|
Covering Airframes with Vinyl???
it so I'm hoping some of you may have the scoop on this. Happy Flying! Loopman [;)]
Posted on: 7/15/2012 5:38 AM by Author "Loopman"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=11155826
GAS EQUIVALENTS TO GLOW ENGINES?
Hey Guys, I have a plane that had a ST2500 on it and I want to go to the gas equivalent of that engine. How do you determine what gas engine would replace a glow engine? The ST2500 was swinging a 20x6 JZ prop, I need to swing that same prop on a gasser and get the same thrust. Thanks Loopman [;)]
Posted on: 5/13/2012 4:04 AM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11078802
Spring Starter and Zenoah G-45 Setup?
Well, Here I go again! I've got a Zenoah G-45 and a Bennett spring starter for it. How do I set up the spring starter? Where do I position it and then where do I position the prop? Happy Flying! Loopman
Posted on: 4/18/2012 5:04 PM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11047742
RE: CRRC 40 and RCEXCL Ignition
Hey, thanks! I followed the advice on the indicated thread and the ignition checked out okay, it was the darned switch! Thanks guys! Happy Flying! Loopman [;)]
Posted on: 4/18/2012 4:56 PM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11047727
CRRC 40 and RCEXCL Ignition
Flying, Loopman [8|]
Posted on: 4/17/2012 7:01 PM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11046510
RE: Countdown to Perry!
Very Nice Video! It really legitimizes what we have been saying about the Perry show for some time. I think we (collectively) should thank Norm Deputy and the rest of the GAMA club for putting on a super show and hope next year will be even bigger! (If that's possible). Happy Flying! Loopman [;)]
Posted on: 3/5/2012 5:50 AM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10987133
RE: Countdown to Perry!
[quote]ORIGINAL: aspeed So I guess I should bring the van and a stack of $$$ next year. Sounds good. Thanx [/quote] Hey, don't bring any of those darned canadian quarters! EH! Yes definitely plan on making it next year. Happy Flying! Loopman [;)]
Posted on: 3/4/2012 11:00 AM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10986107
RE: Countdown to Perry!
, there is nothing like Perry in the Continental USA. Happy Flying! Loopman [;)]
Posted on: 3/4/2012 8:12 AM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10985968
RE: Countdown to Perry!
will be $150.00 Call me at 404-547-9859 if interested. Loopman [;)]
Posted on: 2/29/2012 1:15 PM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10981882
Mono-Kote Questions
. Happy Flying! Loopman [;)]
Posted on: 2/29/2012 2:35 AM by Author "Loopman"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10981104
RE: Regulation passed the House
From what I read in the content of the legislation we are out of the woods. Once Obama signs this it will be the absolute law by which we and the FAA must abide. The FAA cannot dictate law, it is not an autonomous arm of the federal government and just like us must abide by the dictates of this legislation. I would think that Rich and the rest of AMA need to "let sleeping dogs lie" on any points that could stir up a new hornets nest. I do not believe for a moment that AMA's position is that of Mr.Spock in "The Wrath of Khan"; "The needs of the many (the general AMA membership) outweigh the needs of the few (glider and jet jocks)". I think that the rest of us can continue to go our merry way and fly, fly, fly. Happy Flying (Live Long and Prosper) [sm=wink_smile.gif]
Posted on: 2/9/2012 9:23 AM by Author "Loopman"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10951359
RE: Countdown to Perry!
Carlgrover, I don't know but you can try getting in early. I have tables every year and I have customers before I can finish setting up! Now they may be fellow tablemates but I kinda doubt it. Happy Flying! Loopman [;)]
Posted on: 2/8/2012 3:55 PM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10950308
RE: Countdown to Perry!
There! Loopman [;)]
Posted on: 2/6/2012 4:15 AM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10946099
RE: 180 Saito
I deserve to have been re-proached in such a manner. Respectfully Loopman [:@]
Posted on: 1/21/2012 8:29 PM by Author "Loopman"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10920602
Best Way to Install Crankshaft Bearings?
