RE: motor for dynamax fan
[:D]THANKS. SCOPION MOTOR SSEMS TO RUN GOOD. DOES IT HAVE A SHORTER FLIGHT TIME? USE MORE AMPS??
Posted on: 11/17/2009 6:57 AM by Author "RAPPTOR" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9259713

motor for dynamax fan
[:D]what is a good motor for dyn e max fan?? i dont want to go 200mph. just fly a 17 lb plane. 140 mph ?? 6 -7 minutes flight time.
Posted on: 11/16/2009 7:47 AM by Author "RAPPTOR" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9257206

RE: BAE HAWK FLAPS
[:D]THANKS FOR INPUT..I CAN CHANGE HOW MUCH THE SLOT IS OPEN WITH THE PIVOT POINT.MAYBE A LITTLE {SLOT} AT 20 DEG. FLAP,MORE {SLOT} AT 45 TO 50 DEG FLAP. NOW IT STAYS THE SAME,AT ALL SETTINGS. IT GAVE ME A HEADACHE,, I WASTED ABOUT $40.00 IN HINGES,ARMS,WOOD,ECT.. I HOPE IT HELPS PERFORMANCE..
Posted on: 11/3/2009 7:54 PM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9226200

C/G ADJUSTMENTS
[:D]what do the numbers represent when you change the c/g?? 000 is what location in regards to c/g ??
Posted on: 11/3/2009 5:01 PM by Author "RAPPTOR" in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=9225764

RE: BAE HAWK FLAPS
tested new slot idea.3/16 slot to big . no air speed.1/8 slot worked super!! .625 leading edge radius on flap. flat on the bottom side.55 deg flap turns air flow 120 deg.!!totaly laminar...tried smoke but did not set up for a good test. will do it wednesday.used yarn for first test..
Posted on: 11/3/2009 3:54 PM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9225590

RE: BAE HAWK FLAPS
wow .. will save that for bigger project..thanks
Posted on: 11/3/2009 3:49 PM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9225570

RE: BAE HAWK FLAPS
[:D]HI. i have been doing test as you sugested,.. i used shop fan first.very critical on the, radius and, gap set up.3/16 on a .65 radius is what ill use. the hinge pivot point is the real work. over 20 hours in it so far.. lots of ways to do it. i want it to come apart for painting. "thanks for interest." i wish the plane was larger so it would be easier to work out..will post pics for sure..
Posted on: 11/3/2009 6:56 AM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9224510

RE: BAE HAWK FLAPS
THANKS .. I TRY A 3/16 SLOT
Posted on: 11/2/2009 11:45 AM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9222426

RE: skymaster F-16 conversion
[:D]were did you mount the motor? front or rear?
Posted on: 10/31/2009 6:57 AM by Author "RAPPTOR" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9217091

BAE HAWK FLAPS
need help to make scale ,slotted flaps and linkage.. how much does the, air slot ,really help?
Posted on: 10/29/2009 7:36 PM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9213389

RE: skymaster F-16 conversion
STUMAX
Posted on: 10/28/2009 8:23 PM by Author "RAPPTOR" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9210638

RE: Jet Central Problems ... warantee???
[:D]RCISFUN I WAS THE GUY WHO ASKED ,WHAT HAPPENS WHEN YOUR RABBIT PLUG GOES BAD?? OWNER CAN NOT SERVICE IT. BACK TO J/C FOR REPAIR.YOU SIT OUT ON GOOD FLING DAYS.. LOL.. BAD IDEA..
Posted on: 10/20/2009 5:23 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9188856

DROOPS
[:D]WERE CAN I BUY L/E DROOPS?
Posted on: 10/18/2009 6:44 PM by Author "RAPPTOR" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=9183473

RE: Jet Central Problems ... warantee???
[;)]the fact ,that most post are makeing comments about ""ERIC"" and, if he "is", a, NICE GUY ,HONEST,HELPFULL,ECT. speaks volumes!! if its true, it does not need to be said...look,he sells turbines. not the best ,not the worst...priced way to high, some dont run right out of the box.seems to be ,quality control problems...some are great ,some go right back for repair..
Posted on: 10/18/2009 6:22 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9183419

RE: Jet Central Problems ... warantee???
I TOLD YOU THAT THE RABBIT WOULD HAVE GLOW PROBLEMS!!!!!!!!!!!! [&o]
Posted on: 10/18/2009 6:15 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9183407

RE: Eric Clapp & Jet Central Service
[:D]bevar one thing for sure,, ERIC, is the BEST "REPAIR GUY" in the hobby...lol lol lol .UPS LOVES J/C [:)]
Posted on: 10/17/2009 8:52 AM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9180038

