RE: Looking for cabinet on legs style flight box plans
The last two photos. My box does not have legs bacause I do not need them at my field. The box with the chain on the door is unfinished. The door will have 2 chains when finished.
Posted on: 10/27/2004 2:37 PM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2293168

RE: Looking for cabinet on legs style flight box plans
Here are some photo of the new version of my field box that I just completed. I am now started to make drawing for it. Lee
Posted on: 10/27/2004 2:32 PM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2293154

RE: Looking for cabinet on legs style flight box plans
. I will upload some photos of the new box in a couple of days. Lee Xrod I will send you the drawings
Posted on: 10/11/2004 8:58 AM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2243384

RE: Super Tiger or Tower Hobbies brand?
and you pay for shipping bothways. Lee leebelew@wt.net
Posted on: 10/10/2004 5:48 PM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=2241686

RE: Looking for cabinet on legs style flight box plans
SkyCam 41 I have most of the drawings in hand sketch form. I could probably have the complete set in a couple of weeks. Lee leebelew@wt.net
Posted on: 10/10/2004 4:30 PM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2241525

RE: Looking for cabinet on legs style flight box plans
Are you looking for something like this?
Posted on: 10/10/2004 10:52 AM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2240875

RE: Your Perfect Workshop
Hope this helps. The photo show everything. Good flying Lee
Posted on: 10/9/2004 1:49 AM by Author "Lee Belew" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=2238331

RE: No BS Batteries
Red I for one want to thank you for this information. This is probably the best info I have seen reported on battery packs that are available for purchase. I have worked with this type of things for approx. 35 years and I really do think you for your information for us flyers expecially us seniors. Thanks Lee Belew
Posted on: 9/28/2004 10:32 AM by Author "Lee Belew" in the forum "User Product Reviews"
http://www.rcuniverse.com/forum/fb.asp?m=2209073

RE: Help drilling hinge point holes?
Here is what I use as a guide for drilling the surfaces for Robart hinge point. Use a sharp drill turning backward or a piece of brass tubing to drill the holes so as not to tear the hole.
Posted on: 8/31/2004 1:36 AM by Author "Lee Belew" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=2133562

How to fix a Super Tiger 60 or 90 If you have broken out the threaded holes in the crank case.
. To fix just one side just drill and thread one hole. Hope this helpes someone. Go flying Lee
Posted on: 8/27/2004 9:29 PM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2125505

RE: What runway do you prefer?
. The runways are 50' X 600'. Go fly have fun. Lee
Posted on: 8/24/2004 1:40 AM by Author "Lee Belew" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=2112631

RE: Super Tigre 90
I have a New ST 90 that I just started for the first time today. I think all ST 90 are ringed. I have all of the documentation would you like a copy? If so email me your address and I will mail the docs to you. These are really good engines. Mine is one of the Chinese version. I am going to put it on a Stinger 60. It should really go. leebelew@wt.net Lee
Posted on: 8/21/2004 3:25 AM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=2104408

RE: How to taper the threaded end of a screw to make it easier to start.
DBCherry Dennis, for what ever reason when I taper the screws this way it leaves the threads nice and clean. Sometimes I will set down and taper a whole assortment of screws at one time. All have clean threads. Lee
Posted on: 8/13/2004 8:36 PM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2083044

How to taper the threaded end of a screw to make it easier to start.
engine mounts where the holes are not 100% aligned with the engine mount holes. Lee
Posted on: 8/13/2004 10:44 AM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2081369

RE: Those ### Control Horn Screws
and composit engine mounts where the holes are not 100% aligned with the engine mount holes. Lee
Posted on: 8/13/2004 1:33 AM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2080642

Miniature Slide Hammer
is needed. Many types of pull, push or grab devices can be made to attach to either end. Lee
Posted on: 8/4/2004 11:48 AM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2053300

RE: Club Dues?
$60.00 Per year no iniation fee. 2 asphalt runways that cross each other. 1 is 50' X 600' the crossrunway is 50' X 500' Flush men and ladies toilet. Electricity running water. Covered picnic table.
Posted on: 8/4/2004 3:01 AM by Author "Lee Belew" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=2052413

RE: Best Work Bench Top
A friend of mine is getting ready to convert one bay of his garage + 3' into a shop. For the work benches I was given by my daughter's work two 4' X 10' X 2" solid doors. One side of the doors are white and the writeable material that is used on white boards for classrooms. They are really pretty and heavy and flat. Lee
Posted on: 7/31/2004 9:22 AM by Author "Lee Belew" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=2040611

RE: Solder Clevis
Look at these comments: http://www.rcuniverse.com/forum/m_1999478/anchors_1999478/mpage_1/key_/anchor/tm.htm#1999478 Lee
Posted on: 7/26/2004 1:25 AM by Author "Lee Belew" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=2023705

RE: Ryobi 31cc engine mount
Go to www.jagengines.com Be patience their web sight is the slowest that I have ever seen. Lee
Posted on: 7/23/2004 1:47 AM by Author "Lee Belew" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=2015606

RE: Bending control rods
and they are still available today. Lee
Posted on: 7/22/2004 3:57 PM by Author "Lee Belew" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=2013989

RE: 4" Table Saw
saw is the most valuable of the 3 when it comes to RC airplanes. Have a happy time flying. Lee
Posted on: 7/19/2004 11:18 PM by Author "Lee Belew" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=2005729

RE: soldering threaded steel clevis
You will need to use an acid flux first to etch the surfaces and then they will solder. Clean the surfaces thoroughly when finished to eliminate corrosion. I bought this from Walmart about 10 yrs ago. They don't carry it any more. Don't know where to buy it. Lee
Posted on: 7/19/2004 7:23 AM by Author "Lee Belew" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=2003263

RE: Stinger 120?
Here are some comments you might like to take a look at. http://www.rcuniverse.com/forum/m_316014/anchors_316027/mpage_1/key_/anchor/tm.htm#316027 Lee
Posted on: 7/13/2004 8:57 AM by Author "Lee Belew" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=1986293

RE: Perry Pump question
The pump adjustment is backward. Clockwise to richen. Counter clockwise to lean. Lee
Posted on: 7/13/2004 3:38 AM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1985968

RE: Show us your glow drivers
Since noone is willing to comit to anything I will give everyone something to criticize. I built this one almost 30 yrs ago and used it with my starter box that had a 12 volt battery installed. It still works today.
Posted on: 7/12/2004 10:18 PM by Author "Lee Belew" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=1985133

RE: Super tigre 60 not performing!!!!
Bax Thanks for your confirmation. But I already know that. Lee
Posted on: 7/8/2004 2:21 PM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1971929

RE: Super tigre 60 not performing!!!!
BAX FYI The engine now turns 13,000 with the prop now installed. Lee
Posted on: 7/8/2004 11:45 AM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1971465

RE: Super tigre 60 not performing!!!!
Jeff You friend needs to have someone familiar with the insides of a ST 60 disassemble the engine and do a complete inspection it. I don't think it is a case of improper seal, due to a lack of break-in time, as portrayed by Lee. (I'm not sure why DarZeelon) made this statement because.... The previous owner had given up on the engine. Good flying Lee
Posted on: 7/8/2004 9:14 AM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1971078

RE: Super tigre 60 not performing!!!!
on the engine. Good flying Lee
Posted on: 7/8/2004 12:40 AM by Author "Lee Belew" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1970478