|
RE: Official Losi Micro SCT Thread
[quote]ORIGINAL: thehuntingterminator All my fellow Micro SCT owners come talk about these little but amazing trucks. Here's mine right now. Mostly bone stock, in fact, completely stock! So what's your Micro SCT like? [/quote]hi... is fun?
Posted on: 2/14/2012 8:39 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10959475
RE: OFFICIAL MINI E-REVO THREAD!!!
people say the best is the hitec 25mg... wil see...
Posted on: 2/14/2012 8:24 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10959454
RE: OFFICIAL MINI E-REVO THREAD!!!
[quote]ORIGINAL: J0EC00L Mpower, You're gonna want a hitec metal gear servo. Yes there is a direct fit. Ask skora or GForce, I know one of them ran theirs with one. I had one in mine, just can't remember the model. I think it ended in a 25?? Just make sure to get the metal gear servo, high torque! Night and day compared to the traxxas. Just know that I think only a handful of hitec servos are waterproof... I could be wrong though, as I haven't done my research of recent, so double check to be sure. Also. When it comes to upgrading your esc - the sidewinder by castle is perfect. You could put a mamba max pro. But it's pretty much overkill for the mini e Revo. Stick to a 1/10 esc! Unless............ You install the tenbol motor mount and go with a 1/8 size motor. Then you'll want the mamba max pro! But at that point, your pretty much asking to break everything on your merv. Joe [/quote] thanks for the advice but the stock vxl is very fine for me. you didn;t have to modified nothing to fit? somebody can tell me the excact model please. thanks
Posted on: 2/14/2012 9:28 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10958574
RE: OFFICIAL MINI E-REVO THREAD!!!
[quote]ORIGINAL: TheKennyKiller [quote]ORIGINAL: Mpower25 [quote]ORIGINAL: gforce2448 Very cool! The center diff will improve handling but will pretty much eliminate any wheelies. I installed one in my Merv for that purpose. I run it mainly at the track and wanted to keep all four wheels on the ground. It does improve cornering quite a bit. I also like that I can change the angle of the truck
Posted on: 2/13/2012 9:47 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10958002
RE: OFFICIAL MINI E-REVO THREAD!!!
[quote]ORIGINAL: gforce2448 Very cool! The center diff will improve handling but will pretty much eliminate any wheelies. I installed one in my Merv for that purpose. I run it mainly at the track and wanted to keep all four wheels on the ground. It does improve cornering quite a bit. I also like that I can change the angle of the truck while in the air when jumping, just by tapping the brake or throttle. This makes it easy to land jumps very smoothly or do front flips if you desire. Good luck and hope you enjoy your Mini Revo. [/quote] thanks for the quick response. about the low voltage cut off, do you know how to do it? how do i know is set correctly? thanks
Posted on: 2/8/2012 6:50 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10950592
RE: my revo
looks good. quetion... do you know where can i get the rear high body post to fit the proline body?
Posted on: 2/7/2012 9:43 PM by Author "Mpower25"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10949158
RE: OFFICIAL MINI E-REVO THREAD!!!
Hi. I just bought second hand mini e-revo 1/16 Is very fun truck but it need a little bit of work... I replace the front knukcles because had a lot of slop (big flip ) now in the rear i think because is worn has a lot slop and the car a full throotle is going everywhere. so now i ordered Traxxas 7148 GTR Shock Spring(2) 2.22, 1/16 MINI E-REVO TRA7148 Traxxas 7147 GTR Shock Spring(2) 2.06, 1/16 MINI E-REVO TRA7147 Traxxas 3064 Parallel Wire Harness, Mini 1/16 Rally Racer, Revo, Slash TRA3064 Traxxas 7184 Adjustable Wheelie Bar, Mini 1/16 Rally Racer, Revo, Slash TRA7184 ProLine 3360-00 Clear F-150 SVT Raptor Body, 1/16 Mini Revo PRO336000 RPM Front Bumper Red 73989, 1/16 MINI REVO RPM73989 RPM Knuckles - Axle Carriers (2) 73165, Mini 1/16 Rally Racer, Revo, Slash RPM73165 RPM 80455, Tubular Front Bumper Blue, REVO 3.3 RPM80455 ProLine 6005-02, Premium Blend CA Tire Glue Medium PRO600502 Traxxas Complete Center Diff 7014, Mini 1/16 Rally Racer, Revo, Slash TRA7014 Team Losi LOSA5286, Silicone Diff Fluid 50000CS LOSA5286 I hope with the center diff the handling increase, and also the wheelies :S
Posted on: 2/7/2012 9:09 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10949112
RE: Upgrade Volcano S30 Engine
[quote]ORIGINAL: Kristoffer_E That .28 is just nuts!!! With the right gearing, you could get MASSIVE bottom-end; it's already crazy enough! When you say "convert the rotary carb to slide carb," do you mean just buy a different carburator, or actually modify the stock one? Also, I wonder if the SH .28 would bolt up just the same as the Axial, because I've had great luck with my SH .18, and I can get the .28 for ~$90 with Redcat's engine replacement program. As for the pipe, what would happen if I used the stock tuned pipe on my truck, and just bought a header that will fit the new engine? Would the pipe (designed for my SH .18) not be of the proper size/shape for a larger engine? [/quote]the same carb you modifed the linkage to work on the servo. about the fit with the SH i don't know but for the same price you get brand new axial .28. the pipe savage x 4.6 is very cheap.
