|
RE: Something Extra Throws
Love Wire, I had to change the post, looked good in the editor, not in the post. It now better shows the low & high rates. I'm worried the low rates may still be to much for first flight. Thanks, KW_Counter
Posted on: 5/18/2013 7:48 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11515111
Something Extra Throws
that not enough throw can also be disastrous. Thanks for the help, KW_Counter
Posted on: 5/18/2013 7:46 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11515093
RE: FP or LA
with the FP or TT. Good Luck, KW_Counter
Posted on: 9/18/2012 7:23 AM by Author "KW_Counter"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11232292
RE: BEC 5amp enoguh for 6 servos
Remember, the higher the voltage the higher the current draw. If you lower the output to 5 volts the better chance the 5 amp BEC will work. Good Luck, KW_Counter
Posted on: 9/12/2012 5:33 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11225952
RE: HEAD REPAIR
Clarence Lee - I don't have contact info but he advertises in the magazines. Good Luck, KW_Counter
Posted on: 9/11/2012 12:24 AM by Author "KW_Counter"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11224678
RE: LVC IC PCB for 5S Lipo
Joe, I think you are over thinking the situation. I to have converted my Ryobi to LiPo. I didn't put in any alarm circuitry. When your voltage gets down to 3.3 vpc you will be so dissatisfied with its performance you will charge it. Just my opinion and experience. Good Luck, KW_Counter
Posted on: 9/8/2012 7:57 AM by Author "KW_Counter"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11221714
RE: How many wing bolts?
The purpose of using nylon bolts is so they will pop off in a crash. The separation of main parts may lessen the damage on one or both of them. I would go with the designers original plans. Good Luck, KW_Counter
Posted on: 9/4/2012 7:28 AM by Author "KW_Counter"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11216851
RE: How to Fiberglass ?
Paul, Glad to see you're still around! Also glad to see you're so busy. Someday you'll get back into the swing of things. Thanks for all your help to everyone, KW_Counter
Posted on: 9/2/2012 6:22 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11214305
RE: Airborne Models
Ditto Ditto KW_Counter
Posted on: 9/2/2012 6:12 AM by Author "KW_Counter"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11214298
RE: power supply output .30v over. how to reduce?? PLEASE HELP.
There should be a way to adjust the voltage. If that doesn't work then putting a diode in series will drop the voltage .7 volt. Make sure it can handle the current being drawn. Good Luck, KW_Counter
Posted on: 8/30/2012 7:16 AM by Author "KW_Counter"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11211443
Wire Bending Jig Use
and have some basics I'm sure my own creative juices will begin to flow. Thanks for the help, KW_Counter
Posted on: 8/29/2012 6:28 AM by Author "KW_Counter"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11210113
RE: Subversive RC clubs
Please, go flying and stop thinking - you are not qualified to do so. KW_Counter
Posted on: 8/23/2012 5:48 AM by Author "KW_Counter"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11203153
RE: 4 Stroke Throttle Linkage
Ken, Thanks. The DuBro device looks nice but a lot of work. Especially compared to bending wire. Thanks, KW_Counter
Posted on: 8/21/2012 8:45 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11200886
RE: Electric Planes
them someplace safe. Good Luck, KW_Counter
Posted on: 8/21/2012 7:10 AM by Author "KW_Counter"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11200781
4 Stroke Throttle Linkage
To hook up the throttle on my OS 4 stroke I need to pass the throttle and then bend the wire back 180 degrees to the carb. I understand this is a common situation with 4 strokes. I can either put 2 90 degree bends in the wire or use one curve back. Which is better and why? Thanks, KW_Counter
Posted on: 8/21/2012 7:03 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11200772
RE: How to Fiberglass ?
in a long time. Good Luck, KW_Counter
Posted on: 8/21/2012 6:56 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11200767
RE: Need help with RC products
, KW_Counter
Posted on: 8/21/2012 6:41 AM by Author "KW_Counter"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11200750
RE: Glow engine woes...
