RE: Experiences buying from xheli.
. Yes the phone calls are a pain, the hold time is a killer. RC REDHOTS
Posted on: 1/8/2012 11:14 AM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10898072

RE: Experiences buying from xheli.
Contact Eric on this forum.
Posted on: 1/8/2012 8:02 AM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10897744

Eric Help!!!
Hello Eric I bought a 450 pro and one of the ball links threads in the swash plate has no threads! I don't think that will work real well in flight! Any thing you can do about this! The part I need is the EXI-20108 Can you help me out???? I will PM you the order number Thanks RCREDHOTS
Posted on: 7/19/2011 4:45 PM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10629286

Out Runner Question
The 10 thousand question? Out runner question. I have a Eagle Tree data logger and need to know how many poles. OK the question is, am I counting the magnets or am I counting the center winding (laminated area) I found all kinds of answers not sure what one is correct. RCREDHOTS
Posted on: 4/12/2011 3:47 PM by Author "RC RedHots" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10458993

RE: The battery question!
Thanks! That is what I thought but wasn't sure. Thanks Again. RCREDHOTS I noticed your screen name my Son works part time for Cane Vision . Raleigh Hurricanes as a camera man. [quote]ORIGINAL: BarracudaHockey Series (S) you add the voltage. Parallel (P) you add the capacity. 3S 3000 in series with 3S 3000 = 6S 3000mah 3S 3000 in parallel with 3S 3000 = 3S 6000mah [/quote]
Posted on: 4/9/2011 5:45 AM by Author "RC RedHots" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10452420

Turingy T600 1100kv
Can someone please tell me for sure how many poles the t600 has, I want to set up my eagle tree logger I know I can remove it and count them but! It mounted and I don't want to remove it. I keep digging on the web and come up with 8, is this correct? RCREDHOTS
Posted on: 4/9/2011 4:55 AM by Author "RC RedHots" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10452381

The battery question!
If I was too run (2) 3300ma 6s 40c batteries in parallel on my 600 heli, would I be getting 6600ma. Or am I still getting only 3300ma to burn off? Thanks! RCREDHOTS
Posted on: 4/9/2011 4:48 AM by Author "RC RedHots" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10452376

RE: Cannot ascend above ground effect
Tying your heli down isn't the best idea.(I personal feel like it dangerous) I know it's fixed pitch but don't know much about it. It sounds like something changed like a setting in the radio or linkage something is broken. Did something happen from the time it was flying to now? [quote]ORIGINAL: trahm My Falcon 40 flew well for a short time. Now with a fully charged battery, it will not get above ground effect no matter how far I advance the throttle. The blades seem to be spinning fast enough to generate lift but no go. If anyone can tie their helio down and measure the rotor rpm at full throttle, it would be helpful. Thanks, Terry [/quote]
Posted on: 3/13/2011 4:53 AM by Author "RC RedHots" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=10396662

RE: HK600 Heli
Hello Mike This is what I have on my HK 600 Hitec HS-422 servos X3 GY401 Gyro and S9254 servo Motor Turnigy 600 4330-1100 KV with 17 tooth pinion (you will have to do the frame mod) Turnigy UBEC 7.5 A running 5 v Hobby Wing 100amp speed control with bec disconnected 5000 ma 6s 40c battery (motor only) 2200 ma 3s 30c battery (servos and RX) I just sport fly maybe a few loops and a few flips. Good enough for me. Change the main gear and auto rotation, and also the tail drive gear. It may not be the best stuff but thats all the money tree had on it. http://www.youtube.com/watch?v=YgvBsTa6vPA Later RCRedhots
Posted on: 3/5/2011 11:57 AM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10380675

RE: Exceed rc blue ray 450 pe
The radio is junk the heli is the KING, I have over 200 flights untill I was a dumb a** and was flying on a day with real high wind and lost it! MY 2 Cents! RC Redhots
Posted on: 2/9/2011 4:20 PM by Author "RC RedHots" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10324389

RE: XHELI
A OK Thanks!
Posted on: 2/1/2011 7:55 PM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10306222

RE: Hobby King order I have been warned
, pain in the rear but it works) RC REDHOTS
Posted on: 1/20/2011 2:49 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10276706

RE: Bone head move
Update I didn't find my 450, but I put out the word at the local airport. And the guy I emailed said he would post it in the office and just by chance maybe someone flying over the area will spot it (HOPE) RCREDHOTS
Posted on: 1/14/2011 2:33 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10263649

