|
RE: ** WALKERA DRAGONFLY 36 *
Thanks [color=#660000][b]ReyTek[/b][/color] I'll give that a go Cheers m8.... Catch ya all laters Take care [color=#00FF00][u][b]Noz - (Matt)[/b][/u][/color]
Posted on: 6/7/2006 5:22 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4364771
RE: ** WALKERA DRAGONFLY 36 *
[b][font="Verdana"]Hello chaps[/font][/b] sorry iv been away so long, I hate busy lives lol Well anyways i come back to you with good weather for flying and another problem. I cant remember if iv posted this b4, but I still have the problem of the heli spinning out of control when i lift off. I think its the tightness of the tail blade belt, i think the tail boom pole has slipped towards the body slightly which has made the belt slack so as soon as i power up the tail belt slipps and can no longer compensate for the main rotor spin. I think i have to pull the tail boom pole back towards the tail to tighten it again......i think!! If any of u guys or gals have had the same prob and resolved it, PLEASE!!! post....hehe Im desperate to get flying again. =(( Im glad to be back all and am also glad that this post is going so well. nice to see ya all again, Regards [color=#990000]NRCH (Matt)[/color]
Posted on: 6/5/2006 7:17 AM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4354626
MOVED: ** WALKERA DRAGONFLY 36 *
Walkera Helis - Dragonfly, etc..: http://www.rcuniverse.com/forum/fb.asp?m=3400347
Posted on: 12/17/2005 6:26 PM by Author "NOZZARCHELI"
in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3677868
RE: ** WALKERA DRAGONFLY 36 *
.........is it the pin that holds the belt cog on......thanks guys, NOZZARCHELI (UK) MATT
Posted on: 10/27/2005 4:27 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3495773
RE: ** WALKERA DRAGONFLY 36 *
YO GUYS, I still have a problem........this heli is great but i have the problem with my tail still.......details are on a previous page of this thread........basically the tail spins around when i lift off even slightly........any suggestions...cheers MATT (UK)
Posted on: 10/27/2005 3:59 AM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3494296
RE: ** WALKERA DRAGONFLY 36 *
YOYO....sorry im not on topic guys but................just wonna say im back........beenaway for a couple of days so sorry for not answering any questions.....im sure you've all helped each other......im just gonna go and read all the stuff i've missed.....thanks MATT (UK)
Posted on: 10/23/2005 7:12 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3483156
RE: ** WALKERA DRAGONFLY 36 *
Yo guys, i think iv sorted my tail problem................i was powering up and the heli would fun fine......and just as i lifted off the tail just span around to the right ................My tail belt was loose.......with help from the other guys i fixed it and now it runs great again......yo borisboy, i'd check your tail belt tension, also put the servo arm on in the correct place....unscrew the servo arm and pop it off, then move the tail rotor to the position you want (center) by pushint the metal rod, then re-connect the servo arm, the servo arm will clip on in different places as there is a small gear inside so just play about with this until the servo gives the right tail pitch each way.....thanks guys and hope this helps MATT (UK)
Posted on: 10/19/2005 6:51 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3471002
RE: ** WALKERA DRAGONFLY 36 *
Thanks ewr101, i will try that when i get home tonight............cheers for the info m8...... MATT (UK)
Posted on: 10/19/2005 3:31 AM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3469066
RE: ** WALKERA DRAGONFLY 36 *
No probs borisboy...............
Posted on: 10/18/2005 7:48 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3468040
RE: ** WALKERA DRAGONFLY 36 *
Thanks thecheatscalc, i'll give it a go.........cheers again guys. MATT(UK) EDITED ::::: YO Guys.....i have checked all the gears and they are all fine.......i think my tail belt is loose......how do i tighten it....................i don't have the slightest..........please help.....really annoying....thanks MATT(UK)
Posted on: 10/18/2005 12:28 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3466737
RE: ** WALKERA DRAGONFLY 36 *
Hi Gary..........what happens is, the heli starts up normally...........rotors get to a good rpm and the tail rotor compensates like normal......as soon as i lift off the tail starts spinning to the ringt and i have no way to control it.....tried the trim,ajusting the servo and the gyro...........mabe i did something wromg here.......please help......thanks MATT(UK) Im off to bed now guys....1:02am here in the uk..............
