Which OS engine on kyosho Vone S3?
I dont like the stock kyosho engine in this car. havent started it yet but just completed the build. which OS engine can i mount on it? The OS 0.15 CV has a deep-sunk mount so it doesnt fit. what options do i have?
Posted on: 7/8/2012 4:03 PM by Author "RCFREEK" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11147923

storing DA50 for 1 year-how?
Im moving and wont be using the DA50 for about a year. how do i put it away? do they hv some some kind of after run oil for gassers?
Posted on: 6/29/2006 11:12 PM by Author "RCFREEK" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4447111

RE: kyosho landmax .21 pull start broken
so if i just cut out the chassis a bit n despite the engine sitting a little high, i can still use a starter box without problems??
Posted on: 6/26/2006 12:27 AM by Author "RCFREEK" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=4430937

kyosho landmax .21 pull start broken
I just got 4 tanks of fuel through the engine, when the pullstart broke off. I made it a point not to yank too hard, still it just wouldnt stand the rigours of routine running. Im looking for an alternate to the pullstart. can i use a starter instead? if yes, looks like i'll hv to cut the chassis a bit. is that ok?
Posted on: 6/23/2006 11:45 PM by Author "RCFREEK" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=4424396

RE: LandMax Forum
whats the top speed with the stock setup? also, I've owned the MP7.5 with OS VZB-P .21 engine and also am driving the thunder tiger EK-4 monster truck with a .70 engine. Hv previously also owned a kyosho V-one RR. Wl i enjoy this car for the versatility and speed?
Posted on: 6/10/2006 12:03 AM by Author "RCFREEK" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=4373703

RE: Trouble Installing Models to AFPD
Its version 1.8.0.9 (2004/11/05) . but whats that got to do with installation?
Posted on: 6/8/2006 12:23 PM by Author "RCFREEK" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=4367872

RE: Trouble Installing Models to AFPD
Im having the same problem. Im trying to edit the version from 1.9.0 to 1.8.0 but it is already 1.8.0 on all the planes. What do i do now? still not working.
Posted on: 6/8/2006 1:07 AM by Author "RCFREEK" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=4366564

RE: downloads from AFPD not running
no, they completed n i unzipped the installed files. I installed the planes in the planes directory for AFPD and the sceneries in the same way. Should they just open up when i start AFPD or so i need to do something else?
Posted on: 6/8/2006 12:51 AM by Author "RCFREEK" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=4366528

downloads from AFPD not running
I downloaded planes and sceneries from the AFPD website and even after restarting the sim see that none of them are loaded. Why? am i doing something wrong? pls help
Posted on: 6/8/2006 12:32 AM by Author "RCFREEK" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=4366469

yellowaircraft edge540T, 1.20
Does anybody hv experience with this? Yellow seem to produce really good quality ARF's. How does this fly with the 1.60FX?
Posted on: 4/8/2006 11:44 PM by Author "RCFREEK" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=4142110

yellowaircraft edge540, 1.20
Does anybody know of this? how do u folks rate it in the 1.20 category?
Posted on: 4/8/2006 11:36 PM by Author "RCFREEK" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4142076

RE: Funkey edge540 ,1.20
Its the yellowaircraft edge. I test flew mine today. Flies "biggish". Has the landing characteristics of a trainer. The elev. rates need to be high to do serious 3D. High alpha knife edges are superb. I had my CG set at 4 inches on the root chord and it was flying nose heavy, so it wouldnt do any harriers. besides, elev. deflection was only 20degs or so. Inverted Flat spins were very flat. wouldnt do tumbles due to the CG.
Posted on: 4/2/2006 12:02 PM by Author "RCFREEK" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4114819

what engine on a FK edge540 1.20size?
The Funkey edge540 1.20 size looks superb in build and looks. Does it fly equally good? whats the best engine for it? what websites offer the funkey kits? I want to 3D so i need the wt. to be kept light. pls comment!
Posted on: 3/28/2006 12:18 PM by Author "RCFREEK" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=4093719

Funkey edge540 ,1.20
Does anybody hv any experience with this plane or the sukhoi in the same size?the build quality is superb. I got it used with just 5 flights on it. i hear it comes out at 9.8lbs with a 1.60FX upfront. is that true? how does it fly? 3D capable?
Posted on: 3/28/2006 12:15 PM by Author "RCFREEK" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4093704

where to buy MSC and NX props?
Does anybody know of a website where MSC and NX props both can be bought online?
Posted on: 3/21/2006 11:18 AM by Author "RCFREEK" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4062921

dual elev. setup on JR 9X
When i set the elevator as master and aux2 as slave, the elev. servo lags behind in speed quite a bit. both elev. servos are hitec 5645 MG digital ones. pls tell me what i'm doing wrong. How do people generally setup dual elevators?
Posted on: 3/7/2006 12:18 AM by Author "RCFREEK" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4001827

best prop for DA50
whats the best prop for the DA50?
Posted on: 2/22/2006 10:31 PM by Author "RCFREEK" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3947416

