|
RE: WACO YMF
Wow, that was a quick registration service[:D]! Thanks to you, Bill. Glad to become the WACO Brotherhood #65! Hi Bob, Surely will post some pictures or drawing as long as the WACO project moving along. Thanks
Posted on: 9/17/2007 9:23 AM by Author "RCWalker"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=6378154
RE: WACO YMF
Sorry Bill, I made a mistake about your thread. Thanks for your great Waco YMF thread! John, thank you for correcting me about the mistake. I will send bill a note to become a member of Waco Brotherhood. Wallace
Posted on: 9/17/2007 12:05 AM by Author "RCWalker"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=6377298
RE: WACO YMF
Hi John, I will check the website you mentioned. Thanks John, you have been very helpful after I went through your thread from page 1. I will send a mail to the full scale owner in Japan to see if he is able to send me more pictures for those missing instruments. Thanks John! Wallace J. Kao
Posted on: 9/16/2007 11:35 PM by Author "RCWalker"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=6377194
RE: WACO YMF
Hi All, Here are some cockpit pictures of Waco YMF-5C Super I got from the full scale owner in Japan, I am building the same as shown on the first picture from Peter Barth's 1/4 scale kit. I am working on the drawing using Corel Draw, but still missing some instruments located at both upper corners, so I think I have to figure those instruments out myself...
Posted on: 9/16/2007 11:29 PM by Author "RCWalker"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=6376967
RE: Buiding pics Waco YMF-5 Barth Modellbau
Thanks Cesar, I'll write to Mr. Peter Barth for more information. Thanks! Wallace J. Kao
Posted on: 6/11/2007 8:25 PM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5974843
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi all, Can anyone help me on deciding what the best right thrust and down thrust angles are for Saito FA-450R3 engine on the 1/4 Scale Peter Barth's Waco YMF? I way planning to apply 1.5 degree right thrust and 0 degree for down thrust, but not sure if this is enough for such engine. Bernie, Your Waco is really looking good, can not wait to see pictures of fuselage built up. Are you going to make functional front cockpit door? Wallace J. Kao
Posted on: 6/10/2007 8:50 PM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5970298
RE: Buiding pics Waco YMF-5 Barth Modellbau
Thanks to SoCalSal and Cesar, I will keep the firewall straight with 0-0 degree and use either standoffs for G-62 or engine mounting box for Saito FA450R3 once I decide which engine will be installed on the plane. Thanks to both of you again! Wallace J. Kao
Posted on: 6/5/2007 8:33 PM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5949425
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi Cesar, Good to know that your Waco YMF is almost ready for maiden, wish you the best![sm=thumbs_up.gif] I am doing the firewall now, but need to know what is the best way to make the firewall with 1.5 degree right thrust and 0-2 degree down thrust? either the firewall with required angle or keep the firewall straight and make the engine mount box with required angle accordingly? I am planning to use either Saito FA450R3 or G-62 Gaser. Wallace J. Kao
Posted on: 6/5/2007 3:49 AM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5946600
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi Bernie, I was hoping that I could see some pictures of your fuse construction here[:D] I did the bottom half of the fuse, Now checking the tail wheel strut fitting before working on the top..... Wallace J. Kao
Posted on: 6/3/2007 7:06 AM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5937557
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi All, Here is my 1/4 Scale Waco YMF-5 from Barth Modellbau..... Wallace J. Kao
Posted on: 5/31/2007 7:58 AM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5925062
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi Cesar, Thank you for the feedback regarding cockpit door issue, thanks! Wallace
Posted on: 5/14/2007 8:22 PM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5854818
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi Cesar, I attached here with two pictures for your reference, The top view with red line area shows the front cockpit area, it is located on top of both 507 and 508 bulkheads.... The side view with red line area shows the front cockpit door, I may have to cutout the 501 longeron to make functional door... I hope this is clear enough for you to figure out what I am trying to solve [:D]
Posted on: 5/14/2007 6:01 AM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5851830
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi All, Does anyone have any idea of making functional front cockpit door? It seems that I have to cutout the upper left side of the longeron between former 507 and 508 and make another former right after 508. I am worried about if this is going to affect the airframe structure. Your input regarding this issue is appreciated. Thank you all! Wallace
Posted on: 5/13/2007 8:33 PM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5850303
RE: Buiding pics Waco YMF-5 Barth Modellbau
Hi Cesar, It is really enjoyable of reading your Waco YMF-5 building thread. Thank you for sharing, Cesar [;)] I received the 1/4 Scale Waco YMF-5 kit from Mr. Peter Barth about a month ago. After checking all parts in the box, plans and reading throughout the manual, I have to admit that this is the most complete kit I have ever had in terms of quality, accuracy. I will start the build very soon but need to study a little bit more about making functional front cockpit and door and possible chance of converting to YMF-5C Super version. Wallace J. Kao
Posted on: 5/12/2007 5:14 AM by Author "RCWalker"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=5844155
RE: OS FS-120 Surpass-II with a pump
Bax, I have a brand new FS120 Surpass II w/pump that still new in box, recently I am trying to install the engine on my new Sig Spacewalker II, but I lost all instruction sheet. Please email me a copy of the instruction sheet if possible. Thank you! My email address is wallace@aptg.net
Posted on: 7/18/2005 2:10 PM by Author "RCWalker"
in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=3177512
RE: Technopower radials powerfull enough for ziroli dauntless?
