RE: THE RETURN OF THE VIPERJET
Sorry, did not find any picture about it. Anyway is simple...just take off the rings, put some carbon fiber at the slots opened at the fuselage after removing the rings, and the rest is common sense... is not big deal at all
Posted on: 7/30/2009 4:19 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8976859

RE: THE RETURN OF THE VIPERJET
For my taste I prefere to use the full bypass on this kind of jets...Never had cooling problems and it make the jet go faster. In this thread I think you'll see pictures of the way I close mine...I made some trimming to it... Removing the inlets cowls is a good idea that also will give the model with more scale look. One thing that will help you to distribute the weight propelly for balance, is to use JR 2721 in the Ailerons and Flaps with 3/4" arms....these are light weight servos...not heavy like the 8611's. These servos locations are behind de CG...
Posted on: 7/30/2009 3:02 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8976458

RE: THE RETURN OF THE VIPERJET
Nice surprise to see this thread alive. The Viperjet is to heavy for its size...so the stall speed is higher than normal...keep that in mind, especially during turns...you have to add a few clicks of throttle before turning Speed breaks are not needed, and you'll safe weight without them. Instead, program the crow setting in your transmitter. With all the factory modifications to the last edition, it has a big tail heavy tendency, so displacing the turbine about 1" forward will help, but also will require an extension to compensate the tail pipe length. Proper installation of the hinges for the flaps is a critical issue,,,and all models I had seen build by other has this same problem. The hinge pivoting point shout be located flush with the bottom of the slots to ensure proper travel. This is very critical for the flaps in order to obtain 45 degree deflexion without over riding the servos. In addition ..at the bottom of the wing you'll have to cut about 2 mm of the trailing edges right behind the flaps to allow them full deflexion. At the end...I had to use 2 Nicads 6.0 Volts 2400 Mamps packs at the nose cone for balance. Good luck...is a fun to fly jet. Regards, MS
Posted on: 7/30/2009 11:17 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8976260

RE: Driver needed ASAP
JC...these guys will do it for free and fun...
Posted on: 6/24/2009 3:33 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8877590

RE: Why does it always happen to the good ones??
Ali, Sorry for your lost. As per pictures I have to recognize that even crashing you got style... See you, MS
Posted on: 5/11/2009 3:33 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8760085

RE: THE RETURN OF THE VIPERJET
Shaz, Sorry but I don´t have one. Good luck, MS
Posted on: 4/3/2009 3:07 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8645373

RE: Skymaster/BVM
So...following the same path of a thread I saw I few days ago....can we call this result as the VIO-MASTER???????
Posted on: 2/16/2009 6:09 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8483874

RE: Who Are You?
With my kits at the beach and at the field
Posted on: 2/15/2009 7:32 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8480487

RE: Home made fiber tank
http://www.rcuniverse.com/forum/m_132449/anchors_132449/mpage_1/key_Kevlar%252Ctank/anchor/tm.htm#132449 good luck, ms
Posted on: 2/9/2009 2:23 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8457189

RE: Need MIG 15 scheme help
Maybe this [;)]:
Posted on: 2/4/2009 7:14 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8439003

RE: Caribbean Fly-In 2009 please post pic here
[quote]ORIGINAL: mario tavarez14 thank you alejandro for posting the pictures, and thanks once again to Axel Hache , Miguel Santana and all his crew for makeing this event posible [/quote] Hi Mario, thanks for starting this thread. At the begining I was involve in the organization but due personal reasons I had to retire. Axel, Andy and Carlitos has all the merist and the results as you can see
Posted on: 1/25/2009 1:45 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8388580

RE: Caribbean Fly-In 2009 please post pic here
[quote]ORIGINAL: Ali David testing out the $hui smoke system.... Looks good so far, but side effects still need work [:'(] Warning to all you kids out there.... This is what too much good dominican food will do to you!.... anyone for more chickpeas! [:D] The expression on his face says it all! [/quote] Hey Ali,,, I thought that David was trying to recreate the Victoria's Secret Fashion Show entrance...don't you think?
Posted on: 1/22/2009 3:34 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8388548

RE: Who is ready for a Cold Weather BREAK ? www.cfi2009.com
See you guys next week. Our planes are shining waiting for all of you [8D] Later, MS
Posted on: 1/9/2009 4:26 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8339059

