RE: Gunnin for Glory P51
THANK you Chuck that is what I needed.
Posted on: 8/6/2012 5:22 AM by Author "OI812" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11182639

Gunnin for Glory P51
Hey Iam trying to help a friend who just picked up one of these I can see that it is a VQ model that was sold by Great Planes but Vq's web site says it can damage your computer so no luck there Iam looking for balance point and total weight any help is appreciated again it is a 40 size Gunnin for Glory P51 Thanks
Posted on: 8/4/2012 11:26 AM by Author "OI812" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11180790

Aqucraft Bassboat
Hey I posted this in the scale forum and did not get a response so I will ask here there is an Aquacraft Profisherman Bassboat for sale on Flebay does anyone know anything about these any info is appreciated Thanks
Posted on: 8/4/2012 9:02 AM by Author "OI812" in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11180700

Aquacraft Profisherman Bassboat
There is one of these on FleaBay anyone know anything about these Boats Any info would be helpfull. Thanks
Posted on: 8/3/2012 1:38 PM by Author "OI812" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=11179903

RE: Motor question for RC glider
Could you post some pics also let me know where and how much those motors are thanks Matt
Posted on: 5/25/2012 7:45 AM by Author "OI812" in the forum "Model Rockets & Rocketry"
http://www.rcuniverse.com/forum/fb.asp?m=11094163

RE: 1 cell lipoly esc help??????
Hey dragnse7en just to make sure I have it right ch1 servo ch2 low volt to esc then in the batt 4cell nicad and do you know the low volt shutoff for single lipoly?
Posted on: 1/27/2012 9:03 AM by Author "OI812" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=10930624

1 cell lipoly esc help??????
I just picked up some used pan cars to get started in racing and I want to know is there anyway to run a 1cell lipoly on an old esc can you run power with say a small 4cell for the electronics and 1cell for the motor may be a dumb question but i had to ask before I spend 100 bucks for a 1cell esc Thanks for any help.
Posted on: 1/26/2012 10:06 AM by Author "OI812" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=10928891

RE: Motor question for RC glider
Thank you sir that gives me good starting point we will see how it goes.
Posted on: 1/26/2012 9:59 AM by Author "OI812" in the forum "Model Rockets & Rocketry"
http://www.rcuniverse.com/forum/fb.asp?m=10928880

RE: Motor question for RC glider
REALLY no one on here uses motors from the LHS ?
Posted on: 1/24/2012 2:52 PM by Author "OI812" in the forum "Model Rockets & Rocketry"
http://www.rcuniverse.com/forum/fb.asp?m=10925699

Motor question for RC glider
Hey can anybody tell me what model motor (that I can find at a local LHS) would have the longest run time and does not have the pop to open the chute it does not really matter if it has the pop just wondering if there is one on the shelf that doesn't. Thanks Iam building a a rocket plane that will be carried piggyback then released the motor will be lit in glide. The plane is less than 1 1/2 pounds I figured ya'll would know what off the shelf motor would be best. Thanks Matt
Posted on: 1/21/2012 9:31 AM by Author "OI812" in the forum "Model Rockets & Rocketry"
http://www.rcuniverse.com/forum/fb.asp?m=10919954

RE: STRIPED THREADS FOR GLOW PLUG
Again my expert friends on rcuniverse come through thank yall very much I will give him a call. Matt
Posted on: 11/23/2011 7:49 AM by Author "OI812" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10825428

STRIPED THREADS FOR GLOW PLUG
Hey can anybody help me out I have an OS 60 that has the glow plug threads striped out thought about going to the machine shop to see if it can be heil coiled any help would be appreciated thanks Matt
Posted on: 11/22/2011 2:43 PM by Author "OI812" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10824443

FLOATS
Has anyone put floats on the parkzone micro p51, if not any ideas on size, I also want to put floats on my vapor, Thanks for any help or pics
Posted on: 6/20/2011 9:23 AM by Author "OI812" in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=10583543

LIGHTS
I want to add lights to fly at night does anyone know of a good (light) system that will plug into the receiver thanks
Posted on: 12/19/2008 4:50 PM by Author "OI812" in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=8262243