RE: Bone head move
Thanks All As for the wind direction EAST. Wind speed I will bet gusts up to 25 or 30 MPG I have a friend that has a full scale plane and I just need to call him. I have a idea in what area, but a 450 is like looking for a needle in a hay stack. I have been out 3 times looking, I didn't give up. But out of the 4 helicopters I fly that was the one I have had the most fun with. My son said he was going to go look for it. And a small bribe was in place. Thanks Again ALL RCREDHOTS
Posted on: 1/12/2011 4:27 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10258909

RE: Bone head move
Oh i did! Learn But I can't say never, because no such thing of never. But I am going to be real sure when I want to fly. Real glad it wasn't my 600. Maybe some day some hunter will find it and just maybe I will find it on my car port. I also don't have the cash to just replace my toys it takes me a little at a time (OVER TIME AT WORK) RC REDHOTS
Posted on: 1/10/2011 4:18 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10253735

Bone head move
And no I didn't have my address inside of it, change canopy a few weeks back. RC REDHOTS
Posted on: 1/10/2011 2:21 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10253444

XHELI
XHELI WHO is holding down the fort? What become of ANDY! IS SOMEONE GOING TO STEPUP AND TAKE HIS PLACE????
Posted on: 1/7/2011 4:04 PM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10246710

RE: HK 600 clone
I will get back to you tonight, i need to pick up my car from the body shop (Hunting with a car DEER)
Posted on: 12/1/2010 1:23 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10169810

RE: HK 600 clone
I put my HK 600 in the air a week or so back it was flying like a dream! I did a few loops, almost perfect did a few flips almost perfect! Then my 5 minute timer went off so I was landing and then the lipo alarm went off Oh well I wasn't high enough for a auto landing or did I have enough experience! Oh yes nice hard drop, servo, landing gear, motor shaft, rod end. (didn't take it out of throttle hold). All took place in about 3 seconds! But it was flying like a dream! Bottom line in all the excitement grabbed the wrong batter pack! 3300 ma 30c. Didn't know about the battery pack until I took it in the house and seen the 5000 pack on the table! And that was the answer why the lipo alarm was going off after only 5 minutes. And yes I know the difference from one to the other. (do for sure now) Just my 2 cents for the day. RCREDHOTS
Posted on: 11/30/2010 5:06 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10168036

RE: Speed Control Question
Thanks for your answer! 1st I am not exactly new in the helicopter hobby rusty but not new! I have a 250, 450, 500 and a 600 helicopter and fly them all! And yes you can mix up the packs! Example 3300 MA 6s 3000 MA 6s 5000 I have hover my 600 on one of the 3 packs (3000 ma and the 3300 ma pack) I was setting up the helicopter and was going to fly and went into the house to get the 5000 ma pack (full Charged) and grabbed the 3300 ma pack!(see now) yes it is different in size but in the excitement! took the wrong pack. What was a easy 5 minute flight turned out to be only a 4 minute and 45 second flight. And yes I do use a timer and a lipo alarm on the helicopter! I could not figure out why the alarm was going off on the helicopter ONLY after 4 minutes and 45 seconds of sport flying! ( a few loops and a few flips) And yes it was the 3300 ma pack I strapped on the helicopter And as for the speed control/s I don't have junk, so what you buy is what you get don't hold. The original question was about the cut off. Oh yea to low to auto rotate. I may just need a check list! [quote]ORIGINAL: mcdaniel HI THERE WELL FOR HELI YOU NEED SOFT CUT, SO WHEN THE ESC SEE LOW VOLTAGE IT WILL REDUCED SPEED, SO YOU CAN SAFETY LAND, THERES NO REASON TO INDICATED THAT YOU CAN CRASH YOU MODEL, IF NOT SET RIGHT. IN THIS HOBBY YOU GET WHAT YOU PAY... GET DECENT BRAND ESC YOU WILL BE FINE. USUALLY ESC USES AUTOLIPO DETECTION FEATURE SO NO WAY THE ESC CONFUSE BATT AS YOU DESCRIBED. SET RIGHT AND YOU BE FINE. FOR 450 HELI RANGE OF 30- 40AMP. [/quote]
Posted on: 11/24/2010 5:01 PM by Author "RC RedHots" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10157310

