RE: New MBX6 owner looking for tips
7-5-2 in the diffs, no little o-rings. Stock shock setup and placement is good. Arms set to level after drop test. Rear 0-2.5 toe block, front of rear toe block top placement for hinge pin. Lower hole for hubs, long wheel base. 12mm droop all around. Stock setup for camber, upper front arms spaced forward for less camber (off power steering). 0 front block. It's rock solid with this setup. I'm in the top 4 every week among 25 other bugs with this setup. Basically this makes the car is extremely forgiving and easy to drive fast. Plenty of droop to soak up any imperfections and still turns great. The rear of the car won't wag down the straight. About the durability, I bought the kit when it first came out and the updated kit later and haven't broke anything.
Posted on: 1/22/2010 5:01 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9438797

RE: FUEL or Electric??
First of all I like and own both, nitro and brushless bugs. The pure and simple truth is that electric power has surpassed nitro power. Right now there is only a narrow margin between the two but the gap grows wider every day. A nitro motor is a mechanical thing, we've got about all the power we can out of it. For electric power it's the tip of the iceberg. Batteries keep getting lighter with more power and run time. Brushless motors will get smaller and more powerful. There is more adjustability and fine tuning available with a brushless motor and ESC compared to a nitro, this is a fact that is overlooked by most. Electric is faster, more dependable and more tunable. I will always love my nitro but the future belongs to electric, like it or not. Foamy, You're a racer, Cummins is a pullstart, climbing on dirtpiles basher. You guys are just different. But honestly Cummins, you got alot of your facts wrong.
Posted on: 1/14/2010 10:00 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9416826

RE: Mini Ultra Stick
With my PNP using the stock 10 7 prop I was only getting about 10 minutes flight time and the ESC and battery would get a little warm. I tried a Master Airscrew 10 6 and it doubled my flight time, the ESC stayed cool and the plane will hover and pull out of it strong. With the stock prop it wouldn't even come close to hovering. This prop is more rigid than the stock prop, I think it's not usually for electrics. I did a search and didn't see anyone posting using this prop.
Posted on: 7/21/2009 1:00 AM by Author "KyJoe340" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8950888

RE: Mini Ultra Stick
Got in 2 flights today. The PNP is underpowered for sure but still alot of fun. Speed control worked fine and didn't get too warm. I got about 10 min on my 2100's, I was expecting more. Trying out my fly cam one tomorrow. Also, I love how this plane comes apart and goes back in the original box in about 2 minutes.
Posted on: 7/17/2009 1:49 AM by Author "KyJoe340" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8940253

RE: Mini Ultra Stick
Bought a PNP MUS today and was wondering if anyone had issues with the speed control. I usually go with Castle speed controls but couldn't pass up a good deal on this PNP. Did a search but didn't come up with much.
Posted on: 7/15/2009 2:15 AM by Author "KyJoe340" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8934716

RE: Radio Dillema Futaba 3PKs 2.4 vs. Spektrum DX3r
I couldn't fix glitching on my Fasst system. I would strongly recommend the 3PKS + Spektrum. I went with M11 + Spektrum.
Posted on: 1/1/2009 12:54 AM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8304567

RE: Question About Using A Rubber Band
I've been using a spring but it can sometimes rub the carb boot. I'm gonna try the hair band thingy, looks good to me. I hardly have to go to my LHS anymore, if I run out of thread lock I can use my wife's clear nail polish and now this hair band trick.
Posted on: 12/31/2008 11:55 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8304449

RE: Losi 8ight 2.0 or Mugen MBX-6?
[quote]I beg to differ. [/quote] My MBX5R at 6 gallons is tighter than my new 2.0 at 4 tanks! Let me go back a little further, I had a RTR 8ight 2 yrs ago that got so sloppy loose it's beyond description but it still drove great (when the throttle servo worked). Remember, I've owned both, I'm not just regurgitating things I've read in other posts. This is my experience with these 2 bugs, same driver, same tracks and me wrenching on them on the same workbench. I got into this thing knowing it takes more wrenching but I think it will win more races. If you haven't owned a Mugen you can't understand what bulletproof tanks they are, they just don't wear like the Losi does. It sounds like I'm flaming Losi, I'm not....I just bought one for crying out loud. But anyone who thinks the fit and finish and overall quality of Losi is equal to the Mugen is just wrong. I think Losi has narrowed the gap some but there's still a difference.
Posted on: 12/5/2008 6:54 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8216417

