RE: Seniorita Incidence
Here are the setup spec for you Set Up Specifications English Metric Directions Elevator 1/2 inch 13 mm Up and Down Rudder 5/8 inch 16 mm Right and Left Center of Gravity 3 1/8 inch 79 mm Back at leading edge Dihedral 3 3/4 inch 95 mm Pre Wing Panel Incidence +1-1/2 degree wing, 0 degree stabilizer Engine Offset 6 degree down, 3-1/2 degree right
Posted on: 2/17/2010 11:39 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9512005

RE: KOVERALL BACKORDER
Gentlemen, Our shipment of Koverall arrived yesterday. It is being processed as I type this and should be ready by next week. Happy Landings Mikel@sigmfg.com
Posted on: 2/3/2010 4:39 PM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9473790

RE: SIG planes
Wow!! I am amazed at how long this thread has been around. All I can say is that we at SIG are glad you all support us. That is what keeps us in Business. Thank You All Happy landings!! Mikel@Sig mikel@sigmfg.com
Posted on: 9/19/2009 9:47 AM by Author "MikeL@Sig" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9107493

RE: Sig where are you?
Email me and I can send you a list of dealers that have the Kadet Senior ARF in stock. mikel@sigmfg.com
Posted on: 8/3/2009 10:01 AM by Author "MikeL@Sig" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8985908

RE: Where to purchase a Sig Rascal 110
There is one SIG Dealer that I know that has one. LOS LUNAS BICYCLE & HOBBY 4301-B ELAINE DR LOS LUNAS NM USA Zip:87031 Phone:505-865-4444 Email:loslunashobbyshop@hotmail.com Happy Landings
Posted on: 7/29/2009 10:02 AM by Author "MikeL@Sig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8973360

RE: Looking for a herr little extra.
Send me an email I have a list of dealers that have them in stock. Happy Landings Mike @ Sig mikel@sigmfg.com
Posted on: 7/29/2009 9:35 AM by Author "MikeL@Sig" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8973286

RE: I love SIG
I know this is an old post but I thought I would toss in a little information. The SIG and Herr build manual are now online at www.sigmfg.com. Look under the information and videos tab then on the left side of the page you will see Sig Build Manuals. Click on that and you will get a drop down menu with a list of different groups. Trainer Build Manuals, Scale Models etc. We have also posted as many of the discontinued manuals as we could find. I hope this helps. Happy Landings Mike
Posted on: 6/24/2009 10:21 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8876847

RE: sig kadet mark ll
The Instruction manuals are on the SIG website. Click on the Information and Videos tab and then the Sig Build Manuals on the left. The Mark II is under the Trainer Kit section. Happy Landings. Mikel@sigmfg.com
Posted on: 5/27/2009 5:20 PM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8803616

RE: Covering material
The SIG Aerokote is The World Models Toughlon. Airborne-Models carries it. www.airborne-models.com
Posted on: 5/18/2009 11:08 AM by Author "MikeL@Sig" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8778709

RE: looking for sig ultimate fun fly plans
You can order the plans directly from SIG. Part number SIGKP271
Posted on: 4/28/2009 1:06 PM by Author "MikeL@Sig" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8722693

RE: sig Kobra ?
Try this link http://www.sigmfg.com/BuildManuals/SIGRC53Kobra.jpg
Posted on: 4/19/2009 7:00 PM by Author "MikeL@Sig" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8696584

RE: Norvel Engines
Hi Gang, Norvel went out of business a few years ago. The only ones you will find will be old stock.
Posted on: 3/20/2009 10:44 AM by Author "MikeL@Sig" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8597224

RE: Looking 4 PDF manual 4 Sig Astro-hog
Send me an email and I will email you a copy of the manual. mikel@sigmfg.com
Posted on: 3/2/2009 10:30 AM by Author "MikeL@Sig" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8535136

RE: I love SIG
Hi Guys, We don't have our manuals available online. We do have most of them available for email in a PDF format. If you are looking for one you can email me at mikel@sigmfg.com and I will be happy to email it to you if we have it.
Posted on: 1/13/2009 10:16 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8353172

RE: Herr Engineering Star Cruiser
The plans are available directly from SIG MFG. www.sigmfg.com Part numbers HRRKP301A HRRKP301B
Posted on: 12/23/2008 9:38 AM by Author "MikeL@Sig" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8274180