Posted on: 10/17/2005 7:56 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3464565
RE: ** WALKERA DRAGONFLY 36 *
yo guys............i have a small problem.......my heli power up fine and then when it lifts off it goes into a uncontrollable spin....i thought it might have been the gyro,i ajusted it and it had no effect.....and i also ajusted the tail servo arm..........the servo moves the same distance both ways now........i don'tknow what it is..............the heli is fine until it lifts off............any help please.......thanks... MATT(UK)
Posted on: 10/17/2005 7:10 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3464432
RE: ** WALKERA DRAGONFLY 36 *
Just charge it until the light turns green on the charger............about 1 1/2 hours really.......hope this helps. MATT (UK)
Posted on: 10/17/2005 6:56 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3464381
RE: ** WALKERA DRAGONFLY 36 *
Thanks for the info Tiger27....all sorted now.............................cool pics in your gallery Xcell123, thanks again for the info, Cheers M[b]ATT (UK)[/b]
Posted on: 10/17/2005 11:43 AM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3463117
RE: ** WALKERA DRAGONFLY 36 *
No Probs Xcell123, i will send some more of my DF36 and DF4 photo's to your e-mail address, have you looked at the video of my second 36 flight.......on page 2 i think.......if you cannot view it i will send that to you also.......if anybody else wants some photo's just post your asddress and i will try to send some.........QUESTION ----- How do you ajust the thee servo's........i have replaced the yellow tail servo and attached a new high preformance one.....no more twitching.....the problem i have is that i cannot ajust the servo far enough using the trim on the TX.....i have looked at the servo and thre is nothing there where i can change the postiion of the servo arm.....what do i do????.....do i just unscrew the servo arm and place the arm on the cog in a different postion, if not please help!!..........Thanks Chaps. MATT (UK)
Posted on: 10/17/2005 5:52 AM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3462408
RE: ** WALKERA DRAGONFLY 36 *
Yo thecheatscalc, didn't mean to offend you in ny way about the servo screws.....infact i have taken mine off now and it has saved me some servo's........the only one i don't take off is the rudder servo as it is inverted. thanks for the info on the pinions, although my align fit my heli as soon as i got it......mabe the guy i bought if from put on pinion that would fit the 36 because i asked him if the motor would fit before i bought it.....................thanks for the info guys CHEERS Matt (UK)
Posted on: 10/15/2005 4:49 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3458214
RE: ** WALKERA DRAGONFLY 36 *
HI, I haven't taken my screws out, just don't want to risk the servo arm popping off...........Thanks guys MATT
Posted on: 10/14/2005 5:09 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3455717
RE: ** WALKERA DRAGONFLY 36 *
[b]Thanks Ron[/b], I have just purchased the same servo, it's in the uk though so i should receive within a couple of days......hope it's better than the stock....Thanks, http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6005037797&fromMakeTrack=true [b]MATT[/b]
Posted on: 10/13/2005 6:51 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3452784
RE: ** WALKERA DRAGONFLY 36 *
yoyo......i will be the stock motor.......just wait for your li-po and brushless setup and you'll see the change....also setup the PZT/PLT settnigs the same as above........this should solve that......im gonna wait and see if i can get another free walk servo frommy supplier.....thanks MATT.
Posted on: 10/13/2005 3:42 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3452224
RE: ** WALKERA DRAGONFLY 36 *
YO borisboy, Im looking at this tail motor at the moment, i think im gonna upgrade the rest of them slowly as the rest of them work fine at the moment, if you have any links on servo's that will fit in the 36 please post tham.... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6005266208&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1 Thanks MATT.
Posted on: 10/13/2005 2:11 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3451930
RE: ** WALKERA DRAGONFLY 36 *
[b]SOZ to double post...........I KNOW IT'S A BIT OFF TOPIC BUT [/b] , I just put my stock motor from my 36 in my FP DF4 it was just in the bag whitch had all my extras in when i got my 36.....well i put it in my DF4 and it actually works......hovers well, loads of power, flight time is only very slightly shorter, BUT for the preformance i don't really care.....cool eh Thanks, MATT
Posted on: 10/12/2005 7:45 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3449305
RE: Walkera Dragonfly #36
I KNOW IT'S A BIT OFF TOPIC BUT , I just put my stock motor from my 36 in my FP DF4 it was just in the bag whitch had all my extras in when i got my 36.....well i put it in my DF4 and it actually works......hovers well, loads of power, flight time is only very slightly shorter, BUT for the preformance i don't really care.....cool eh Thanks, MATT
Posted on: 10/12/2005 7:43 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3449301
RE: Walkera Dragonfly #36
[u][b]SORRY TO NAG!!! [/b] [/u] !HI Guys......I think my 36 tail servo is broken.....I know WALKERA electonics are shocking.......but hey.......i turn the tx and the heli on and the servo works fine, then when i takeoff a couple of seconds into the flight the tail servo locks up and the heli goes into a wild spin.....when i power down the servo just chatters and doesn't respond to any input......thing is, when i unplug the battery and then plug it in again the servo works again...i don't know if my gyro is affecting the servo in some way, but this is really annoying....any tips would be apreciated........thanks MATT. I may just get a full set of new servo's......that'll cure my problem...