Speed Control Question
Speed control Question???? I don't want to pick any particular brand. This is a general question! On a helicopter do you use the low voltage cut off? (soft / hard ) or not at all! I know it's is to keep the battery pack from going below a set voltage, to protect the battery I had two incidents in the past year dumb me grabbed the wrong battery pack and it cost me repairs. And Yes I the packs were charged just different ma's I knew I was able to fly safe for 5 minutes with time to spare (with the correct pack), but for reasons I am not going to go into I just screwed up. RCREDHOTS
Posted on: 11/23/2010 5:14 PM by Author "RC RedHots" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=10154835

Andy!!!!!!Raiden T20 1700 KV
Andy any idea when it will be back in stock! Raiden T20 1700 KV RCREDHOTS
Posted on: 11/21/2010 7:29 PM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10150376

RE: Experiences buying from xheli.
[quote]ORIGINAL: NickMcEnjoy [quote]ORIGINAL: RC RedHots I must be the poster child! I have no connection with Xheli Or HobbyPartz! other then buying from them. Maybe my luck is better then others. I have spent a bunch of money in the past year +. I have sent parts back and they have replced them no problem! They may not have the best phone service or answer your email as fast
Posted on: 11/18/2010 4:53 PM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10143794

RE: Experiences buying from xheli.
I must be the poster child! I have no connection with Xheli Or HobbyPartz! other then buying from them. Maybe my luck is better then others. I have spent a bunch of money in the past year +. I have sent parts back and they have replced them no problem! They may not have the best phone service or answer your email as fast as you would like, but the price is great! JUST my 2 cents RCREDHOTS
Posted on: 11/17/2010 6:40 PM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10141941

HK 600 clone
Hello All I have a few questions! This is what I have. HK 600 clone Replace the main & auto rotation gear also tail drive gear and fly-bar cage. I am running a 2nd battery pack with a BEC for the servos I am going to test it out with a 6s 3300 ma (hover only) Motor is Raiden T20A 1700 KV from Xheli 11 tooth pinion (not sure on the head speed yet) ESC Hobby Wing 100 amp platinum pro Servos (3) Hitec HS-422 (4.8 / 6 volt) Tail servo now is a EXI D122F (6 volt) Gyro Detrum GY48V Hobby Parts BEC Turnigy 5-7.5A (running 6 volt) all servos Good Bad No Comment Also only going to sport fly! Feed back WELCOME Thanks RCREDHOTS
Posted on: 10/30/2010 8:43 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10105292

co-pilot II
Hey Guys Call me crazy! I can not get co-pilot II to make my Futaba 401 gyro lock into heading hold.(light on) I did the set up (0 to +100%) (0 to -100%) and all in between! (yes I know the settings are not that high) It works great directly plugged in the receiver (Futaba 6 ex) Am I doing something wrong! I has been sent out and checked out and I was told it was A OK! It's is the same as it was went I sent it out. Is anyone else having this problem? Thanks RCREDHOTS
Posted on: 10/18/2010 8:35 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10077485

RE: exi 450 parts
http://www.xheli.com/60p-erz-040.html Take a look I am not 100% sure, You may want to contact Andy RCREDHOTS
Posted on: 9/26/2010 6:25 AM by Author "RC RedHots" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10027656

tail rotor assembly side plates on a 500
I can't find my original post asking if anyone has tried to cross bolt the tail rotor assembly side plates on a 500 (EXI). (in more depth bearing plates) And the answer is yes you can, and it will clear the belt. I drilled out the assembly so the 2.5 mm socket head screw will trap the two side plates and used lock nuts and washers. So far so good. RCREDHOTS
Posted on: 9/18/2010 4:32 PM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10011086

RE: How does the 250 handle the wind?
My 250 clone is like a fly on a string. Good days and bad, all and all it's fun. RCREDHOTS
Posted on: 9/17/2010 9:16 PM by Author "RC RedHots" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=10009709

Data logger
Has anyone every used the data logger that Xheli or Hobby Partz sale. The one that plugs into the balance plug, logs and records I am guessing amp draw. Just wondering if it's a good investment or a waste of time and money. http://www.xheli.com/88e-aevr100-r1-battery-analyzer.html Thanks RCREDHOTS
Posted on: 9/14/2010 8:24 AM by Author "RC RedHots" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10000945