RE: Sig's new Waco SRE
[quote]ORIGINAL: silver.kiwi [quote]ORIGINAL: Warbird 01 Nice thread guys. I really like the look of this plane. I have been looking at the Pacific Gee Bee Y and happen to come across this plane. My question is: is there a copy of the build manual posted online anywhere? I always like to read them to see what all comes with the kit, and what "extras" I will need to invest in. Any information would be great. Thanks! Shawn [/quote] Hi Shawn, I own both of the planes you are considering. I like them both very much as both are very high quality ARF's. The Waco has the best manual I have seen bar none. I don't think that it is available online except that SIG may list it in the parts section of their WebSite if you wish to purchase a copy. As far as extras are concerned you will need very little as SIG has provided a very nice hardware package that adds greatly to the scale looks you see here on this thread. You will want the muffler flex pipe extension if using the Saito FA100 or similar engine. A dummy radial engine and pilot is another nice addition. Standard servos work for all controls. I added wing servo covers but the new kits are supposed to include these.......check with SIG to be sure. This thread shows other nice touches that are easy to do and really add to the scale appearence of this already great looking and flying airplane. [/quote] Shoot me a PM with your email and I will email you a copy of the Build Manual.
Posted on: 12/8/2008 5:37 PM by Author "MikeL@Sig" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8225871

RE: Sig's new Waco SRE
Here is a clip of the SIG WACO SRE http://www.kavanrc.de/video/sig_waco2_e.htm
Posted on: 11/18/2008 12:21 PM by Author "MikeL@Sig" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8159284

RE: Sig Koverall Painting
Take a look at this PDF from the factory on Koverall.
Posted on: 11/5/2008 10:16 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8117498

RE: Sig 1/3 scale spacewalker
You can order the manual directly from SIG. Part number SIGIB261
Posted on: 10/22/2008 9:13 AM by Author "MikeL@Sig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8073280

RE: CG and throws for Sig SE?
Here are all of the factory specs Set Up Specifications English Metric Directions Elevator Low Rate 1 1/4 inch 32 mm Up and Down High Rate 2 inch 51 mm Up and Down Rudder Low Rate 1 7/8 inch 48 mm Right and Left High Rate 2 inch 51 mm Right and Left Ailerons Low Rate 1 inch 25 mm Up and Down High Rate 2 1/4 inch 57 mm Up and Down Center of Gravity 3 1/2 inch 89 mm From leading edge at root Dihedral 0 degrees 0 degrees Per panel Incidence + 0 degree wing, 0 degree stabilizer Engine Offset 0 degree down, 0 degree right
Posted on: 9/22/2008 9:33 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7978776

RE: Sig Lt 40 CG
Just to be on the safe side here are the factory specs for you. Set Up Specifications English Metric Directions Elevator 9/16 inch 14 mm Up and Down Rudder 1 inch 25 mm Right and Left Ailerons Up 3/8 inch 10 mm Ailerons Down 3/8 inch 10 mm Center of Gravity 4 inch 102 mm From the leading edge Dihedral 3 degrees 3 degrees Per Wing Panel Incidence + 1-1/2 degree wing, 0 degree stabilizer Engine Offset 6 degree down, 6 degree right
Posted on: 8/15/2008 9:35 AM by Author "MikeL@Sig" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=7848363

RE: SIG ULTIMATE FUN FLY 32 HELP
Here are the setup Specs Set Up Specifications English Metric Directions Elevator 3/4 inch 19 mm Up and Down Rudder 1 1/2 inch 38 mm Right and Left Ailerons Up 3/8 inch 10 mm Ailerons Down 3/8 inch 10 mm Center of Gravity 3 1/2 inch 89 mm From leading edge of top wing Dihedral 0 degrees 0 degrees Incidence + 0 degree wing, 0 degree stabilizer Engine Offset 0 degree down, 0 degree right Happy Landings Mike
Posted on: 7/28/2008 9:59 AM by Author "MikeL@Sig" in the forum "Sport Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7780058