Posted on: 1/18/2012 7:31 PM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10916204
RE: Upgrade Volcano S30 Engine
[quote]ORIGINAL: nitrosportsandrunner [quote]ORIGINAL: Mpower25 Hi... mi brother put the o.s tz .18 in the redcat tornado s30 and never screw up a spur gear or something, verryyyyyyyyy fast! in my shockwave (pretty much the same chassis) I put the big block axial .28 engine. you need to buy a adjustable engine mounts http://www.youtube.com/watch?v=sKB0N_5g_Xw&list=UUZAX3oP0ghCAu82II8ceHyg&
Posted on: 1/18/2012 2:54 PM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10915674
RE: Turnigy 1/16 buggy unboxing review
hi... loooks nice that buggy, so is the same chassi of the mini inferno 1/16 scale right? good speed? for 68 dollars looks cool.
Posted on: 1/18/2012 11:01 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10915322
RE: Upgrade Volcano S30 Engine
Hi... mi brother put the o.s tz .18 in the redcat tornado s30 and never screw up a spur gear or something, verryyyyyyyyy fast! in my shockwave (pretty much the same chassis) I put the big block axial .28 engine. you need to buy a adjustable engine mounts http://www.youtube.com/watch?v=sKB0N_5g_Xw&list=UUZAX3oP0ghCAu82II8ceHyg&index=4&feature=plcp
Posted on: 1/18/2012 10:56 AM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10915309
RE: The mini everyone has always wanted, losi 1/14th 8ight
Hi guys where can i find the best price for this losi? thanks
Posted on: 12/23/2011 4:57 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10873647
RE: Redcat Racing Volcano Thread
[quote]ORIGINAL: hudsonaj36 Hi, have been searching for an answer but can not find it. My rear dogbones on my old Himoto Eldorada/Volcano bottom out in the cups before my suspension does. So it seems like my dogbones are to long. They measure about 90mm in length. Any shorter dogbones available? Are the newer Volcano dogbones longer than older Himoto's? Also I know about the fuel tubing trick and that is not the problem. Thanks [/quote]mmm is like 87mm volcano s30. search on the redcatracing web pag, in the manual and then write down in ebay.
Posted on: 12/7/2011 12:10 PM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10848288
RE: MGT 8.0 ADVICE
what about the consume ? compare 4.6 engine etc?
Posted on: 12/6/2011 3:26 PM by Author "Mpower25"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=10846702
RE: Is this a good deal on a HPI Savage 25?
[quote]ORIGINAL: 209mark123 I have had my savage x 4.6 for well over a year now. They can withstand a beating and that goes for jumping mudding and even high speed crashes. I had a redcat racing earthquake 3.0 I barely got 2 full tanks in and I gave up on it cause everything kept breaking, bought a savage and never looked back. I have had to replace some small things along the way but overall out of my cars and all my friends cars it is the toughest. [/quote]mmm i have the same problem in my volcano s30 redcat, dog bones, shaft, wheels, etc etc i want to jump to the savage x 4.6. where is the best price to get one?
Posted on: 12/6/2011 3:19 PM by Author "Mpower25"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10846692
RE: help with new wheels and tires.
hi i put the traxxas stampede, like 36 plus ship on ebay
Posted on: 12/6/2011 6:42 AM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10845813
RE: Redcat pics..trucks and buggies
My brother tornado s30 o.s .18 tz jato shocks baja wheels traxxas servo etc
Posted on: 12/6/2011 6:31 AM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10845798
RE: Redcat pics..trucks and buggies
nice redcats!
Posted on: 12/6/2011 6:29 AM by Author "Mpower25"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10845795
RE: RC18T2 RTR battery lipo upgrade
[quote]ORIGINAL: SyCo_VeNoM [quote]ORIGINAL: The_Shark [quote]ORIGINAL: Mpower25 A friend gave me this charger do you think will work? [/quote] thats pretty ghetto bub. go to hobby partz and get one there for like $40. just make sure it comes with a power adapter. [/quote] told him that in a PM lol I'll be honest I wouldn't use that battery connector seeing it will have to solder
Posted on: 11/30/2011 7:19 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10837304
RE: ***Official*** 1/18 Scale HIGH SPEED Thread!!!
