|
RE: ys175
[:D]ZHi where can I get one of this plug holders please Regards
Posted on: 8/25/2012 12:12 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11205216
RE: Electric Vs Engine.
and trying to fly a perfect loop regards[:D] Mavros
Posted on: 8/9/2012 1:06 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11186594
RE: XIGRIS SERVOS
Thanks Bill I am inclined to use the MK Dual elevator system......works fine in the Zeque However I am a bit concerned about CoG issiues without the 2 servos at the back regards Mavros[:D]
Posted on: 7/9/2012 3:59 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11148394
XIGRIS SERVOS
Hi all, I am currently building a ZN LINE XIGRIS and I was wondering if my choice of servos was suitable. I have never used these servos before and I would be greatful of any advice from the experts. Also any photos of servo instalation will be appreciated. I am using the following YS 170 CDI AILERONS FUTABA BLS 551 X 2 ELEVATOR FUTABA BLS 153 X 2 RUDDER FUTABA BLS 452 Thank you in advance MAVROS
Posted on: 7/7/2012 8:59 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11147118
RE: Naruke's new design - the Aiolos
[:D] Gday Adrian, Just wondering what is the capacity of your fuel tank.......and how much airborne time with YS175..... MANY THANKS regards MAVROS
Posted on: 4/26/2012 12:31 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11057159
RE: YS170 CDI SUPER MOUNT ONTO XIGRIS
Hi Thinn, Any chance of some photos of your installation....... kind regards MAVROS[:D]
Posted on: 12/11/2011 11:11 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10855278
RE: YS170 CDI SUPER MOUNT ONTO XIGRIS
Hi Papaone, Thanks for the info......where can i get one of this Alluminium mounts. Are you having any proplems with noise? What are you using for nose ring......cant make out on the photo. regards MAVROS
Posted on: 12/11/2011 7:25 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10855017
YS170 CDI SUPER MOUNT ONTO XIGRIS
Hi all, Can someone advice what the best way to mount a YS170 CDI on ZNLINE XIGRIS. I remember sometime ago seeing this alluminium bracket that simply bolted onto the Firewall with nose ring at the front ...... cant find the link now!!! Many thanks MAVROS [:D]
Posted on: 12/3/2011 9:43 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10842143
RE: Electric ZN Line Xigris C2 Build Thread
there are easier ways of achieving this... kind regards MAVROS [;)][;)][;)]
Posted on: 10/9/2011 2:52 AM by Author "MAVROS"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10755801
RE: YS70
Hi again, Just to justify my curiosity I pulled the YS apart again and Tandee is 100% correct the piston is not quite at TDC when the mark on the crank is at 6 oclck and cam at 12 oclock. Prety close but not quite.......however It does work and engine runs nicely. Maybe we should leave the TDC alone and talk about the marks instead [:D][:D] regards MANY THANKS MAVROS
Posted on: 10/7/2011 3:01 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10752640
RE: YS70
Hi Jon, You are correct ...the TDC occurs when the mark on the crankshaft is on the bottom and the mark on the cam at the top. The YS70 will not start otherwise. REGARDS AND MANY THANKS TO ALL FOR YOUR HELP.. MAVROS[:D]
Posted on: 10/4/2011 2:36 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10747635
RE: YS70
Hi tandee, This is opposite to the previous post but I will give it a go...... many thanks MAVROS [;)]
Posted on: 10/1/2011 4:03 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10744028
RE: YS70
Hi again, Not sure about your goldwing but the YS70 will not start unless the timing is spot on eventhough the engine will turn nicesely.... regards Mavros [:D]
Posted on: 9/30/2011 9:20 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10743057
RE: YS70
Hi There, I have reassembled the YS70S as per the picture but cannot get it to fire up. It spits a lot of fuel through the carby but will nt fire.......back to the work bench.....will not give up yet regards Mavros [:D]
Posted on: 9/29/2011 9:27 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10741468
RE: YS70
Thanks Nathan, Which bottom screw are you refering to...the one on crankcase ...can you draw diagram maybe many thanks regards Mavros [:D]
Posted on: 9/11/2011 7:21 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10712088
YS70
