RE: WALKERA 37
Mark, I adjusted V1/V2 as you stated and wow, a lot more stable. [:)] Now I just need to adjust the heli from going to the left or foward. I was able to get it off the ground about 6 inches but not at a stable hover. This is a good start. Still no crashes. I had about 5 minutes to play with it before the battery died. When I can get it to a stable hover about 2 feet, then I might venture outside. Upgrades need to come first. I did have the heli start the yaw thing again only to find a screw had fallen off and I had no rudder control. opps.[&:] Found the screw and back to normal. Thanks, Mike
Posted on: 7/10/2006 12:52 AM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4482808

RE: WALKERA 37
My new parts are not here yet but I am still plating with the stock setup. The problem I have now is the heli turn counter-clockwise and I have been unable to adjust even at 12"-18" up in the air. Any suggestions? The heli can not take too many more drops from that height without something breaking or it running into something. I am flying in the garage and so far have not hit anything. Mike
Posted on: 7/9/2006 3:08 PM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4480716

RE: WALKERA 37
Today I ordered a Lipo 1800, Lipo Charger, Align 430L Brushless Motor, Align 25A ESC and Align Metal tail Servo Brackets for my DF37. I should have them sometime next week. I can't wait. Army, What part number did you order for the DF36 tail servo control rod? Once I move the servo to the tail I would like to use the shorter DF36 control rod. I adjusted the length on the tail servo rod today to try and stop the heli from turning left. But once I move the servo I have to re-adjust. I will update once I get all the parts. Thanks, Mike
Posted on: 7/7/2006 12:25 AM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4472160

RE: WALKERA 37
I want to purchase the 11.1v 1800 maH 3-cell lipo. What discharge rate should I buy 10C or 12C? I will also need to buy the proper charger for the lipo. Does anyone have an on-line reseller they like to puchase from or an eBay seller? I would like to buy the battery and charger from the same place. Thanks, Mike
Posted on: 7/5/2006 1:14 AM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4464178

RE: WALKERA 37
Heliwannabe, Mine did come with the 400 motor and the green 12v 650 mAH battery. I will be investing in a 1800 lipo when I get an ammo holder to charge and store the battery. After seeing the videos from Utah Flyer's I am going to be cautious with the lipo. Don't want one to catch fire and burn down the house. I know they went overboard with the charging demonstration, but better to be cautious than sorry. I have adjusted the main blades but not sure if they are too high now. I had to adjust by two turns to lengthen the control on the blue blade. Maybe I need to buy the pitch guide. Happy 4th to all, Mike
Posted on: 7/4/2006 11:32 PM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4463945

RE: WALKERA 37
Thanks Army, I will work on the adjustment over the next couple of days. I only get about five min. with the stock battery. I will provide an update when I am done. Thanks again, Mike
Posted on: 7/4/2006 1:49 PM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4462084

RE: WALKERA 37
I just received my DF37 and need to adjust the main blades. The instructions say to adjust the control linkage. Now for the dumb question. Which one is the control linkage? How do you properly adjust the main blades? I am new to this hobby and not sure which linkage does what. I would like to do some upgrades, Brushless motor, tail servo, lip etc. Is it easy to install a new motor and electronics? Will it have the same safety start button? Any help would be great. Thanks in advance, Mike
Posted on: 7/4/2006 2:42 AM by Author "MikeU" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4460796