complete" after drawing your line after the last figure, then climb back up calm your nerves and fly the sequence again for that round. Jon
Posted on: 9/30/2010 12:17 PM by Author "Jonathan Ott" in the forum "IMAC"
http://www.rcuniverse.com/forum/fb.asp?m=10037989

RE: Wild Hare Electrics
I had my e-Slick 540 out again last night. I'm using one of Tom's 6c A123 packs, and I think I have my CG just a little too far aft. It flies great at speed, but gets snappy when I slow it down. I also broke [i]another[/i] set of landing gear when I got it too slow on landing. You'd think that falling from 3' at landing speed, directly on the gear wouldn't snap a gear leg off, but it did. Better to loose a gear leg than have to repair the gear plate and some stringers, and maybe a hole punched through the wing. Tom, I'll be ordering another set of CF gear for it soon (gotta get my allowance first [:D]) Jon
Posted on: 9/30/2010 12:08 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10037961

RE: IDENTIFY THIS AIRPLANE....
Citabria's have diehedral, Decathalons do not. Jon
Posted on: 7/23/2010 11:34 AM by Author "Jonathan Ott" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9883262

RE: Getting Started in Gas
I'm sold on Wild Hare planes...take a look: From left to right: 28% Edge 540T V.1 (DA50-R), E-540 Slick, 35% Giles G-202 V.1 (RCGF 100), 29% Extra 300S V.2 (DL-50). Jon
Posted on: 7/23/2010 10:14 AM by Author "Jonathan Ott" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9883080

RE: Wild Hare Electrics
OOps...next hiccup...no mounting screws to mount the motor "X" mount to the motor itself. Bolts, blind nuts and washers are there to mount the motor to the fuselage, but not for the "X" mount to the motor. Gotto go to Lowes anyway [:D] Jon
Posted on: 6/26/2010 3:52 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=9828264

RE: Wild Hare Electrics
Okay...Ailerons are hinged. [:D]
Posted on: 6/26/2010 3:46 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=9828256

RE: Wild Hare Electrics
My Slick is coming right along. The only hiccup I've had so far is a broken stringer from shipping (took about 45 seconds to fix) and my slots were not cut for the elevator contol horns (took about 10 minutes to slot them). Tail is all hinged now. Getting ready to move up front and mount the motor. Jon P.S. I have maybe about 1.5 hours time in this thus far...maybe... :)
Posted on: 6/26/2010 3:24 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=9828224

RE: Wild Hare Electrics
I saw this answer someplace, but can't find it now. 4cell, 3500~4000mAh, 25c are the packs of choice (I know some of you are going 6 cell...[8|] ) Just what is being used out there? Jon
Posted on: 6/22/2010 2:59 PM by Author "Jonathan Ott" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=9819883