RE: What Aircraft are you installing your DLE20
Bob Paris, I bow down to a wonderful -full response to my question, with photos also showing the quality of your work. & I really like your finished weight. Many Thanks, Bill rcplanman AMA 6416
Posted on: 8/15/2012 5:30 PM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11194999

RE: What Aircraft are you installing your DLE20
Bob Paris & Jim, Hi guys, my 1st post after watching for a long time. What stick do you havewing span ect.? I'm building a Birdi Stick from Blujay kits w/a span of 82 1/2",calls for a 90 to 140 FSno WT.given. I have a 20cc Aerovate that needed a home. any suggestions ? THANKS, Bill rcplanman, AMA6416
Posted on: 8/15/2012 1:53 AM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11194056

RE: WACO YMF
Stickbuilder, Skypup asked me if the Zenoah G-20 would fly the Great Planes waco.What do you suggest?
Posted on: 7/1/2012 6:22 AM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11138424

RE: WACO YMF
Lins, When those wings are "in the bones" they'll be too pretty to cover. Good luck on your build. RCplanman WB 126
Posted on: 6/13/2012 11:12 PM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11117632

RE: RCAero JC Engines & YDA Engines
STEVE, MIGHT YOU KNOW WHERE THE 805 WAS USED? Bill
Posted on: 5/31/2012 4:15 AM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11100934

RE: RCAero JC Engines & YDA Engines
Steve, My plug gap was off. I'm unable to find a 805 WALBRO carburater.Do you have a sourse there or else where? Why is this carb different then the one I have? Thanks, Bill
Posted on: 5/31/2012 1:29 AM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11100868

RE: RCAero JC Engines & YDA Engines
STEVE, WOW, what a lot of information .Tons of thanks.I'll try to follow ALL of your suggestions. Bill
Posted on: 5/25/2012 8:31 PM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11094948

RE: RCAero JC Engines & YDA Engines
Steve, Thanks for your reply w/info. Sorry for my delay in responding, the server ? was out aall morning & was unableto get to RCU, maybe they are the server. Re; my engin. Frist I've pulled a G-23 off the shelve which should pull the 16 lb. Bi-planeyou think? My 26/28x ? Aerovat has the flat fins, center vertical plug,ploshed crankcase w/jc engin engraved on the back plus abolted plate with jc engin engraved on it. Has a Walbro carb #793A or 921 was also closeby..Is that enough info. to I D the engin ? Thanks again for all the help & advice you provide to the forum, Bill
Posted on: 5/25/2012 12:11 PM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11094502

RE: RCAero JC Engines & YDA Engines
6416 rcplanman WB 126
Posted on: 5/24/2012 5:09 PM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11093650

RE: LiFe = A123? What charger should I use?
RS2K, I'm suprised to see that you never got a answer to your question on Dec of last year. I can't advise you either but I'm wondering which way you went. What ESC do you use & what are you flying now. I also have tried Electric for years but never did go the Debult route.I'm trying to use the Ternergy packs & having problems w/the chargers. Bill billrcboy@yahoo.com
Posted on: 5/8/2012 1:04 AM by Author "RCplanman" in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=11072622

RE: RCAero JC Engines & YDA Engines
Anthony, Not a problem for you-just be careful & watch the parts as they come out. I also think it's the carb, as you lift the cover you'll see a little screen [convex ]that might be dirty. That's a good place to start. IMHO. Good Luck, Bill
Posted on: 5/2/2012 3:05 PM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11065861

RE: How Many Builders Are Left?
RCaddict, DAVID, WOWthat's a great view of your work which looks great. Whose plans do you enjoy the most ?
Posted on: 2/7/2012 2:38 AM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10947659

RE: Seagull Yak?
RowdJoe, I've read where over there [ like here ]they may have subcontractors. How knows.?
Posted on: 2/4/2012 2:09 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10943000

RE: Seagull Yak?
RowdyJoe, they may not all have been built in the same place.
Posted on: 2/1/2012 12:51 PM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10938848

RE: RCAero JC Engines & YDA Engines
milton, I have a rear mounted what I thought was a 20 cc JC . Is it a 23cc ? Good luck on your new venture.
Posted on: 1/29/2012 10:18 AM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10933719

RE: Seagull Yak?
RowdyJoe, What I did once on a G-23 was use a short piece maybe [I don't remember the size ] 3/4 " plastic hose on a short stck. Same idea only the cork could crumble a bit===not good for the carb.
Posted on: 1/26/2012 8:24 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10928710

RE: RCAero JC Engines & YDA Engines
Planeclothes, Well like theyno guts , no glory. You can also put it on a shelf & see how pretty it is. Good luck.
Posted on: 1/25/2012 1:34 PM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10927346

RE: Seagull Yak?
RowryJoe, I have a early V1 ? & it's a bear to start cold but after you get the carb wet & running it'll restart very easy. I pull the plug & give the cly.a shot of starter fluidbingo it'll start. You may have to repeat it but it works. Good luck.
Posted on: 1/25/2012 1:28 PM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10927338

RE: WACO YMF
WacoNut, Thanks for the imfo. ,I'll give it a try on my next plane. Cheers & think Spring, Bill
Posted on: 1/23/2012 5:59 PM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10924066

RE: RCAero JC Engines & YDA Engines
Planeclothes, If you have the piece that broke off try "J B WELD "great stuff. Bill
Posted on: 1/23/2012 3:18 AM by Author "RCplanman" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10922769

RE: WACO YMF
Waconut, Can you give me some imfo. on Stits , your source, how you attach it ect. Thanks. WB#126
Posted on: 1/23/2012 2:41 AM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10922753

RE: Seagull Yak?
Rowdyjoe, What thread do use to discuss your Spacewalker?
Posted on: 1/22/2012 2:00 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10920817

RE: Seagull Yak?
RCVER, How do you like your G-20 ?
Posted on: 1/13/2012 7:17 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10906634

RE: How Many Builders Are Left?
thomas B, Grat project, hope yours turns out well. Elec. should be great. Good luck, Bill
Posted on: 1/1/2012 11:43 AM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10886210

RE: How Many Builders Are Left?
ratshooter, RCreport is now online-same name. Lone Stas had a fire about 2 yrs ago dut as of last summer was back. Need some good wood try Balasa U S A . GOOD SUPPLIER. I also like to build. I just moved & the club I left [after 30 yrs.] had 50 members & I was the only guy who builtsad. I'm looking for a sourse for a set of plans of the " D A DAVIS" 81" span parasail wing. If you or anyone knows of one please let me know. billrcboy@yahoo.com Thanks
Posted on: 1/1/2012 11:00 AM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10886155

RE: Seagull Yak?
Slowand steary, Might I ask ? How long have you been flying with one battery for both ?
Posted on: 12/8/2011 5:02 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10849409

RE: Seagull Yak?
rowdyjoe,if it,s too thin to insert your new hinges-how will proceed ?
Posted on: 12/6/2011 2:13 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10845571

RE: WACO YMF
aminiet, We have to Think Spring!
Posted on: 12/6/2011 2:01 AM by Author "RCplanman" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10845564

RE: Seagull Yak?
Slow and Steady, I just got a BEC from BP Hobbies for 12.95. Bill
Posted on: 11/21/2011 3:19 AM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10821978

RE: Seagull Yak?
Slowand Steady & Rowdyjoe, Thanks for the advice. I had planned to run two packs. It's a brand new engine so I'll be able to do a lot of testing before I maiden it. Thanks again, Bill
Posted on: 11/19/2011 4:13 PM by Author "RCplanman" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10819936