RE: Losi 8ight 2.0 or Mugen MBX-6?
I had a chance to drive the 2.0 today and it suits my driving style better than the MBX6. I had a big long post going into the differences but my damn computer shut off and I don't feel like rewriting it. Anyway, the Losi drives better IMO but hands down the Mugen far surpasses it in quality and durability.
Posted on: 12/5/2008 2:56 AM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8214658

RE: Age and What You Rip With??
At 45 I'm on the older side of this thread, but one of the good things about getting older is having no budget. MBX6, MBX5r, XXXT MF2, B44, M11 Spektrum and of course all the chargers, lipo's, brushless motors and what not to go along with it. I Purchased an 8ight 2.0 recently just to see how it drove. And of course a hangar full of planes.
Posted on: 11/28/2008 8:28 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8192896

RE: Losi 8ight 2.0 or Mugen MBX-6?
I've got the MBX6 and the 5R before it. After watching the 2.0 8ights at my track I had to buy one, there's nothing twitchy about what I saw. The 8ight 2.0 just moved different. The new 8ight looked so good I couldn't resist, but I just bought it yesterday so probably by the end of next week I'll post back. What I can say about the 6 is it's faster than my 5 but not as forgiving by a long shot. A good driver will like what the 6 can do and the overall quality is awesome.
Posted on: 11/28/2008 1:36 AM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8190757

RE: Building the MBX-6
[quote]....you didn't assemble it properly[/quote] And this coming from someone who.......[quote]have yett to see a 6 in person[/quote] It is assembled perfectly, and it has a slight bind with the screw tightened. I don't want anyone to think I'm complaining about anything on this bug. It was a dream to build, and the quality of the buggy is just unbelievable. It handles better than my 5R did and so far it seems nearly as durable.
Posted on: 11/5/2008 8:44 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8119085

RE: Building the MBX-6
On my car if you tighten the screw on top of the left steering post it binds. I'm having the same problem as walawalastore posted. I need to look at it more closely to see if wala's method will work, haven't had a chance yet. The screw slightly loose with threadlock, no problems...no bind.
Posted on: 11/3/2008 10:14 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8113076

RE: Building the MBX-6
[quote]- The steering assembly seems to be a bit tight after assembling the whole thing, I found where the problem is. The top of the left plastic steering arm is actually touching the graphite plate on top. To cut the drag, simply shave a tiny portion from the plastic top area, I shaved away 0.3mm and sanded it again. You won't even notice. [/quote] I did encounter this. I just left the screw a little loose with some threadlock. I'll look at it again and maybe take a little off the top of the steering arm.
Posted on: 11/1/2008 1:58 AM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8103809

RE: Proline V3 tires, anybody tried them?
Finally tried the V3's. They were definitely more stable, but Bowties are the wrong tire for my track so it's hard to get an accurate read. So far I like them.
Posted on: 10/26/2008 12:28 AM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8085158

RE: Proline V3 tires, anybody tried them?
I just ordered some from Carolina RC. I got the Bowtie M3. I wonder if the V3's are legal to race?
Posted on: 10/20/2008 6:43 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8067675

Proline V3 tires, anybody tried them?
Proline has a new width tire and rim, the V3. It says they are 4.6mm wider than normal and is offered in 2 treads, the Revolver and Bowties. Anyone tried them?
Posted on: 10/20/2008 4:17 AM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8065703

RE: M11...DSS or Spektrum?
Carolina rc has the M11 DSS for $349.99 and M11 Spektrum $399.99. These prices include the radio. Aparently they discount it if you buy their DSS instead of Spektrum. E-bay had them both for cheaper.
Posted on: 10/16/2008 8:14 PM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8055573

M11...DSS or Spektrum?
I'm thinking about trying the M11. Are there any differences between the DSS and Spektrum modules? They appear to be the same except the Spektrum is $50 more.
Posted on: 10/16/2008 12:39 AM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8053281

RE: Futaba 3PM Faast glitch
[quote]I'll admit I was giving you some flack early on and I apologize. [/quote] Accepted. [quote] All I said was that the old way of wrapping receivers with rubber foam is at an end, with these newer receivers they don't require thick foam rubber anymore.[/quote] Amen, couldn't we have got to this point without telling people the don't read directions and can't follow simple instructions. Turned out there was more at play here than not enough foam. No hard feelings.
Posted on: 10/14/2008 9:42 PM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8049739

RE: Futaba 3PM Faast glitch
[quote]Conderdictions! I have been wrapping my receivers in foam for over 16 years, guess now things have changed except for updates to Futaba manuals. [/quote] I'm just trying to fix the problem with my R603FF receiver that came with my 3PM, it's the only Futaba I own. We're only talking about Fasst here. Their receivers over the last 16 years don't concern me and I never included them in my original post. "Conderdictions"? No such word in the english language. Were you going for "Contradictions"? Now for the ones of us who have issues with our Fasst receivers, lets learn from this new information and move on.
Posted on: 10/14/2008 1:49 AM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8047166