RE: SIG Manuf. impressive customer service!
Here is a list of SIG kits that have laser cut parts in them. I may have missed one, but these each have at least some laser parts. SIGRC38 SMITH MINIPLANE SIGRC39 KAVALIER SIGRC44 FOUR-STAR 40 SIGRC55 ASTRO HOG SIGRC56 MID-STAR 40 SIGRC66 WONDER SIGRC67 KADET LT-40 SIGRC68 FAZER KIT SIGRC69 HOG BIPE SIGRC71 ULTIMATE BI-PLANE SIGRC73 FOUR-STAR 60 SIGRC74 KADET LT-25 SIGRC76 SOMETHIN EXTRA SIGRC80 RASCAL SIGRC82 ANNIVERSARY CUB 1/5 SIGRC85 SEALANE SIGRC90 1909 DEMOISELLE SIGRC91 1909 ANTOINETTE SIGRC92 1910 DEPERDUSSIN SIGRC99 DORNIER DO217 Happy Landings Mike
Posted on: 5/23/2008 10:03 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7531140

RE: SIG Aviastar .46
Hi Jeffie8696, We are glad you like your Aviastar. We were finally able to get the pice down and we also think it is a great engine. You didn't mention the price in your post. AVI46 AVIASTAR .46 2STROKE GLOW ENG EACH $49.99 Happy Landings. Mike
Posted on: 5/22/2008 7:43 PM by Author "MikeL@Sig" in the forum "Tachometer Readings"
http://www.rcuniverse.com/forum/fb.asp?m=7529029

RE: Sig Kougar CG
Hi i3dm, Here are the factory specs, Set Up Specifications English Metric Directions Elevator 3/8 inch 9.5 mm Up and Down Rudder 1 1/2 inch 38 mm Right and Left Ailerons 1/4 inch 6.4 mm Up and Down Center of Gravity 1/2 inch 13 mm Back from tip Dihedral 1 inch 25.4 mm Pre Wing Panel Incidence +0 degree wing, 0 degree stabilizer Engine Offset 0 degree down, 0 degree right Happy Landings Mike
Posted on: 4/3/2008 10:15 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7326369

RE: Sig 1/4 scale cub - full wing version
Hi black alder, Here are the factory specs for the 1/4 scale Cub. Set Up Specifications English Metric Directions Elevator 1 3/8 inch 35 mm Up and Down Rudder 1 3/4 inch 44 mm Right and Left Ailerons 1 inch 25 mm Up and Down Center of Gravity 4 3/8 inch 111 mm Back from leading edge Dihedral 1/2 inch 13 mm At W-4 rib Incidence +1 degree wing, 0 degree stabilizer Engine Offset 1-1/2 degree down, 0 degree right Happy Landings Mike
Posted on: 3/31/2008 9:56 AM by Author "MikeL@Sig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=7310312

RE: Sig Kadet MK2 CG and Throws??
Your welcome and yes I do Happy Landings Mike
Posted on: 3/27/2008 3:03 PM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7291559

RE: Sig Kadet MK2 CG and Throws??
Hi P51 fan, Here are the factory specs Set Up Specifications English Metric Directions Elevator 7/16 inch 11 mm Up and Down Rudder 7/16 inch 11 mm Right and Left Ailerons 7/16 inch 11 mm Up and Down Center of Gravity 2-5/8 - 3-1/8 inch 67 - 79 mm Back from leading edge Dihedral 2 degrees 2 degrees Pre Wing Panel Incidence +1/4 degree wing, 0 degree stabilizer Engine Offset 2-1/2 degree down, 0 degree right
Posted on: 3/26/2008 10:50 AM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7285057

RE: SIG MINI SMITH CG
Hi pa23180, Here are the factory specs. Set Up Specifications English Metric Directions Elevator 5/8 inch 16 mm Up and Down Rudder 1 inch 25 mm Right and Left Ailerons 1/2 inch 13 mm Up and Down Center of Gravity 1/4 inch 6 mm Back from LE on Bottom Wing Dihedral 5/8 inch 16 mm On Each Panel Incidence +0 degree wing, 0 degree stabilizer Engine Offset 0 degree down, 0 degree right
Posted on: 3/24/2008 12:11 PM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7274434

RE: Sig Fazer CG?
Hi rcdude, Here are the factory specs. Set Up Specifications English Metric Directions Elevator 3/4 inch 19 mm Up and Down High rate 1 1/2 inch 38 mm Up and Down Rudder 1 1/2 inch 38 mm Right and Left High rate 1 7/8 inch 48 mm Ailerons 1 inch 25 mm Up and Down High rate 2 inch 51 mm Up and Down Center of Gravity 5 1/8 inch 130 mm From the leading edge Dihedral 0 degrees 0 degrees Incidence + 0 degree wing, 0 degree stabilizer Engine Offset 0 degree down, 0 degree right
Posted on: 3/24/2008 12:10 PM by Author "MikeL@Sig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=7274430