RE: pylon racer
Clean how do you use the screen trim for the spar I looked at it in the store do you just use it on its side ( front and back of the trim against the corro ) and I know you gave me the measurements but would you happen to have a plan or template I can download I have been all over the net I joined spadworld and no one has a wing build that looks like that wing with no dihederal thanks again Matt
Posted on: 6/4/2008 3:40 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7579991

RE: RIOT 3D
Guess I got a dud if no one here has had one.
Posted on: 5/19/2008 10:09 AM by Author "OI812" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7513951

RE: pylon racer
Iam going to build a 4mil wing just for the practice an weight for the 2mil to come in thanks .
Posted on: 5/17/2008 8:24 AM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7506471

RIOT 3D
Just picked up a Riot 3d little biplane that uses the rimfire motor I have from an old flatout anyone have this plane any sugestions or tips. Thanks guys!
Posted on: 5/16/2008 5:35 PM by Author "OI812" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7504471

RE: pylon racer
Oh well just found out nobody in the area has or carries 2mill coro plenty of 4 mill so how will this work with 4mill should I cut down the spar to get the thinner air foil or will it make that much differance Iam building something this weekend so it will be 4mill. Where is a good place to order 2mill from and what size should I have it cut to ship.
Posted on: 5/15/2008 3:03 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7499921

RE: pylon racer
Iam going to use the woodpecker and glue method on the build how do you ( Mr. Clean) feel about that method I know it will take longer to set but that may give me the time I need to do it right.
Posted on: 5/15/2008 2:00 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7499711

RE: pylon racer
Iam getting all the materials together to give this a shot this weekend. I have done a lot of reading in the past forums and I think Iam ready the only thing Iam not real shure of is the wing could you give me some insight on this do I add coro for the ail. or are they made out of the wing mat. and is there 1 score for the fold or more and how do you make that purdy taper in the wing. Thanks again.
Posted on: 5/15/2008 9:46 AM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7498927

RE: pylon racer
Hey I really do appreciate all of yall's help and hope I dont get on your nerves but as I said this will be my first build and for some reason most of the how to pics are missing do you know of a book or video out there that will give step by step info. I really want to build this and show up those guys with the ARF's who have tryed to talk me out of doing it. I also would not have a problem paying for fullsize plans. Again thank yall very much!
Posted on: 5/8/2008 12:17 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7471416

RE: pylon racer
CLEAN can you get me the plans for the racer I want to give it a try it will be my first SPAD but it sounds like fun. Oh! and buy the way none of my planes are purdy, but they look great flying buy. Thanks again
Posted on: 5/7/2008 1:41 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7467301

RE: KITS
Thank you for all your help
Posted on: 5/7/2008 11:38 AM by Author "OI812" in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=7466827

RE: pylon racer
THANK YOU for your help.
Posted on: 5/6/2008 4:05 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7463538

pylon racer
Anyone have plans for a pylon racer in the 35 size ?????
Posted on: 5/2/2008 5:17 PM by Author "OI812" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=7448895

RE: KITS
[quote]ORIGINAL: Fxrs_tim [quote]ORIGINAL: OI812 Not sure they are just trying to see how many will be interested and Iam trying to look at all costs ofcourse there are ARF's out there but Iam looking cheaper buy getting a build kit just cant seem to find one . Oh iam using a 35 for power again thank you for any help [/quote] You should look at the Club 40 racing. It's already
Posted on: 5/2/2008 3:15 PM by Author "OI812" in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=7448430

RE: KITS
Not sure they are just trying to see how many will be interested and Iam trying to look at all costs ofcourse there are ARF''s out there but Iam looking cheaper buy getting a build kit just cant seem to find one . Oh iam using a 35 for power again thank you for any help
Posted on: 4/16/2008 1:38 PM by Author "OI812" in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=7382026

RE: KITS
I am looking for a building kit not an ARF something 35 size for club race no other real specifics just looking to get in kinda cheap. If it is possible. Thank you for your help!!
Posted on: 4/15/2008 5:44 PM by Author "OI812" in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=7378248

KITS
Where can find a 35 size kit?
Posted on: 4/14/2008 5:59 PM by Author "OI812" in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=7373241