RE: Futaba 3PM Faast glitch
[quote]Never once did you mention you had an electric power model, left that out didn't you. [/quote] systemlord, can't you remember what you read 2 posts ago? [quote]No problem for a 1/8th scale with a radio box but what about 1/10th scale Losi? No radio box. [/quote] I hate it when I have to quote myself. Thanks 8605. This is some useful information you provided. I hate it when people like systemlord want to rudely blame everything on the user instead of helping get to the root of the problem. "Don't read directions", I've been reading directions for this stuff since '86. systemlord can't remember what he read 2 posts ago. One last thing, I had a RTR 8ight about 2 years ago for a short while. The receiver was mounted from the factory with..... DOUBLE STICK TAPE...... and I NEVER had a radio problem. This is a Futaba issue not user error.
Posted on: 10/13/2008 11:33 PM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8046392

RE: Futaba 3PM Faast glitch
[quote]Air Receivers | Car Receivers Tips for FASST Receivers Every R/C pilot learns by experience what methods work well for installing and maintaining radio equipment. At the same time, we also want our aircraft to have the advantage of up-to-the-minute technology...which means that every now and then, we must master some new techniques. Spread spectrum radio technology offers the perfect example. When Futaba® introduced 2.4GHz FASST radio equipment, R/C hobbyists quickly jumped to the front of electronic technology's cutting edge. Not surprisingly, those new, state-of-the-art 2.4GHz receivers have significant differences compared to old 72MHz units. So it's time to change a few old habits. Below are some recommendations for updating the way you install and maintain radio gear. Make them a part of your routine, and you'll enjoy the best performance from your 2.4GHz FASST radio gear. 1. Don't wrap your FASST receiver in foam. Protecting your receiver from vibration by wrapping it in foam used to be a "must". Not so with 2.4GHz FASST receivers. Unlike 72MHz equipment, they're not as vulnerable to vibration. Using less foam lets them operate cooler - which is a plus for all electronics. Tip: To keep the receiver cooler use small foam blocks (like standoffs) so that there is an air channel around the receiver. 2. Shade your model from sunlight when not flying. Clear canopies expose the radio compartment to direct sunlight which results in additional heat in the model interior. This causes no problems during flight, but makes shading your model on the ground very important. Cover the canopy with a white towel; or better yet, park your airplanes in the shade. This will help keep the electronic components cool. Tip: It is important to note that lighter covering colors will absorb less heat whereas darker colors will absorb more heat. 3. Mount your FASST receiver away from heat sources. We had to avoid mounting 72MHz receivers near anything that might produce RF noise. That's not as much of a concern with 2.4GHz FASST receivers - you should instead make sure that you're mounting the unit in the coolest part of the radio compartment. Stay away from the muffler exhaust, battery packs, regulators or any other heat source. We also recommend that you use the receiver's long, narrow side as its base (rather than mounting it with the bottom flat against the radio compartment floor). Secure the receiver using a Velcro® strap or gel tape. We hope that these tips help you with your 2.4GHz FASST receiver installation and maintenance. If you have any questions, please let us know. Just contact us at the Futaba Service Center, by e-mail at: service@futaba-rc.com. How to Get the Best Performance from Your 2.4GHz FASST™ Vehicle Receivers Every R/C driver learns by experience what methods work well for installing and maintaining radio equipment. At the same time, we also want our vehicles to have the advantage of up-to-the-minute technology...which means that every now and then, we must master some new techniques. Spread spectrum radio technology offers the perfect example. When Futaba® introduced 2.4GHz FASST radio equipment, R/C hobbyists quickly jumped to the front of electronic technology's cutting edge. Not surprisingly, those new, state-of-the-art 2.4GHz receivers have significant differences compared to old 75MHz and 27MHz units. So it's time to change a few old habits. Below are some recommendations for updating the way you install and maintain radio gear. Make them a part of your routine, and you'll enjoy the best performance from your 2.4GHz FASST radio gear. 1. Don't wrap your FASST receiver in foam. Protecting your receiver from vibration by wrapping it in foam used to be a "must". Not so with 2.4GHz FASST receivers. Compared to 75MHz and 27MHz equipment, they're not nearly as vulnerable to vibration. Eliminating the foam lets them operate cooler - which is a plus for all electronics. Use the method below for mounting your electronics inside your radio box. 2. Shade your vehicle from sunlight when not driving. When you're not on the track, keep your chassis out of direct sunlight. Cover it with a white towel - protect the radio box in particular. Better yet, park your vehicles in the shade. This will help keep the electronic components cool. 3. Mount your FASST receiver away from heat sources. Keep your FASST receiver away from muffler exhaust, battery packs, regulators or any other heat source. While Futaba does not recommend the use of a LiPo receiver pack with the 2.4 FASST system., if you do use a Lipo Receiver pack in your vehicle, we recommend that you mount the regulator outside of the radio box. We also recommend that you mount the receiver to the far inner wall of the radio box, opposite of the engine. Mount the receiver on its side. This allows air to flow over the top and bottom of the receiver. Secure the receiver using Velcro® or gel tape. [/quote] Now this is helpful! Thanks 8605!
Posted on: 10/13/2008 9:47 PM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8046589

