|
RE: wireless trainer system
A delay such as this is normal even with a trainer cord. This is why it is always suggested that when control is given over to the student, you have your craft at a high altitude to provide for some margin of error on the students part. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/18/2009 4:19 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9263347
RE: 6EX fault
Please see the Service Advisory for this transmitter on our website, you will need to return this to your closest service center for updating: http://2.4gigahertz.com/techsupport/service-advisory-tm7-7c-6ex.html Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/18/2009 4:00 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9263285
RE: S3801 servo
The S3801 is capable of approximately 125 degree rotation, we cannot recommend or offer help in modifying this. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/17/2009 4:54 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9260758
RE: Futaba 10CGA Problems
When using the R6106HF, you will want to make sure that if you are using digital servos, you have the receiver switched to High Speed Mode, if you are using normal servos, you will need to switch it to Normal Mode. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/17/2009 4:52 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9260753
RE: Automatic rudder dual rate on the 10C ?
will override the one set by the throttle. Sincerely, Krysta Product Development & Support Specialist Futaba
Posted on: 11/17/2009 1:12 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9260315
RE: 2.4 Glitching on Futaba 10 C with 14 ch. Rx
You might want to check out our "sticky" concerning the 14ch receiver here at the top of our page: http://www.rcuniverse.com/forum/m_7365443/tm.htm Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/4/2009 2:15 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9227886
RE: 8FG configurations
I am sorry, but Futaba does not "split" their systems out this way. They are sold as transmitter/receiver combos, either with or without servos and receiver battery. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/2/2009 4:54 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9223105
RE: Y connector voltage question.
The connector on the receiver can handle the load fine. Many many modelers use high torque, high current draw servos off of a Y connector with no problems. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/2/2009 4:53 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9223102
RE: Futaba 9303
The S9303 was sold from approximately 1995 to at least 2001. This is a nice run for a servo and they were not discontinued due to any type of problems. What you are describing sounds as though it could be bad pots, as these are older servos, they are most likely worn. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/2/2009 4:50 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9223097
RE: 2.4 receiver antenna
You can purchase replacement parts for your Futaba radio from your local Great Planes authorized hobby store. Or directly through Futaba Services by calling 217-398-8970 opt 2. Depending on the receiver you are using the cost of the antenna will be approximately $8.00 or $9.00. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 11/2/2009 4:33 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9223056
RE: 6EX joysticks for 7U?
While the 6EXA gimbal will not work in the 7U radio, you can order the gimbal assembly from us. The part numbers are: HSP73501 STICK ASSY ST-36 (SP) retail price $ 39.95 HSP73502 STICK ASSY ST-36 (RA) retail price $ 39.95 To place an order you can either call our Support line at 217-398-8970 opt 2, or email them at support@futaba-rc.com, or you can also fax at 217-398-7721. Sincerely, Krysta
Posted on: 11/2/2009 4:25 PM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9223042
RE: Futaba 8FG
Hi Geoff, It is just the one transmitter, 8FG, as it has both heli and airplanes menus. You would just want to order the stock number of the package, either heli (FUTK8001 or air (FUTK800) that you desire. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/30/2009 10:27 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9214816
RE: 8FG Question
Hi modtron, Please see my FAQ on this: http://www.14mz.com/faq/faq-14mz-q851.html Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/29/2009 9:42 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9211934
RE: Software switch problem
Yes, this needs to be sent into our Service Center. You may have a loose connection on the switch. For information on sending items in to us please see our sticky at the top of our forum page. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/26/2009 9:12 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9202765
RE: AFR dual rate set up help needed.
Could you please let us know what transmitter and receiver you have? Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/20/2009 9:38 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9187767
RE: 12Z strange thing happened.
We are not sure why something like this happened. but in any case, it is best to send this in to be checked out. Here is the info for our service center: http://www.futaba-rc.com/service.html Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/20/2009 9:37 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9187763
RE: Futaba Short Crystals?
