RE: SD-10G Super
Looks like the final version of the new SD-10GS https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/306812_645899282106188_1362734616_n.jpg
Posted on: 5/20/2013 3:09 AM by Author "Pippin" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11516815

RE: SD-10G Super
Another one: http://www.youtube.com/watch?v=RsTwMNX-XwE
Posted on: 5/17/2013 1:14 AM by Author "Pippin" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11513939

RE: O.S. 60GT
...in English: http://attachments.modelengines.com.au/products/files/38608%5B801%5D.pdf?r=1346825850
Posted on: 9/17/2012 4:04 AM by Author "Pippin" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11230823

O.S. 60GT
Coming soon! http://www.os-engines.co.jp/news/webdir/20/1.pdf
Posted on: 9/16/2012 5:19 AM by Author "Pippin" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11229839

RE: Airtronics sd-10g-super OR Futaba 8fg
A friend of mine bought a Futaba 8FG. He did not like its small size, inputs and soon after sold it. He got the SD-10G instead. Partly, it was my "fault", because I showed him my SD-10G. Airtronics FHSS-3 is fast, secure and offers Safety Link. It outperforms FASST anyway.
Posted on: 9/13/2012 3:12 PM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11227624

RE: Beginner TX probably Airtronics RDS 8000
The RDS8000 set includes one 8ch Rx. I think, this is worth the extra money. I use the 94102z a lot. It's a bit cheaper than the 94322z. But for 40size planes it's a nice and strong servo. Quality wise it is above some other standard servos like the Hitec HS311.
Posted on: 9/8/2012 3:10 PM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11222052

RE: 94772's jittering in ailerons
How about the SDX-851? It looks like the air vision of the SDX-801 (94746) car servo. http://sanwa-denshi.com/rc/car/servo/sdx-801.html http://sanwa-denshi.com/rc/sky/servo/sdx-851.html
Posted on: 9/6/2012 1:41 AM by Author "Pippin" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11219213

RE: ECOMRC Wilga 89
Little video: http://www.rcdepot-jp.com/sab/tbm/wilga89/01.html
Posted on: 8/20/2012 6:51 AM by Author "Pippin" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11199546

RE: Looking for a YS 110? Good Luck!
The current YS lineup: http://www.yspower.co.jp/en/engine/index.html Instead of the 110, I would opt for the 115. Between the 63 and 110 is the new FZ70S.
Posted on: 8/19/2012 2:56 AM by Author "Pippin" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11198440

RE: multiplex Royalevo
MPX is owned by Hitec. Most of the MPX gear is made in Asia, especially for the overseas markets. Some items are still made in Germany and developed by a French guy. In this case you can read it somewhere outside the Rx or Tx. Strange that MPX has only a small footprint in the US. I would expect Hitec behind this.
Posted on: 8/6/2012 11:28 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11183007

RE: airtronics stylus on 2.4
FHSS-1 range is over a mile. http://globalservices.globalhobby.com/globalforum/viewtopic.php?t=24951&sid=e8f6c6422da7d66486f3027f5bd277f3
Posted on: 8/4/2012 2:32 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11180468

RE: airtronics stylus on 2.4
The Stylus module uses the same technology as found in the RDS8000. The reflector plate that comes with the module should help to increase range.
Posted on: 8/3/2012 3:23 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11179385

RE: RDS8000 Heli programming
During programming the radio, did you select the different Flight Modes via the F-Mode button or the Flight Mode switches?
Posted on: 7/29/2012 2:49 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11173026

RE: SD-10G Super
There is a new SD-6G 4WD in the pipe... ...and the super duper M12. Honestly, what do you expect from a SD-10G Super?
Posted on: 7/10/2012 3:49 PM by Author "Pippin" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11150521

RE: SD10/Analog servo?
Servo frame rate of the FHSS-3 receivers is around 100Hz. All of my ATX 94102z servos do not have any problem with that. Hitec's analog servos are a different story. I think they are designed for 45-50Hz only.
Posted on: 6/26/2012 12:34 AM by Author "Pippin" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11132043

RE: Futaba FASST vs FHSS
The T8J does not have the Flight Condition Menu (Flight Modes) for gliders/airplanes. The radio is not made for competition gliders. Thus, it does not need to be a full range radio.
Posted on: 6/16/2012 3:20 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11119967