RE: Futaba 3PM Faast glitch
Page 22.....3PM Manual. "Dampen the vibration to the receiver by mounting it to the chassis or mounting plate with THICK, DOUBLE SIDED TAPE IN ELECTRIC POWERED MODELS"! [quote]People these days just don't even bother to read the instruction manuals anymore, then they come here wondering why they are having problems! [/quote] I followed the instructions perfectly for my MF2 Losi.......still glitched! The instructions go on to say to wrap the receiver with foam for gas powered. I've seen the same glitch problem with the receiver wrapped. I used double layers of foam tape (giving it about 1/8th of an inch of foam ) on bottom to dampen vibration and a piece of foam on top between the lid. It's so tight in the box I don't think 1/2" foam will go around it. , this has worked perfectly for other receivers. My MF2 doesn't have near the vibration problems of a 1/8th scale and it still glitches following their mounting instructions. Explain that. I think the receiver that comes with the 3PM has a very low threshold for vibration, the problem in my electric Losi is proof of that. My buddy sent his receiver back to Futaba and they sent him a new one. We bought our radios at the same time from the same place, maybe we got a bad batch. There's numerous 4PK problems posted. Futaba is having some issues, you can't jump to conclusions and blame it all on user error.
Posted on: 10/13/2008 4:38 AM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8044031

RE: Futaba 3PM Faast glitch
[quote]Sounds like you haven't properly rapped the receiver in foam to protect it from vibration and shock. If you were to bang someones head into a wall, wouldn't they be knockout for a little bit? [/quote] I've been doing this awhile and never had a problem with any other receiver. Maybe the Futaba doesn't handle the vibration as well. I've got it mounted with 2 layers of foam tape just the same as any other receiver I've mounted. I did wrap the receiver in foam but haven't tried it yet. No problem for a 1/8th scale with a radio box but what about 1/10th scale Losi? No radio box.
Posted on: 10/12/2008 10:54 PM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8043505

RE: dx3.0 or 3pm fasst???
Might be a good move staying away from the 3PM Faast. A buddy and me both have glitch problems with ours. I'm looking for a new radio now, my 3PM locked up in the A main, I'm done.
Posted on: 10/12/2008 12:55 AM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8040865

Futaba 3PM Faast glitch
3 times in one day with 2 different receivers the car stops responding, a few seonds later starts working again. Usually followed by a bad landing etc, rattle it's cage a little and it does this. Never had a problem with any other radios, spektrum, fm etc. My buddy has the same problem but his will do it more frequently. Anyone else?
Posted on: 10/12/2008 12:45 AM by Author "KyJoe340" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8040846

RE: just got my mbx6
How are the instructions for the 6? I have the 5 and they had you jumping back and forth between two manuals. I'm thinking about getting the 6 but my 5 handles so well and is nearly indestructable, it's hard to let go of.
Posted on: 10/9/2008 12:20 AM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8032241

RE: Mugen MBX-6 Sneak Peak
I'm glad they kept the pbs. I'm thinking about turning my 5R lipo and getting the 6R for my nitro. Can't say enough good things about the 5R I hope the 6R is even better.
Posted on: 6/29/2008 9:21 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=7675909

RE: Which to Make Main Buggy?? Or Not?
I've owned both and I love how both of them handle. Which you would be faster with depends on your driving style. I'm faster with the Mugen, actually mine is a 5R not a Prospec. [quote]but as far as durability an quality goes what would you guys say?[/quote] Both are durable but the Mugen wears much slower than the 8ight. My 8ight got sloppy loose quickly and the Mugen after a season shows almost no wear. The quality of the Mugen is just awesome.
Posted on: 6/4/2008 11:44 PM by Author "KyJoe340" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=7581865