RE: Who is ready for a Cold Weather BREAK ? www.cfi2009.com
[quote]ORIGINAL: Edgar Perez Axel, I think there is some confusion on the hotels. The advertisement linked to the fly-in website may lead to believe that the recommeded hotel is in Punta Cana. Seems the have sevaral locations. Maybe you can clarify the specific hotel and rates. Thanks [/quote] Edgar, The hotel is EL Embajador. Axel is handling the rates with them, and will be informed shortly in the web page ++++++++++++++++++++++++++++++++++ [quote]ORIGINAL: fevifi Axel: If I decided to stay in Boca Chica.... Just to also have a beach..... How far will it be from Boca Chica to the event?????? Or is there any other Hotel, resort with a beach closer???? [/quote] Fevili, You can stay al Boca Chica, but consider that with the traffic is at 1+hours from the flying site. Uhm...there is a new road the connect the Boca Chica highway with a small town close to the field...let me check on that. ++++++++++++++++++++++++++++++++++++++ We look forward to see you all here in our sunny Winter [8D] Frankie...thanks for your support [sm=thumbup.gif]
Posted on: 11/22/2008 9:26 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8171747

RE: Jet Event January 2009 @ Dom. Rep.
[quote]ORIGINAL: fevifi Axel: Hello there... What do we need to do to sign in for the event?? For lodging and to arrive to the event... we can arrange that.. I mean for the inscriptions..?? We will be bringing 3 jets.. ( I mean....if we do not crash one before..!!) How far from punta cana resorts is the flying field located ( driving distance?) [/quote] Fevifi, Punta Cana is at 3.5 hours driving from Santo Domingo. Try landing at Las Americas Airport...only 25 minutes away. See you here, MS
Posted on: 11/16/2008 6:49 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8153937

RE: Skymaster-USA New Viper Jet paint scheme
This viperjet sure looks great...got me thinking. Post some internal views picture, landing gear, etc. Thanks, MS
Posted on: 11/15/2008 6:04 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8150828

RE: Jet Event January 2009 @ Dom. Rep.
Axel is doing an excellent job and this jet meet will be something to talk about for now on in the jet community. Don´t hesitate to come. Miguel
Posted on: 11/12/2008 3:22 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8140599

RE: Jet-Man :)
Any ideas if a RC vertion will be release? scale or sport? Pilot figure not included?
Posted on: 9/27/2008 8:14 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7995423

RE: make Rivets in fiberglas surface?
Talking about rivets...any idea of the diameter needed for a 1/6.8 scale model like a Rafale? and the distance between them?
Posted on: 9/23/2008 6:41 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7984094

RE: Rafale main exhaust vent pictures???
Hey Florent...I'm ok...having hard & good time with the Rafale at the shop...but is going great. I want to have it ready for our Jet Meet in January....You should come!! Those looks great...I already have and idea of how to reproce it. Any idea of you guys about the scales dimentions of this exhaust? I guess I can figure that out by the pictures...but if you already have that info... thanks all
Posted on: 9/19/2008 9:20 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7969591

RE: Rafale main exhaust vent pictures???
I need a close look for details...and also to determine the size....
Posted on: 9/18/2008 5:19 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7967563

RE: Rafale main exhaust vent pictures???
you got it...
Posted on: 9/18/2008 4:20 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7967397

Rafale main exhaust vent pictures???
Not sure if this is the right way to call it....Anyway if you have any picture that can help me reproduce this vent (see bellow) in my Rafale.... thanks in advance MS
Posted on: 9/18/2008 3:04 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7967180

RE: Rafale: color codes for this scheem??
I got it....thanks I already talk to my painter...
Posted on: 9/13/2008 10:54 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7949841

RE: Rafale: color codes for this scheem??
Hey Joni...this is excellent...do you have more pictures of this???
Posted on: 9/13/2008 9:46 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7949696

RE: Rafale: color codes for this scheem??
Thanks Graig....Ali's suggestion got me thinking... Hi Ali...you are right about it...I'll give it a try. BTW...I heard you're going to have a container loaded with big size jets for an event in Florida next October. I'll pm you about. Take care, MS
Posted on: 9/11/2008 9:49 AM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7942995

RE: Rafale: color codes for this scheem??
or this one:
Posted on: 9/10/2008 6:04 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7941026

Rafale: color codes for this scheem??
Guys, give me a hand having the codes for these colors... Thanks MS BTW...I'm open to other scheem options...
Posted on: 9/10/2008 5:20 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7940869

RE: Help cutting out a hatch...
I use this blades for the job....from Micro Mart...same size as a no. 11
Posted on: 9/5/2008 6:45 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7923951

RE: Don´t watch this video...
Axel is preparing a lap dance tour night...he has a local master degree in those affairs.
Posted on: 8/28/2008 3:05 PM by Author "Miguel Santana" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7895799