Posted on: 10/12/2005 6:06 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3449023
RE: ** WALKERA DRAGONFLY 36 *
[b]Yo Guys,[/b] seems like we are all in the same neck of the woods with the tail servo, I have messed around with the gyro settings but the tail servo still keeps locking on one side after i get off the ground like borisboy's, when i got the heli the servo was fine and im guessing the sticking of this servo was the reason for my crash, i think i will purchase some more servo's for this heli as i think this will improve the preformance tonns.........still if anybody has some tips on how to fix this it would be greatly apreciated...Cheers BORISBOY : For your power situation, just get a brushless setup with a li-po that'll sort that out....you already have the li-po don't you? MATT. I have contacted the seller and i think he is going to send me a new servo...HOPEFULLY....thanks again
Posted on: 10/12/2005 5:59 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3449000
RE: ** WALKERA DRAGONFLY 36 *
HI Guys......I think my 36 tail servo is broken.....I know WALKERA electonics are shocking.......but hey.......i turn the tx and the heli on and the servo works fine, then when i takeoff a couple of seconds into the flight the tail servo locks up and the heli goes into a wild spin.....when i power down the servo just chatters and doesn't respond to any input......thing is, when i unplug the battery and then plug it in again the servo works again...i don't know if my gyro is affecting the servo in some way, but this is really annoying....any tips would be apreciated........thanks MATT. I may just get a full set of new servo's......that'll cure my problem... Im looking at this for my tail......something in the uk would be nice though....faster shipping http://cgi.ebay.co.uk/RC-Helicopter-zoom-shogun-3dx-400-trex-TowePro-4-servo_W0QQitemZ6005266208QQcategoryZ2563QQssPageNameZWD2VQQrdZ1QQcmdZViewItem
Posted on: 10/12/2005 1:32 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3448384
RE: Walkera Dragonfly #36
HI Guys......I think my 36 tail servo is broken.....I know WALKERA electonics are shocking.......but hey.......i turn the tx and the heli on and the servo works fine, then when i takeoff a couple of seconds into the flight the tail servo locks up and the heli goes into a wild spin.....when i power down the servo just chatters and doesn't respond to any input......thing is, when i unplug the battery and then plug it in again the servo works again...i don't know if my gyro is affecting the servo in some way, but this is really annoying....any tips would be apreciated........thanks MATT. I may just get a full set of new servo's......that'll cure my problem...
Posted on: 10/12/2005 1:28 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3448377
RE: ** WALKERA DRAGONFLY 36 *
Hi Guys, Right, the PZT and PLT knobs....The PLT knob changes the throttle and rpm of your motor,you have to ajust this to the pitch of your blades as higher pitch needs a highter rpm, just ajust it until you get the desired effect. The PZT changes the pitch of your main blades, if you increase the pitch(right turn) the heli will generate more lift, it is important that you don't pitch your blades too far as this will put un-needed strain on your motor aswell as having little affect to the preformance.... hope this helps. My settings are shown on the pic above... Thanks guys, Matt. (NOZZA) that's the nickname, well that's what everyone calls me anyway!! Thanks again...
Posted on: 10/11/2005 7:16 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3445918
RE: Walkera #4 Fixed Pitch Helicopter Forum
HI, i have a DF4 and 36, i have recently been having problems wth the power of my DF4ch, i have a new nimh battery and i have even installed a new motor and it has no effect......i have installed heatsinks all round and balanced blades, im taking off and the heli doesn't have enough power to get much higher than about 1ft.................... im guessing it may be the receiver/speed controller.....or not......if anybody knows what could be wrong...PLEASE HELP......i wonna fly this thing again.......even though i have an upgraded 36 that works...............this little thing rocks!! ANY HELP WILL BE MUCH APPRECIATED !! Thanks, MATT.
Posted on: 10/11/2005 4:19 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3445405
RE: ** WALKERA DRAGONFLY 36 *
[b]Hi borisboy,[/b] The picture below shows the PLT and PZT setting that i use for my heli......i don't know if the settings vary for each heli but these setting give me the right pitch and throttle so i can takeoff smoothly and either have a stable hover or do some simpl aerobatics, and with exess power if i want it. (Make sure the no:8 switch is on "unlock" before you do this and then switch it back after ajustments are made. Try putting that align brushless in, you'll be suprised at the amount of power you'll get. [IMG]http://i10.photobucket.com/albums/a144/nozza401/HeliTXinfo.jpg[/IMG] If you can't see the pic properly, click on the link below.. http://img250.imageshack.us/img250/659/helitxinfo4bb.jpg Hope this helps, Thanks MATT.
Posted on: 10/11/2005 3:54 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3445299
RE: ** WALKERA DRAGONFLY 36 *
[b]HI again borisboy[/b], for the charger situation, just shop around and read reveiws.....it's upto you really....sorry that's not much help....here is an example. http://cgi.ebay.co.uk/LI-PO-DC-1-3-CELL-MICROPROCESSOR-CHARGER-BNIB_W0QQitemZ6004426220QQcategoryZ34056QQssPageNameZWDVWQQrdZ1QQcmdZViewItem I have created an image to show you the settings for the tx.... [IMG]http://i10.photobucket.com/albums/a144/nozza401/dipswitch.jpg[/IMG] These are the settings, If you want to change the PLT/PZT knobs on the front of the Tx move the no:8 key to the unlock position first and then move it back afterwards (lock position)....Hope this helps Thanks MATT.
Posted on: 10/11/2005 12:58 PM by Author "NOZZARCHELI"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3444841
| 