I don't thing the Technopower 1/5 Scale 9 Cyl. radial engine can handle Ziroli SBD, unless you are able to keep the weight much lower. I used Saito 450R3 for my Ziroli SBD
Posted on: 4/6/2005 3:33 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2848112
RE: Cessna 182T
[quote]ORIGINAL: Puff Daddy Wallace, If you ever decide to get rid of your 182 and want to ship it to the US, I have a fiberglass cowl and a set of fiberglass wheel pants for a C that I can use on it.[;)] [/quote] Randy, it is a good idea if we can trade in, you can have mine and I can have yours[:D][:D]
Posted on: 3/31/2005 11:36 AM by Author "RCWalker"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=2826972
RE: TF Spitfire build
Wow, glad to hear that you are moving her back here, I am definitely going to see that beauty in person! [sm=tongue.gif]
Posted on: 3/20/2005 11:36 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2784985
RE: Cessna 182T
Paul, Actually, your 182 inspired me a lot, yours is the most scale C182 model I've ever seen[sm=thumbup.gif] Wallace
Posted on: 2/17/2005 11:53 AM by Author "RCWalker"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=2668671
RE: Cessna 182T
Hi Randy, Here is my two year old Cessna 182, never got it finished, should find time to finish before summer[:D]
Posted on: 2/17/2005 7:43 AM by Author "RCWalker"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=2667964
RE: TF Spitfire build
Tim, I am sure the fiberglass should be around at least 2 oz. [:D]
Posted on: 2/12/2005 11:32 PM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2651795
RE: 110" Dauntless project
Joe, It looks cool on your SBD and I like the idea of using carbon fiber for the ribs. Wallace
Posted on: 1/27/2004 5:24 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1471406
RE: Don Smith Me 110 Build
Jim, Your wing center section is looking good[sm=thumbup.gif]. Are you also using the koverall for the tail control surfaces? Wallace
Posted on: 1/26/2004 12:06 PM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1468369
RE: 110" Dauntless detachable stab
Hi Joe, Glad to see you back on your SBDs. I have made the stab detachable, but I still have not done the elevators yet, wondering how to make the elevators detachable as well. Keep the pics coming as soon as any progress and thanks for sharing! Wallace
Posted on: 1/12/2004 6:16 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1422880
RE: 110" Dauntless detachable stab
Joe, Just check in to see if any progress on your SBD? Have a wonderful year 2004! Wow! I just posted and your pics just came right up!! Amazing work on your cockpit!! I also started my SBD and it has been posted on rcscalebuilder website. Wallace
Posted on: 1/12/2004 5:42 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1422871
RE: TF Spitfire build
Glad to see your TF Spitfire construction thread and it is looking good, Tim! Please keep the pics coming and thank you for sharing. Wallace
Posted on: 1/7/2004 2:35 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1408281
RE: More progress on my Bates SBD!
Tom, Just too.......perfect!!! Wallace
Posted on: 12/18/2003 8:45 PM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1362178
RE: Don Smith Me 110
Jim, The flaps and hinges are look so neat on your Me 110. I just got the board, not G-10 but I think should be very similar, gotta try it on my SBD ailerons. Wallace
Posted on: 12/12/2003 12:28 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1346411
RE: 110" Dauntless project - it began
Looking good on you progress, Joe. I am also thinking about making a detachable horizontal stabilizer as it definitely can not fit into my car either. So I would like to know how you do on this portion if you have any pic available. Are you going to make the elevator control surface linkage also detachable with hidden control horn inside the fuse or leave the horn as what the plan shows? it has taken me days to fingure out how to make them all detachable and still not quite sure about which way to go. Thanks! Wallace
Posted on: 11/24/2003 11:47 PM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1303813
RE: More progress on my Bates SBD!
NEO No words can decript your work on the SBD, IT IS A MASTERPIECE!! Just started my Ziroli SBD, comparing with yours, it is going to be a LONG winter for me. Wallace
Posted on: 11/17/2003 1:33 AM by Author "RCWalker"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=1283308
| 