RE: C-rating on lipos?
my motor says 'max efficiency current=6-14A' and 'current capacity=17A/60S' . what does each mean? does my battery suit any one of these?
Posted on: 2/9/2006 12:26 AM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3887922

RE: C-rating on lipos?
yes its hot. so what kind of a battery do i need?
Posted on: 2/8/2006 1:24 AM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3883706

C-rating on lipos?
what does 10C mean in continuous discharge and 13C mean in short bursts when using a 1050mah lipo 3 cell? im using a thunder tiger 17amp motor. the battery only lasts me 8-9 minutes. why?
Posted on: 2/6/2006 11:55 PM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3878871

RE: thunder tiger brushless motors any good?
my thunder tiger 3 cell 1050mah lipo is rated at 10C for normal flight and 13C for bursts. what does that mean?
Posted on: 2/5/2006 10:33 PM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3873815

RE: thunder tiger brushless motors any good?
Kalit84, sorry but i dont live in India. wud've had a better chance if u had asked regd. my country.
Posted on: 2/1/2006 12:32 PM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3854202

RE: thunder tiger brushless motors any good?
sorry, typo in the past line. its AXi 2212/34.
Posted on: 2/1/2006 2:57 AM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3853007

thunder tiger =AXI elec.motors
i hv the thunder tiger 2924/11, which has the exact same specs as the axi2208/34. and the TT 2928/09 has the same specs as the axi2212/34. how do the two compare in terms of performance? the TT motors run fine. so what the hype about axi?
Posted on: 2/1/2006 2:56 AM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3853004

RE: thunder tiger brushless motors any good?
motor is 2924/11. batteries are thunder tiger 1050 mah. prop is a 9x6apc. -what is the max. wt. i can use with this motor? -should i switch props? -should i switch to the thunder tiger 2928/09 motor since it rates 6-14amps and the rpm/v is 920. the 2924/11 has 1100rpm/v. does lower rpm mean swinging a bigger prop? -does the 2924/11 equate the axi 2208/34 in power? -does the 2928/09 equate the axi 2212/54 in power?is this more power than the other one?
Posted on: 2/1/2006 2:50 AM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3852997

thunder tiger brushless motors-performance?
Are the thunder tiger brushless motors any good? I installed a 4-12 amp motor on a 350gm bipe with a 3 cell 1050mah lipo pack. It doesnt give good vertical. hovers at around full throttle. im new to electrics. what am I doing wrong? pls help. ESC is blue arrow 18 amp. a friend of mine has a 250 gm monoplane that flies gr8 on a axi 2208/34. is my motor underpowered or is there something wrong with my battery? could it be a bad ESC?
Posted on: 1/30/2006 10:01 AM by Author "RCFREEK" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3844250

thunder tiger brushless motors any good?
Are the thunder tiger brushless motors any good? I installed a 4-12 amp motor on a 350gm bipe with a 3 cell 1050mah lipo pack. It doesnt give good vertical. hovers at around full throttle. im new to electrics. what am I doing wrong? pls help. ESC is blue arrow 18 amp.
Posted on: 1/30/2006 9:56 AM by Author "RCFREEK" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3844228

RE: DA 50 quits on downline exits
but this is not just a low idle issue. its definitely a faulty carb or else bad tweaking skills
Posted on: 1/27/2006 9:48 AM by Author "RCFREEK" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3831319

tank setups on gassers
My DA 50 seems to quit on 7sec+ downlines. I think its bcoz fuel runs out in the pipes. what kind of clunk setups do you guys out there use? pls help!
Posted on: 1/23/2006 4:27 AM by Author "RCFREEK" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3812406

RE: DA 50 quits on downline exits
I've already done that on ground. It seems to work ok only if the idle is high(around 2300rpm). I checked it by mimicking a 10 sec downline n then moving it up n level. It seems to constrict a bit but then it recovers. It works 80% of the times n 20% of the times it quits. I'm at a loss. I feel like it quits lean. Could it be that during the downlines fuel runs out in the pipes? if yes, how do i setup the tank so that the clunk stay in fuel at all times? what kind of tank setups do people usually use on gassers?
Posted on: 1/23/2006 4:21 AM by Author "RCFREEK" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=3812404