RE: New Zenoah GT-80 misfire
the ignition module? Pete
Posted on: 5/17/2013 11:35 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11514404

RE: New Evolution Engines!! 15GX, 20GX, 33GX
Warren's estimate is spot on. 1/2 oz per minute for planning purposes at WOT. Pete
Posted on: 5/17/2013 4:46 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11514008

RE: Saito FG57 Fourstroke
point of view I apologize for the supply problems we have made for you. Sincerely, Pete
Posted on: 9/14/2012 8:20 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11228326

RE: Horizon Hobby could not help me with Saito trouble, what do I do?
The diaphragm kit for this should be readily available from a local small engine repair parts shop. We (Horizon) will be stocking these soon but currently we do not have these available. D20-WYJ Gasket/Diaphragm Kit I hope this helps. Pete
Posted on: 8/6/2012 8:46 AM by Author "Pete Bergstrom" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11182860

RE: UMS Evolution Radial Care and Operation
Fuel filters. They are the cheapest insurance. Filter it from the jug to the airplane and from the fuel tank to the carb. It will remove sOme stressful moments from your life. Pete
Posted on: 6/19/2012 6:38 PM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11124522

RE: UMS Evolution Radial Care and Operation
Congratulations! That looks great! Pete
Posted on: 6/15/2012 8:32 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11119164

RE: Saito - Pro FG 14 Tips and tricks only!!!
Yes. No problem. Pete
Posted on: 6/12/2012 5:01 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11115348

RE: Saito - Pro FG 14 Tips and tricks only!!!
now but I'm working to have a larger source for this in the future. Pete
Posted on: 6/11/2012 11:32 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11114551

RE: Saito - Pro FG 14 Tips and tricks only!!!
for the felt clunks are: ZEN550085400 Fuel Tank Filter I'd like to hear about your results. Pete
Posted on: 6/11/2012 7:42 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11114299

RE: Saito Gas engine to upgrade from Nitro Saito 82 Engine to Save Fuel Cost
The Saito FG-14 (SAIEG14B) is a drop in fit for you. Comes complete with ignition and metal engine mount. Pete
Posted on: 4/25/2012 9:44 AM by Author "Pete Bergstrom" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11056208

RE: Saito FG-20
It is not a glow carb but a specifically designed gas carb with pump and regulator in a glow sized carb body. The engines are too small to readily accept a Walbro style and this necessitated the new carb design.
Posted on: 4/9/2012 10:15 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11034564

RE: Saito FG-20
We'll be showing the FG21 at the Topedo Show next week. Stop by our booth if you are going to the show! Pete
Posted on: 4/7/2012 1:02 PM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11032056

RE: Saito - Pro FG 14 Tips and tricks only!!!
Yes. That will work. Pete
Posted on: 3/9/2012 11:57 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10993166

RE: Saito - Pro FG 14 Tips and tricks only!!!
. The more it misfires the more it vibrates and it is a never ending cycle. Pete
Posted on: 3/9/2012 11:19 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10993122

RE: Saito - Pro FG 14 Tips and tricks only!!!
Captain2 It does sound like the change that caused the running problem started with the new spark plug. Pete
Posted on: 3/8/2012 1:28 PM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10991789

RE: Saito - Pro FG 14 Tips and tricks only!!!
Captain2 I would start by changing the spark plug and making sure that the spark plug cap is very secure. Pete
Posted on: 3/8/2012 9:07 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10991475

RE: UMS Evolution Radial Care and Operation
How about Evolution Radial Engines - That would be really simple. Pete
Posted on: 3/2/2012 7:59 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10983778

RE: When do you use a retract servo?
"Retract" servos are designed for mechanical retracts, have 180 degrees of throw, and actually shut themselves off at either end of the servo movement so there is not a constant drain on the battery. If you are using a pneumatic retract system most all mini servos will provide the torque needed to operate the valve. Pete
Posted on: 3/1/2012 8:39 AM by Author "Pete Bergstrom" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10982911

RE: Saito - Pro FG 14 Tips and tricks only!!!
_MuffCarbon_072011.pdf Enjoy your new-to-you engine! Pete
Posted on: 2/27/2012 7:19 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10978079

RE: Saito exhaust heat
. Also notice the large exit area on the bottom of the cowl to remove the hot air from the cowl. Pete
Posted on: 2/24/2012 7:02 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10973685

RE: DLE 20 With an ES Composites Tuned Pipe
be about 29" to run well at 8200 rpm. Pete
Posted on: 2/20/2012 3:05 PM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10968033

RE: Zenoah GT-80 Exhaust /RPM
How much time do you have on the engine? Which prop are you running? If you are trying to use the stock mufflers a common fix for that is to drill up through the exhaust outlets completely through the baffling inside. This always resulted in 4-500 rpm increase. Pete
Posted on: 2/20/2012 9:04 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10967478

RE: Everything Radial Engines
Evolution makes some 1.5" (38mm) standoff's EVO3307 http://www.horizonhobby.com/products/standoff-gas-engine-mount-38mm-EVO3307 Pete
Posted on: 2/20/2012 7:55 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10967363

RE: New ZP Engines from Horizon
No - It is an entirely different ignition system We are working with RCExl for these ignitions and the amp draw for the singles is 450mah. And it runs on anything between a 4-6 cell nimh to a 2S LiPo pack. Pete BTW - Thanks for the catch on the hp ratings. I have updated these ratings and it will show up as soon as our web team can get the work done. Pete
Posted on: 2/1/2012 11:29 AM by Author "Pete Bergstrom" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10938714

RE: UMS Evolution Radial Care and Operation
Yes, it is a synthetic ester based oil. Pete
Posted on: 1/27/2012 9:44 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10930675

RE: UMS Evolution Radial Care and Operation
When they run these at the factory the first time a lot of things seat better than when they are first assembled. Your compression will improve after running some. I wouldn't worry about it. The rings haven't even begun to seat themselves. Pete
Posted on: 1/26/2012 6:42 PM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10929732

RE: UMS Evolution Radial Care and Operation
of the day is well worth it to preserve your investment. Have fun with your engine!!! Pete
Posted on: 1/26/2012 3:58 PM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10929447

RE: UMS Evolution Radial Care and Operation
Yes. That will work fine Pete
Posted on: 1/26/2012 11:52 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10929047

RE: UMS Evolution Radial Care and Operation
with the straight methanol). BTW - The installation looks great on that airplane! Pete PS
Posted on: 1/26/2012 6:38 AM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10928536

RE: UMS Evolution Radial Care and Operation
Just call our product support on Monday and they can send you a new package of intake/exhaust tubes. They come packaged as a set. 1-800-338-4639 Pete
Posted on: 1/22/2012 2:53 PM by Author "Pete Bergstrom" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10921942