Does the original owner live near you? I had a similar sounding problem after moving from the Imperial Valley, below sea level, to Lake County, above 1,000 feet. When I switched from 10% nitro to 15% the problem was solved. Good Luck, KW_Counter
Posted on: 8/20/2012 7:27 AM by Author "KW_Counter"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11199587
RE: Glow Tank Stopper Leaks
. (No reference to hot air intended here.) :-) Good Luck, KW_Counter
Posted on: 8/20/2012 7:07 AM by Author "KW_Counter"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11199562
RE: Safe voltage to fly
I agree with P-40 Driver. A battery will hold at its nominal voltage of 1.2 volts per cell for a long time. Once it gets below that it can fall off rapidly. And yes, it must be checked with a loaded meter. I make my own loads for my $18 Wal Mart multimeter. I use about 24 ohms so I get about 200 mAh. Using 300 mAh load would be better. Good Luck, KW_Counter
Posted on: 8/20/2012 6:41 AM by Author "KW_Counter"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11199530
RE: LiPo rookie
the source of the problem; is it the battery or the meter? Good Luck, KW_Counter
Posted on: 8/19/2012 6:36 AM by Author "KW_Counter"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11198543
RE: Help me understand lipo run times
Luck, KW_Counter
Posted on: 8/19/2012 6:25 AM by Author "KW_Counter"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11198536
Hybrid-Air/Coota Throws
I have a Hybrid-Air I am ready to get airborne. Does anyone have any suggested throws? The instructions don't list any. Thanks, KW_Counter
Posted on: 8/17/2012 4:37 PM by Author "KW_Counter"
in the forum "Seaplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11197271
Spectra 2.4 Module Blinking Blue
I have a 2.4 Spectra module in an Optic 6 transmitter. When I push the button on the module and turn on the transmitter I get a solid red and then it goes to a flashing blue. It prevents linking to my receiver. Screen voltage is 10.1. Any idea what the problem/solution is? Thanks, KW_Counter
Posted on: 8/17/2012 9:34 AM by Author "KW_Counter"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=11196878
RE: Twin Cylinder Engine Question?
Interesting, Saito even says their .60 twin 4 stroke has the power of a .40 2 stroke. $650 vs. $100? I didn't even get into weight and size comparisons. Good Luck KW_Counter
Posted on: 8/13/2012 7:49 AM by Author "KW_Counter"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11191530
RE: Help with identifying connectors!
Do a web search for Anderson Power Poles. They come in many varieties. The small ones, as shown, come in 15, 30 & 45 amp. The only difference is the lug size for bigger wire. You will probably be able to beat Tower's prices and have better choices. I use them on my planes and chargers and got by brother-in-law to use them on his trucks. Good Luck, KW_Counter
Posted on: 8/11/2012 6:41 AM by Author "KW_Counter"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11189197
RE: After Run Oil into a 4 Stroke
If I inject through the breather will the oil get up to the valves? Thanks, KW_Counter
Posted on: 8/8/2012 6:05 AM by Author "KW_Counter"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=11185365
RE: 40LA low speed tuning...i KNOW right?
%. Good Luck, KW_Counter
Posted on: 8/8/2012 6:01 AM by Author "KW_Counter"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11185356
RE: Review Scams?
, KW_Counter
Posted on: 8/5/2012 7:34 AM by Author "KW_Counter"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11180578
After Run Oil into a 4 Stroke
Bax, What is the proper way to inject after run oil into a 4 stroke engine? Most carbs seem to be pointing down. Not as easy as a 2 stroke. How much oil should be injected? If the engine is cowled, are there alternate methods that can be used? May I reprint part or all of your sticky on use of after run oil in our clubs newsletter? Thanks for your help! Sincerely, KW_Counter
Posted on: 8/3/2012 2:23 PM by Author "KW_Counter"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=11179945
| 