No, there is no difference in the physical size of the "short" or "regular" crystals. They are listed as short crystals, due only to their shorter range, Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com [quote]ORIGINAL: Mouton I would like to know if the ''short'' type of Rx are smaller
Posted on: 10/20/2009 9:36 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9187757
RE: buddy with 2.4 and 35mhz
Yes, this is possible, but if your Skysport was manufactured before 1997. it may not be compatible. To correct this, you would need to send the older transmitter into your nearest Futaba Service center to have it updated. This update will resolve any problems you might encounter. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/20/2009 9:21 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9187729
RE: Converting 14MZ to 2.4MHZ
Hi Amram, You will need to download the latest software update for your 14MZ. It is version 1.41 and after you have downloaded this, you will simply need to purchase a TM-14 module and compatible receiver. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com [quote]ORIGINAL: amram Hello, I am interested to convert my old 14MZ radio
Posted on: 10/20/2009 9:16 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9187720
RE: Battery Sharing with RX Channel
Answered in main forum.
Posted on: 10/20/2009 9:12 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9187713
RE: Channel Sharing with Battery
Please see the FAQ on our website: http://www.futaba-rc.com/faq/product-faq.html#q318 This FAQ is listed for an 8 channel receiver, but this is true and works for all of our receivers. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 10/20/2009 9:11 AM by Author "Krysta"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=9187710
RE: futaba AM transmitter use-able with any futaba receiver?
Hi cydog510, You cannot place a 75Mhz crystal into a 27Mhz receiver and expect it to work. Your current receiver was manufactured and tuned to 27Mhz, it will not recognize a 75Mhz crystal. The coding is not the same between 75Mhz and 27Mhz. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com [quote]ORIGINAL: cydog510 i have a AM 75mhz
Posted on: 9/29/2009 9:44 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132682
RE: futaba t6exa radio
Here is a link to the manual from our website: http://manuals.hobbico.com/fut/6exa-manual-v1_1.pdf If you check page 18, it will tell you how to change the Mode in the transmitter. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 9/29/2009 9:34 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132667
RE: CAMPac initialization.
Please see the FAQ on our website regarding transferring models from the older 9C to the 9C Super: http://www.futaba-rc.com/faq/faq-9c-q819.html Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 9/29/2009 9:30 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132657
RE: Servo Compatibility
modes, depending on servos installed. Sincerely, Krysta Product Development & Support
Posted on: 9/29/2009 9:26 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132647
RE: 12FG Erratic Servo Functions
Please see our sticky on our page here "Futaba Product Advisory- R6014FS Receiver", you may want to try different servos to see if the problem still exists. http://www.rcuniverse.com/forum/m_7365443/tm.htm Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 9/29/2009 9:24 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132642
RE: Futaba t6ex won't start
Hi AlexmUK, From what you are describing, I would contact the place that you purchased this. If you are not getting any power output or display and this is a new transmitter, then it will be under warranty. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 9/29/2009 9:19 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132631
RE: Futaba PK-FSM FSS question
Hi tmt32mj, Yes the FSS module ( FUTL8905 ) for the 3PK will work in your 3PJ. Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com
Posted on: 9/29/2009 9:17 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132627
RE: 6016 Rx Problem
Yes, that is correct, or you can see our website for more information on sending this in to us since it was purchased from Tower Hobbies. The link to our page on the Futaba site is: http://www.futaba-rc.com/service.html Then just click on the link "completed service request form" Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA
Posted on: 9/29/2009 9:10 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132612
RE: overseas purchases and warrenty
Hi Tommo1965, Yes, that is correct, or you can see our website for more information on sending this in to us since it was purchased from Tower Hobbies. The link to our page on the Futaba site is: http://www.futaba-rc.com/service.html Then just click on the link "completed service request form" Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA
Posted on: 9/29/2009 9:09 AM by Author "Krysta"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=9132608
| 