[quote]ORIGINAL: jermpool I have a venom pro charger [/quote]looks good but is to much money... what about dinamite?
Posted on: 11/30/2011 12:39 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10836630
RE: RC18T2 RTR battery lipo upgrade
this is what i need ? http://www.ebay.com/itm/Losi-LOSB1205-Battery-Connector-Wires-RC18-RC18B-RC18T-/290629165785?pt=Radio_Control_Parts_Accessories&hash=item43aad922d9
Posted on: 11/30/2011 11:56 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10836549
RE: RC18T2 RTR battery lipo upgrade
A friend gave me this charger do you think will work?
Posted on: 11/30/2011 11:38 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10836522
RE: RC18T2 RTR battery lipo upgrade
[quote]ORIGINAL: SyCo_VeNoM the chargers under $30 generally all need a external 12V 6A+(I'd say at least 10 to be safe) power supply which can jack up the cost quite fast to one that has the power supply built in. I own 2 of the turnigy power supplies (I use a server power supply to power mine) because it with the power supply it was cheaper than the cost of a multi battery charger. Also if you order from Hobbyking make sure you pick one that says USA on it or you will pay exorbitant shipping costs to get it in a relatively moderate time, or wait over a month for it to come on the slow boat from china with the cheaper shipping. Versus the $6 shipping (on my last order from them) that I received in 3 days(my last order from china for comparison shipping was $45 for the same delivery time). As for the battery yes you will need a different connector. Also you should get a Lipo low voltage alarm off ebay for $4 or so that plugs into the balance port on the lipo, and monitors the cells and tells you when to stop driving so you do not damage the battery. That is unless you have a brushless setup that has a low voltage cutoff. [/quote]thanks for the help. I finaly bougth the ZIPPY Flightmax 2200mAh. I just need a better run time because stock only 12 min :S didnt cactch you about the charger... sorry newbie jaja. about the alarm i have to plug in the battery rigth? thanks
Posted on: 11/30/2011 11:36 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10836518
RE: ***Official*** 1/18 Scale HIGH SPEED Thread!!!
[quote]ORIGINAL: yakfish Where did the truck go? all I see is battery! [/quote] nice proyects! I just got mi new rc18t2 and is very nice but the run time is about 12 min. I ordered a ZIPPY Flightmax 2200mAh and i am a newbie ahah i need a lipo charger rigth? any ideas? thanks
Posted on: 11/30/2011 11:27 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10836505
RE: RC18T2 RTR battery lipo upgrade
also about a good lipo charger is good? I found to many... http://www.hobbyking.com/hobbyking/store/__216__408__Battery_Chargers_Acc_-Battery_Chargers.html thanks
Posted on: 11/30/2011 9:49 AM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10836316
RE: RC18T2 RTR battery lipo upgrade
another pic
Posted on: 11/29/2011 7:50 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10835562
RC18T2 RTR battery lipo upgrade
Hi... I just bougth my first electric rc so i am very happy...but i have some question i order to have better run time i found this lipo battery http://www.hobbypartz.com/77p-sl1800-2s1p-30c-2222.html what do you think about it? do i have to adapt the connection ? thanks
Posted on: 11/29/2011 7:41 PM by Author "Mpower25"
in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10835541
RE: Crankshaft front bearing leak.
[quote]ORIGINAL: 1QwkSport2.5r [quote]ORIGINAL: Mpower25 [quote]ORIGINAL: chris6414 I have seen new bearing leak WD40 but don't run lean. Rich tune like sloppy running? or nice and smooth but you think it is rich. Try richening the LS a 1/4 tunr and measure again. After warm up it should rise to the 250 range at idle and stay there or start to go down after 20 seconds or more. [/quote]i don
Posted on: 11/5/2011 8:39 PM by Author "Mpower25"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10798724
RE: official hotbodies lsp thread
[IMG]http://i43.tinypic.com/2nixnb8.jpg[/IMG] [IMG]http://i40.tinypic.com/68fpqx.jpg[/IMG] [IMG]http://i44.tinypic.com/28gz8fd.jpg[/IMG] [IMG]http://i43.tinypic.com/21j4zf8.jpg[/IMG] i have to cleaned up. where can i find the receiver battery? 6v i think... somebody know the LSP is the same trohpy 4.6? thnks
Posted on: 10/29/2011 6:12 PM by Author "Mpower25"
in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=10788664
RE: official hotbodies lsp thread
i bought a used lsp i am going to upload some pics
Posted on: 10/29/2011 6:03 PM by Author "Mpower25"
in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=10788656
| 
