RE: Critical update needed to build instructions
improve our products, from the manuals to the airplanes themselves. Mark
Posted on: 10/31/2009 9:22 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9218673

RE: Aero Works P-51?
be an option, we have not really explored it at this point but it is something we will look into. Mark Dennis Aeroworks
Posted on: 8/5/2009 11:15 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8991943

RE: Introducing the NEW Aeroworks Pitts Python ARF QB!!!
it lines up properly if you would like. Mark
Posted on: 8/2/2009 10:24 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8984934

RE: AW Extra 260 60-90 Help fixing snap roll!
will go away. Mark Dennis Aeroworks
Posted on: 8/2/2009 10:19 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8984923

RE: 100cc Edge ??
The tunnel is not made for tuned pipe. it can be extended very easily if you did want to install pipes.
Posted on: 8/2/2009 12:38 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8982817

RE: 50 cc Ultimate
Craig, We do not offer any of our airplanes as builders kits. It is nearly impossible to offer a china built ARF as a kit due to the way the kits are cut to fit in our jigs. We can offer ARC's but they are special order only. Mark
Posted on: 7/27/2009 10:11 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8967402

RE: help with 50cc yak
Yes, the full scale yaks prop is positioned away from the cowl. This will actually give you better engine performance as well.
Posted on: 7/21/2009 11:58 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8951796

RE: Looking for a plane
How well does the header fit inside of the cowl? That was my biggest concern with the Focus.
Posted on: 7/20/2009 12:39 PM by Author "Mark Dennis" in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8948860

Looking for a plane
this on a budget. Any suggestions would be greatly appreciated. Mark
Posted on: 7/20/2009 11:20 AM by Author "Mark Dennis" in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8948670

RE: 100cc Extra 300 ARF QB
We have a new video posted on our website of Jason Noll flying the 100cc Extra 300. His airplane is built stock with a new DA 100L and Greeves Tuned pipes. The performance of the airplane is very impressive. Take a look at the video here: http://www.aero-works.net/store/detail.aspx?ID=346
Posted on: 7/15/2009 10:11 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8935225

Preorder Special: 50cc & 100cc Edge!
The new 50cc and 100cc Edges are scheduled to arrive next month! For those of you still on the fence about these great new airplanes we have decided to sweeten the deal. Any preorder for the 50cc or 100cc Edge will receive free shipping. This will only apply to preorders, once the airplanes arrive this offer will expire, give us a call or order online today to get one of these great new airplanes and to save some money in the process. [link=http://www.aero-works.net/store/detail.aspx?ID=378]50cc Edge [/link] [link=http://www.aero-works.net/store/detail.aspx?ID=382]100cc Edge[/link]
Posted on: 7/15/2009 10:07 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8935215

RE: Introducing the new 100cc Edge 540!
Update: The video for the 100cc Edge is now on our website along with a new pre-order special. If you place a preorder for the 100ccc or 50cc Edge you will receive free shipping. This will save you 189.95 on the 100cc and 89.95 on the 50cc! Anyone who has placed a preorder before this offer was put into effect will still receive the free shipping. Here is a link to the new video: http://www.aero-works.net/store/detail.aspx?ID=382
Posted on: 7/15/2009 10:00 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8935194

RE: Introducing the new 100cc Edge 540!
Andrew, The stabs are beveled for 50-55 degrees of throw. We have found 45 degrees to be plenty. Mark
Posted on: 7/13/2009 4:07 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8929651

Aeroworks Wins Again at the 2009 NATS!
Jason Noll has one again at the 2009 NATS flying his 150cc Ultimate 20-300! Jason one in not only the Unlimited class but also in the Freestyle using the Ultimate there as well. Good job Jason! Lets go for 3 in a row in 2010!
Posted on: 7/6/2009 10:59 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8912196

RE: Question, AW 540 Edge vs Extra 260
Between the 2 airplanes the Edge will have a lighter wingloading and will float in a little better. The 260 is smaller so if transportation is an issue the 260 will be better. If it were me, I would go with the edge, its larger and will present better in the air. Mark
Posted on: 7/6/2009 10:54 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8912185

RE: AeroWorks Yak .60-.90
The .91FX really is the perfect 2 stroke motor for the 60-90 planes, it will require cutting the cowl for the head to clear but that is expected with most engines on this model.Let me know if you have any questions when it comes to mounting.I'm sure you will be very happy with it.
Posted on: 6/18/2009 5:10 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8862831

150cc Aeroworks Ultimate Wins Futaba XFC!
Congratulations Jason Noll For your win this weekend at the Futaba XFC. Jason was flying the new 150cc Ultimate 20-300 and did extremely well! We would also like to extend our congratulations to: Sean McMurtry 5th place Jason Danhakl 6th Place and Manual Santos 10th Place Great Job Guys! Good Luck next year.
Posted on: 6/17/2009 6:08 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8860140

RE: Pull Pull Set-up
All of our planes are set up for a parallel setup. Crossing the cables will result in the exit tubes not lining up correctly and could provided excessive slop in the cables.
Posted on: 6/9/2009 10:09 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8838028