RE: Warning Graupner USA HOTT SYSTEM
Why? It's not incorrect what I posted: ZKZ-MX-16-20A: EUT Output Power (mW) 110.92 (Source: FCC) I think what you sell are 110.92mW MX-XX radios not 100mW.;)
Posted on: 6/14/2012 2:29 PM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11118338

RE: Futaba FASST vs FHSS
Futaba 8FG FASST: EIRP P=16.77dBm=47.53mW Futaba T8J S-FHSS: EIRP P=13.24dBm=21.095mW As you can see, the 8FG has much more power than the T8J. In a fast plane/in a fibre fuse/many servos and electronics put into the plane, I would prefer Futaba FASST over Futaba FHSS/S-FHSS. The difference is not the protocol itself but HF output power. Well, full range seems to be defined by a marketing department. IMO, full range is the pilot's line of sight. Futaba or rather Hobico states that 600 size helis a more or less end of the line for Futaba FHSS/S-FHSS.
Posted on: 6/13/2012 9:21 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11116827

RE: Futaba FASST vs FHSS
Due to lower output power Futaba FHSS has less range than FASST. The Futaba FHSS antenna is not inside the Tx handle. Just open one Tx and check yourself. Airtronics uses two different FHSS protocols along their line of air radios. The cheaper one called FHSS-1 is similar to Futaba or Hitec's FHSS. The second more advanced protocol called FHSS-3 uses the whole band, is faster and has some extra features like strong interference resistances, temperature resistance, low voltage (down to 1,2V) etc.
Posted on: 6/3/2012 3:11 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11104472

RE: JetiDuplex vs. FASST vs. Hott : any suggestion ?
Strykaas, I would walked into the next LHS and see what they have there. Also service and support are still important factors. And how about your club mates? What do they use?
Posted on: 5/9/2012 12:25 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11073856

RE: Aileron Servos vibrating
There tons of reports about troublesome 7955TG. Just do a quick google...
Posted on: 5/7/2012 7:43 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11071452

RE: Futaba 8J
Yes, the T8J is a perfect radio for smaller planes. But for larger and faster planes or helicopters in demanding environments, I would chose the 8FG over the T8J. 1000m might be great in a static range test (plane not moving). But in the air, you might see different results.
Posted on: 5/2/2012 3:15 PM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11065877

RE: Futaba 8J
Futaba 8FG FASST (AZPT8FG-24G): EIRP P=16.77dBm=47.53mW Futaba T8J (AZPT8J-24G) EIRP P=13.24dBm=21.095mW As you can see, the 8FG has more power than the T8J. See yourself: https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Posted on: 5/2/2012 3:26 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11065118

RE: Futaba 8J
For larger planes, I would still chose the T7C or 6EX FASST radios over the new T6J or T8J "J" radios. The new T8J's RF output power is only 13.242dBm (21.095mW) (r=20cm).
Posted on: 4/30/2012 11:08 PM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11063604

RE: sorry, can't keep my mouth shut about this
Cheap labour in China killed lots of jobs but created far more new opportunities. Actually, I do not know one person who would like to assemble ipods and other gadgets. Or is there anyone who would like to work in an ARF factory covering model planes day and night?
Posted on: 4/29/2012 6:12 AM by Author "Pippin" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11061050

RE: 8FG Super receivers
Thank you for this impressive test. There is only a "little" problem that needs to be addressed. In the test the model is not moving. In a moving model controlled by 2.4Ghz you might get less range than in this static test. Anyway. As long as receiver sensitivity is on pair with Futaba's own stuff, range should be about the same.
Posted on: 4/28/2012 3:25 AM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11059837

RE: 1/5 J2M3 Raiden
Tim, is your Raiden based on a short kit?
Posted on: 4/28/2012 12:31 AM by Author "Pippin" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11059781

New Airtronics M12 coming...
...just found this pick showing the all new Airtronics M12:
Posted on: 4/27/2012 4:04 AM by Author "Pippin" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=11058750

RE: SD-10G training with
I had a SD-5 to usa as buddy box but changed over to a SD-6. 6CH and FLAPERONS are a big plus. Getting the EPA's right is much easier too.
Posted on: 4/26/2012 6:53 AM by Author "Pippin" in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11057378

RE: Airtronics Channel Assigments?
[quote]ORIGINAL: jester_s1 Elevator, Aileron, Throttle, Rudder [/quote] ...Gear, Flaps, Dual Elevator, Ch8. http://www.airtronics.net/index.php/aitdownloadablefiles/download/aitfile/aitfile_id/365/
Posted on: 4/25/2012 1:02 PM by Author "Pippin" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11056471