Hi all, Just wondering if anyone can show how to set the timing on YS70 after reassembly of entire engine. There is a mark on the back of the crankshaft but it doesnt line up with anyting. Many thanks Mavros
Posted on: 9/11/2011 1:03 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10711031
YS70 RING
Hi all, Just wondering if anyone knows how to replace the crankshaft ring on YS70..... Many thanks MAVROS AUSTRALIA [;)]
Posted on: 5/11/2011 12:10 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10513227
RE: Oxalys problems
Hi there Mike, I totally agree with you that its about time KYOSHO got their act together with the covering..........my OXALYS was a disgrace. The OSMOSE 70 is just as bad. I use the HYDE soft mount with YS70 without any problems. I had similar problems with YS63S .......fixed by changing O ring inside Regulator.....try it Regards MAVROS AUSTRALIA
Posted on: 2/9/2011 3:17 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10322741
HYDE MOUNT YS70
[;)] Hi all Just wanting to ask if the Hyde mount for YS70 engine is supposed to be split in the middle. The one that I have has the pink wood bit split and I can actually move the engine a fair bit on the mount. Is this NORMAL? regards MAVROS AUSTRALIA
Posted on: 11/23/2010 7:51 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10155229
RE: REGULATOR FAILURE
[:D][:D] Hi all and thanK you for your valuable advice. In case you are wonering I have opted for the EMCOTEC DPSI LINEAR REGULATOR.It features twin power supply and twin regulator with filtering and magnetic switch.. I havent as yet tried it !!! regards MAVROS AUSTRALIA
Posted on: 10/20/2010 7:07 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10080559
RE: REGULATOR FAILURE
Gday Arch, I do like the idea of dual regulator .......could you be kind enough to post some photos of your set up thank you kindly MAVROS AUSTRALIA
Posted on: 10/13/2010 6:21 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10066746
REGULATOR FAILURE
APPRECIATED THJANK U IN ADVANCE MAVROS AUSTRALIA [:D]
Posted on: 10/12/2010 9:35 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10065052
REGULATOR FAILURE
[;)] Hi all,
Posted on: 10/12/2010 9:20 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10065008
RE: Split list and classified section
[:D][:D][:D] Hi all, The point I am trying to make is that an IC engine has diferent propulsion characteristicks than an Electric.So one may suggest it is not a level playing field...... regards Mavros[:D]
Posted on: 9/8/2010 3:01 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9987785
RE: Split list and classified section
around with petrol cars now do we...that wouldnt be fair !!! kind regards MAVROS
Posted on: 9/7/2010 8:45 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9987103
RE: YS 170 DZ CDI
[:D] Gday Bob, 22% oil sounds pretty high considering that the idea of the CDI 170 was to run less oil ........ie less residue on airframe and less people inclined to change to electrics. Excuse my ignorence but I was just trying to contribute to the discusion. kind regards MAVROS AUSTRALIA
Posted on: 8/24/2010 8:07 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9957567
RE: YS 170 DZ CDI
[:D] Hi again from downunder.. Mate I would try increasing the oil content first. regards MAVROS AUSTRALIA
Posted on: 8/19/2010 10:55 PM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9946476
RE: YS 170 DZ CDI
[:D] Hi all, I am not an expert on YS engines but just wondering how much oil content are you using in these troublesome 170 cdi ? It seems to me that the high temperature you are experiencing may be the result of insuficient oil leading to an overheating and cavitation of the fuel inside the pump . May be that is why the pumps dont last..... regards MAVROS AUSTRALIA
Posted on: 8/19/2010 3:09 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9944393
RE: FUTABA BRUSHLESS SERVOS
Thanks for the advice everyone. Jarvis .....I dont think you can have a servo with no slop... regards MAVROS [:D]
Posted on: 8/5/2010 2:06 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9912132
FUTABA BRUSHLESS SERVOS
Hi everyone Just wondering if any of you have tried the FUTABA brushless servos for F3A. Which ones would you recommend for each flying control surface ? Thank you in advance MAVROS [:D]
Posted on: 8/4/2010 3:21 AM by Author "MAVROS"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9909823
| 