RE: Introducing The New 50cc Edge 540 ARF-QB!
The 50cc Edge manual is now on the website! The manual can be found here: http://www.aero-works.net/store/detail.aspx?ID=378
Posted on: 6/9/2009 10:07 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8838019

RE: Introducing the new 100cc Edge 540!
The manual is now on the website, we should have the video up in the next few weeks. Here is a link to the 100cc Edge Manual http://www.aero-works.net/store/detail.aspx?ID=382
Posted on: 6/9/2009 10:05 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8838010

Introducing the new 100cc Edge 540!
Aeroworks is proud to add the New 100cc Edge 540 to their line of QUICK BUILD Series Aircraft Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible. Aeroworks has Raised the Bar The QB Series is top quality in both design and performance that will set a new standard for ARF aircraft With the Edge 540’s unbeatable stability and precision flight characteristics it is certain to please both the beginner as well as the advanced competitor Designed for both precision and 3D style flying this plane is sure to out perform all other aircraft. The Edge 540 was designed from the ground up to be a top performing aircraft. Generous control surfaces and an awesome power to weight ratio make this a plane you'll want to fly every visit to the field! SPECIFICATIONS Wing span 106 inches. Wing Area 1958 Fuse Length 96" (Spinner to Rudder) Fuse Length 93" (Cowl to Rudder) Cowl Width 12.5” Spinner Size 4” Weight 27 to 28 lbs Engine 100 cc Radio 6 Channels minimum FEATURING Strong Light Weight Construction Complete and Detailed Instruction Manual on CD Painted and Pre mounted 7075 Aluminum Landing gear Complete High Quality SAE Hardware Package Included Adjustable pushrods with centering nut Machined aluminum engine stand offs included 6061 T-6 Anodized Aluminum Wing Tube 6061 T-6 Anodized Aluminum Stab Tube Professionally covered in ULTRACOTE Pre-Hinged from factory (Ready to Fly) No gluing Two Servo Wing Large control surfaces double beveled for maximum throw Pre Mounted Fiberglass Cowl and Wheel Pants Flush fit cowl with No visible mounting bolts Molded in Cowl Baffling Pre Mounted and Tinted Canopy / Hatch assembly Canister READY! Pre installed and fuel proofed engine box Laser cut engine mounting templates provided Custom Throw Meter Included Extra Ultracote covering provided for small repairs Two Fuel tanks One for Smoke Take a look here for more pictures and to preorder the new 100cc Edge 540! http://aero-works.net/store/detail.aspx?ID=382
Posted on: 5/25/2009 6:12 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8797655

RE: 100cc Extra 300 ARF QB
[quote]ORIGINAL: MR G My aileron pushrods did not come out like the manual due to precut carbon tubing too short. I nuzzled the carbon tubing toward the center using the supplied nut. This is a depiction of my aileron pushrods. Does anyone feel this is NOT OK?? If it is NOT ok, what should I do?? MR G [/quote] MR G, Your pushrods will be fine, the pushrods really dont even need the carbon tube as they are very rigide to begin with.
Posted on: 5/18/2009 10:05 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8778568

RE: Spare parts 35% Extra 260
Zekrod, Give us a call at 303-371-4222 or email us at info@aero-works.net. We have the canopy in stock and will gladly get it out to you. Thank You, Mark
Posted on: 5/18/2009 10:02 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8778562

RE: New 35cc Extra 300 QB!!!!!!!!!
[quote]ORIGINAL: 3D er Hi Mark, Just bought the extra 35cc QB, looks great! Got a ZDZ 40 to go in it, will this be a good engine for vertical performance? Rob [/quote] Rob, The ZDZ 40 will be a great engine for the Extra! Make sure to post a few oictures when you are finished.
Posted on: 5/11/2009 10:01 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8759197

RE: 75cc Extra on Sale!
Rodney, This is not a clearance sale, just more of a customer appreciation.
Posted on: 5/6/2009 4:16 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8746031

RE: Introducing The New 50cc Edge 540 ARF-QB!
The 50cc Edge 540 is now on the website along with the new scheme and manual. The flying video will be coming soon. See the new Edge here: http://www.aero-works.net/store/detail.aspx?ID=378
Posted on: 5/4/2009 5:15 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8740323

RE: Aero Works P-51?
The 50cc P-51D is now on the website! Take a look here: http://www.aero-works.net/store/detail.aspx?ID=379 You can now pre-order directley from the page.
Posted on: 5/4/2009 5:12 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8740316

75cc Extra on Sale!
The 75cc Extra 260's are now on sale! This sale is for all colors and will run through the end of May. Take a look at the planes here: http://www.aero-works.net/store/detail.aspx?ID=298
Posted on: 5/4/2009 5:09 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8740305

RE: Aeroworks Extra 300LP build
[quote]ORIGINAL: Anders/Helene Whats the size of the spinner you are using for the 300LP? Best rgds Anders Arnesen, Norway [/quote] The 50cc uses a 4" spinner
Posted on: 4/27/2009 9:29 PM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8720807

RE: aeroworks-camodels 28% edge setup???
No problem, if you have any more questions along the way feel free to post them here.
Posted on: 4/24/2009 10:21 AM by Author "Mark Dennis" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8711277