RE: Jet Central Problems ... warantee???
[:@]i posted a few comments about j/c and "eric" and it started a war!! eric called me a lier .. guys "are" having problems with the j/c turbines ,but dont want to post them on here. they talk about it at the feild. all - say the will change to another manufacture. the "warrenty sheild", seems to make them more tolerant to eric and j/c. -because you are only allowed to praise j/c and eric,it takes away the impact of the forum to help flyers make a good choice on the product.. even "if" i liked the j/c tubines,i would not buy one ,just based on my incounter with ""ERIC"" you did every thing j/c required to apply the warrenty, and they still found a way to make you pay..sorry ,,but your not alone....[:'(]
Posted on: 10/17/2009 8:36 AM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9180018

RE: Adventures in fiberglass tank molding
[:D]TO MAKE THE LAP JOINT I USE .015 STICKY WAX.COMES IN 1 FOOT SQUARE PIECES. CAN GET THEM ANY THICKNESS.CUT A PIECE 1/2 INCH WIDE.PUT IN THE MOLD JUST BEFORE LAYUP. WHEN ITS TIME TO REMOVE PART,WAX CAN BE MELTED ,OR IT WILL COME OUT WITH PART..
Posted on: 10/12/2009 7:24 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9167736

RE: Adventures in fiberglass tank molding
[;)]use 3/4 oz. mat for molds. much cheaper and easier to use.they sell mat for, epoxy use ,now old days did not have it.. vynalester is the way to go .no hazard like west. dries in minutes. acid wont degrade it. sands super. no flex at all!!!!!!!!! west is to sensative to mix for me.. great job. these tanks had to be made with a 3 piece mold.
Posted on: 10/12/2009 7:15 AM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9165977

RE: Bob Cat Copy Falcon 120 Jet
[:D]i was told that they are for the """spar""" !!!!!!!!!!!!! NOT !!!!!!!!!.THEY ARE ROTATION PINS.USE THEM..
Posted on: 10/12/2009 7:03 AM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9165972

RE: turbine fuel usage
thanks [;)]
Posted on: 10/11/2009 7:10 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9164669

hawk alerion
[:D]what about inboad alerions on bae hawk?[&o]
Posted on: 10/11/2009 2:41 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9164063

turbine fuel usage
in the 14 to 18 lbs range,what turbine has the best mileage??
Posted on: 10/11/2009 2:21 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9164009

RE: Bob Cat Copy Falcon 120 Jet
[:D]HI YES ILL MAKE YOU ONE .. $65.00 PLUS SHIPPING THANKS
Posted on: 10/1/2009 7:57 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9139705

RE: HELP! OS91 & BVM Viojett Locking Collet Needed
I HAVE THE WHOLE ADAPTOR .NEW IN THE BAG.. WILL TRADE FOR A RAMTECH FAN
Posted on: 9/25/2009 4:56 PM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9123696

RE: P-70
thanks [;)]
Posted on: 9/21/2009 8:49 PM by Author "RAPPTOR" in the forum "JetCat Turbine Direct Support"
http://www.rcuniverse.com/forum/fb.asp?m=9113670

P-70
[:o]why is a p-70 case so long??
Posted on: 9/19/2009 7:42 AM by Author "RAPPTOR" in the forum "JetCat Turbine Direct Support"
http://www.rcuniverse.com/forum/fb.asp?m=9107364

amd hawk c/g
[:D]need help with c/g. book says 5 inches fom L /E at fuse.. how safe is this for test flight??
Posted on: 9/17/2009 8:52 AM by Author "RAPPTOR" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9102788

just purchased this f-16 as new!!
[&o]i just got this f-16 from ups. seller said was new never flown. true never flown.i was shocked to see the condition of the plane. some damage from shipping ,like gear doors,linkage ect.. no big deal.. but,there were many mistakes and repairs done out side the factory. called seller. he said it came from skymaster that way.there are sanding marks on wings,wood repair on top of wing,he said he did that ,but never told me of any repairs he did before purchase.he said he repaired the fuel tanks and pressuer tested them. the stopper is missing from one,how did he test it??the vertical stab and rudder is a mess. hinges glued in with gorrila glue. wont move.hinges out of alighn. called seller,talked and told me how to fix all this.. i feel he should have told me about work needed before i purchased it. i have some pics.. tell me what you think.. thanks [:D]
Posted on: 9/12/2009 10:55 AM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9087149

RE: just purchased this f-16 as new!!
[:D]dan,, i paid him $1350.not $1150. no caps for the "phycolagist" ..lol
Posted on: 9/12/2009 5:47 AM by Author "RAPPTOR" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9088920