RE: Futaba MC 9100A ESC
Anyone tried the braking with a Hi-Max 210 type outrunner ? More braking without the noise would be great. Is this ESC suited for this type outrunner.
Posted on: 9/17/2012 11:20 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11231283

RE: 44th Annual RCRC Pattern Contest, Huntsville, AL Sept 15-16
Great time thanks guys. Kirk
Posted on: 9/16/2012 1:02 PM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11230168

RE: BJCraft Episode
What is the thinking behind not having wing adjusters in these planes. Are they a o-o setup or is there incidence in it as it comes?
Posted on: 9/13/2012 1:46 PM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11227541

RE: Babylon.com
Malwarebytes took it off of my computer.
Posted on: 9/8/2012 8:30 PM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11222359

RE: airtronics SD 10 G -jumpy servos.
More info here, I had the same problem with ATX 94746 using all ATX gear and could not use them. http://www.rcuniverse.com/forum/m_10659777/tm.htm
Posted on: 9/4/2012 12:39 PM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11217235

RE: 94772's jittering in ailerons
Great news . I will be in line when they come out.
Posted on: 8/31/2012 4:44 AM by Author "KGSS28" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11212418

RE: Sebart's new pattern ship MYTHOS
discountlipos, is this plane designed for the Contra Drive?
Posted on: 8/30/2012 10:14 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11211635

RE: 94772's jittering in ailerons
I hve a set of 94746 servos that did the same thing. Sent back to service and was told nothing wrong with them. But I am sorry they sit in the wing and vibrate so bad it can be felt on the whole plane. The aileron just twitches up and down. I have had digital servos from other brands and yes they all buzz a little but these things are over the top. No more for me at almost $100.00 each No way I would try to fly them in my pattern plane.
Posted on: 8/30/2012 9:39 AM by Author "KGSS28" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11211596

RE: St Clairsville Wrap Up
Thanks
Posted on: 8/28/2012 9:09 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11209038

RE: St Clairsville Wrap Up
Who is the guy flying the Monolog in Intermediate ? I would like to talk to him and get his impressions on the plane and set up .I have a new one almost ready to fly. Thanks Kirk
Posted on: 8/28/2012 8:54 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11209018

RE: New pattern ship recomendation
Monolog build thread . http://www.rcuniverse.com/forum/m_10103764/mpage_1/key_/tm.htm
Posted on: 8/23/2012 9:30 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11203454

RE: New pattern ship recomendation
I am in the process of completing a Monolog . I find the quality to be great with no issues with the build . I also bought the combo from F3A, Chris and Mike are great to deal with you will not have any problems. I hope to have the maden flight next week . B J Craft website http://rcone.kr/board/index.html?id=bjreference1&page=2&no=2
Posted on: 8/21/2012 1:47 PM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11201210

RE: NATS 2012 : Let the journey begin!
Wow Chuck that is really Great Looking. What are the specs.
Posted on: 7/14/2012 8:14 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11154859

RE: BJ Craft Monolog 110 for 2012
Chris will you have the 2M Monolog for sale at the NATS ?
Posted on: 7/10/2012 8:36 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11149961

RE: Pattern ship winglet.
That is what mine does . Still learning to work with it . Thanks Kirk
Posted on: 7/9/2012 8:40 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11148671

RE: Pattern ship winglet.
Chuck can you describe the effects on your plane in crabbing and wind and speed ? I want to compare it to my Pentathlon. Thanks Kirk
Posted on: 7/9/2012 5:22 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11148454

RE: Airtronic SD 10 G charger- battery failure in flight
+ 1 on what Chris said . Works great
Posted on: 7/4/2012 10:45 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11142749

RE: Spark Eliminator
Thank You .
Posted on: 6/10/2012 1:09 PM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11113445

RE: Spark Eliminator
Anyone tried this on Castle Controlers ?
Posted on: 6/10/2012 7:50 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11113165

RE: 9303 Fixed Endpoints
This is what I used to find them. Don't remember them off hand. http://www.castlecreations.com/support/documents/setup_fixed_endpoints.pdf
Posted on: 6/2/2012 7:21 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11103669

RE: Himax 6330-F3A Pattern Motor
Don, I looked at all the connections. All I can see is a litthe black on the tips from the spark . They do not feel pitted or distorted . I did find a couple that the blade is loose in the plastic boby. I am using Deans are there better connectors to use ? In reading your post about bearing replacement you talked about end play front to back. This motor has some, the only thing I can compare to is an Axi 5330 that has none that I can tell. I feel no side to side movement . I have not had a temp over 90. Temp increase could be it we have been in the mid to upper 80 this week with pretty high humidity. What props ? I liked the 20x13, the motor seems peppy and responive . I have a 20.5x14 that semed slugish to me. Neither props pull over 65-68 amps Thanks for the help Kirk
Posted on: 5/18/2012 9:21 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11085795

RE: Himax 6330-F3A Pattern Motor
Guys I have a Himax 200 with only about 80 -100 flights on it that seems to be slowing down and not making the power it did just days ago. There also does not seem to be any increase in power from about three quarter to full throttle. I have not changed anything and have tried several different batteries with no improvement . Prop is 20x13 and CC Ice 80 controler. Thoughts Please Thanks Kirk
Posted on: 5/17/2012 10:40 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11084536

RE: Parallel Charging
Vern or anyone else, How do you program the 10xp to charge a true 10s pack with two ballance taps ? Kirk
Posted on: 5/7/2012 11:57 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11071828

Parallel Charging
Anyone have any expirence with parallel charging . I notice several boards on the market to do this. I was thinking about a second Cellpro 10XP but this might fit the bill in order to charge faster. Are they safe, does it ballance all the cells, do you know how much was put in each pack? What if you have a problem with one battery durning the charge , will they all fry? Thoughts, comments welcome Thanks
Posted on: 4/17/2012 10:19 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11045788

RE: HiMax 6330-200 ESC settings
This is what I used. Great motor as long as you are not to heavy. http://maxxprod.com/pdf/HC6330-200.pdf
Posted on: 4/10/2012 11:37 AM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11036278

RE: 2nd Annual D2 vs D3 Shootout March31-April 1
The esc will shut down if you turn off RX or TX and I can kill it on a switch also. I am using ATX SD 10 G.
Posted on: 3/26/2012 10:56 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11015740

RE: 2nd Annual D2 vs D3 Shootout March31-April 1
What is a fail safe check ? I have never had a fail safe programed in my radio. My CC controler shuts down with loss of signal. Will that do? Really don't want to fool with things this close to the contest.
Posted on: 3/26/2012 10:34 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11015715

RE: 2nd Annual D2 vs D3 Shootout March31-April 1
Hey Victor what direction do you face when flying at this field ? Any issue with sun or anything else ?
Posted on: 3/20/2012 10:02 AM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11008325

YS To Electric conversion
Can anyone tell me about how much weight the total setup to for the YS is ? Including everything it takes to run it. I an considering a conversion ,trying to figure out what I have to play with but don't want to strip the plane to weight it all. Thanks
Posted on: 1/11/2012 2:56 PM by Author "KGSS28" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10903969

RE: New to Pattern Flying..... Few Basic Questions.
Insightrc.com Mark Hunt Designs . Great kits that are great flying.
Posted on: 10/21/2011 3:57 PM by Author "KGSS28" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10776595