Hey Guys, I am putting a CRRC 40i engine together and was wondering what the best method is of installing the crankshaft bearings? The instructions show beating them on with the spark plug wrench and a hammer (OUCH...that can't be good for the bearings or the camshaft). I also will not be using the OEM bearings and have ordered new ones from BOCA. Thanks for the advice! Happy Flying! Loopman [;)]
Posted on: 1/21/2012 8:10 PM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10909717
RE: Just received an email about video of upcoming rule info?
in this version there's no Wood Cutter to come to the rescue. Happy Flying! Loopman [X(]
Posted on: 1/21/2012 3:09 PM by Author "Loopman"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10920295
RE: Do You Prefer Wood Props or Nylon Props?
Just keep this in mind! "Wood will break, Nylon will take". Nuff Said! Happy Flying! Loopman [;)]
Posted on: 1/20/2012 7:38 AM by Author "Loopman"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10918447
RE: ESM Spitfire 72.5
! Happy Flying! Loopman [;)]
Posted on: 1/18/2012 4:49 AM by Author "Loopman"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10914855
RE: Those pesky paypal fees
Flying! Loopman [;)]
Posted on: 1/16/2012 2:36 PM by Author "Loopman"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10912073
RE: What kind of weight/lead do you use to CG balance big planes?
[quote]ORIGINAL: GerKonig [quote]ORIGINAL: Loopman What's this world coming too?! Don't use lead it's toxic, Don't eat salt, causes high blood pressure, don't eat bacon, sausage or ham, causes colon cancer....on and on and on. Well I say ''Damn the Torpedos, full... Flying! Loopman [;)] [/quote] Trvia: Ben Franklyn (local hero here) discovered early the risks
Posted on: 1/16/2012 9:44 AM by Author "Loopman"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10911625
RE: What kind of weight/lead do you use to CG balance big planes?
finger nails or up your nose! Happy Flying! Loopman [;)]
Posted on: 1/16/2012 9:02 AM by Author "Loopman"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10911563
WWI 1/4 Scale Pilot Figures - Where are they?
1/6th scale military figures but nothing in 1/4 scale,Ebay is full of those. Happy Flying! Loopman [;)]
Posted on: 1/15/2012 4:20 PM by Author "Loopman"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10910506
RE: Best Way to Install Crankshaft Bearings?
[quote]ORIGINAL: CK1 Camshaft bearings on a 2 stroke - Is this a test......... [/quote] Hey CK1, it's a COX .20 equivalent! (Just Kidding)! The CRRC 40i is a 40cc gasser! Happy Flying! Loopman [;)]
Posted on: 1/15/2012 7:58 AM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10909742
RE: Gassers-Do They Have to Be Inverted?
This is great advice. I will definitely change the ignition to an RCEXL one along with a new Hall's sensor and an adapter so I can use a CM6 plug, these are available from AGAPE RC Racing out of Virginia. Happy Flying! Loopman [:D]
Posted on: 1/15/2012 6:11 AM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10909597
Gassers-Do They Have to Be Inverted?
for an inverted install? Thanks for your opinions and suggestions. Happy Flying Loopman [;)]
Posted on: 1/14/2012 8:47 AM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10908333
Glow to Gas - How Do You Figure It?
Hope this isn't too stupid a question. I am buying a Fokker D-VII that was powered quite well with a Supertigre 3000 and I want to convert to gas. As a general rule of thumb, how do you go about determining what the best equivalent gas engine would be to replace a glow engine with? Is there a standard formula that can be used for any conversion? Thanks Loopman [;)]
Posted on: 1/8/2012 8:32 AM by Author "Loopman"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10897787
Countdown to Perry!
or looking for. Happy Flying! Loopman [:D]
Posted on: 1/5/2012 6:12 PM by Author "Loopman"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10893895
RE: Reaming a Prop
! Loopman [;)]
Posted on: 1/2/2012 5:41 AM by Author "Loopman"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10887392
RE: ESM LA-7 From VQ Warbirds
if I can get my camera working again. Happy Flying! Loopman [;)]
Posted on: 12/30/2011 7:54 AM by Author "Loopman"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10882813
RE: Commercial Drones in the News!
[quote]ORIGINAL: Red B. [quote]ORIGINAL: Loopman ... As I thought, there appears to be no conscience in the sUAV community and if you've got the bucks then you can have the technology... Flying! Loopman [:@] [/quote] The point is that some people have a conscience. Have you watched... for Greenpeace. Happy Flying! Loopman [:-]
Posted on: 12/27/2011 4:18 AM by Author "Loopman"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10877707
| 
