|
RE: Shulman Aviation Turbinator ARF
I did add a touch of down elevator with flap. About 1/8 in at full flap. It's just as Chris said, you do not need elevator mix. I just added a little for those slow speed flybys. I do slow down before flap deployment. The mix just allows a little comfort for slow cruise. And I do mean SLOW.
Posted on: 5/23/2013 9:41 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11520994
RE: Yellow Aircraft F18 tailpipe looking for
tam
Posted on: 5/21/2013 7:46 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11518818
RE: Congrats Scotty!
Here's a couple I had
Posted on: 9/14/2012 8:03 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11228907
Congrats Scotty!
http://www.usscalemasters.org/forums/
Posted on: 9/13/2012 9:01 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11227942
marketplace virus alert
anyone else getting a threat notice?
Posted on: 8/31/2012 7:09 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11213122
RE: FREE**ROUTE 66 JETS 7TH ANNUAL
I'm about to make hotel reservation, anyone want to split a room? Fri and sat night
Posted on: 8/27/2012 5:03 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11208255
RE: Any Jet Pilots near Clarksville TN
one in clarksville that I know of but works away most of the time. There are several of us in and around nashville. we fly some jets at our home field in madison tn. (400ft runway) when we want to fly the good stuff, we go to Bowling Green KY. (800ft runway) come visit anytime
Posted on: 8/27/2012 4:31 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11208221
RE: Smoke oil?
most will say mdw superdri is the best but it's pricey. robart has some that is good, corvis oil is awesome, concrete form release works great and not too pricey
Posted on: 8/23/2012 8:23 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11204080
RE: I'm still around folks.
Tam, you make pipe fo fej 1/7 F-18?
Posted on: 8/21/2012 6:59 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11201541
RE: anyone know this jet or seller?
And a 160 in it? a tad overpowered?
Posted on: 8/5/2012 9:00 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11182415
anyone know this jet or seller?
http://www.ebay.com/itm/271027143551 looks fishy to me
Posted on: 8/5/2012 6:26 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11182247
Bowling Green Ky this weekend
They're having the Vette City Big Bird event this Friday thru Sunday. Jets very welcome. www.skymacrc.com several of us from the Nashville area are going. Lets make it a jet meet!
Posted on: 7/26/2012 6:03 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11170577
RE: How low can you go
Ahh, the old inverted pass trick. When down is up, and up is exspensive!!!
Posted on: 7/25/2012 5:02 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11169225
RE: need help with dreamworks EVSD-5U-PRO
most likely a leak at a cylinder, gear or door. get a few hemostats and clamp of each cylinder til you find the bad one.
Posted on: 7/8/2012 10:20 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11148283
skymaster L-39 cg
I need to re-work the cg on my L39. I seemed to have misplaced the manual. TIA
Posted on: 6/27/2012 6:04 AM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11133604
RE: How to match paint please?
auto parts store that sells paint. some have computer matching or a very experienced paint matching guru at the counter. or try the local hot rod paint shop or custom bike painter
Posted on: 6/11/2012 7:38 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11115088
volz servos
Hey guys, A friend is getting an older Hotspot ready to fly. He has upgraded the batteries to a123. We were worried the volz servos in the fins may not like the 6.6 volts. I can't find any info anywhere about the voltage range on these. It would suck to have to rework the fins to accept new servos. Any ideas? tia
Posted on: 6/6/2012 9:39 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11109625
RE: Help diagnosing AMT flameout (pics)
Most likely there was still air in the uat. There is a process for the first use. You must get all the air out or you will flame out. The process I use is- before installing it, I fill it thru the main line (backwards) with one of the barbed lines closed off, the other goes to a taxi tank or similar. I fill and shake and tap it on the table. Getting alot of the air out. Once I have some fuel in the taxi tank, I reverse the pump defueling the taxi tank while shaking and tapping again. I do this a few times until I know there are no air bubbles left. Then I leave it full and cap it off and install. Should have no issues. I've been running amt's for many years, I can count on one hand how many flameouts I've had. sorry for your loss
Posted on: 6/4/2012 8:39 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11106777
FEJ F-16 1/8
I recently picked up an 1/8 FEJ F-16. After I completely re-do EVERYTHING! I will needs some hints on cg and control throws. The LAR method works pretty well, just seeing what others went with. Oh, and weight also. This thing seems a little heavy. Of course, having car parts in it for nose weight doesn't help. (no really)
Posted on: 5/22/2012 9:49 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11091296
RE: Jets Over Kentucky Week 2012 /
[quote]ORIGINAL: David Jackson [quote]ORIGINAL: Randy M. Lewis, I just sent in my registration. It looks like we should have a good middle Tennessee showing this year. probably 20 planes or so. Keep our spot safe, see you soon. [/quote] Registration mailed yesterday (5/19/12), so probably 20.5 planes. [8D] [/quote] so you're taking the f 4?
Posted on: 5/21/2012 3:39 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11089353
RE: panther or cougar?
Well the F 14 is out of reach- unless I sell everything. So, probably go for the Cougar.
Posted on: 5/18/2012 7:23 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11086301
RE: Jets Over Kentucky Week 2012 /
Lewis, I just sent in my registration. It looks like we should have a good middle Tennessee showing this year. probably 20 planes or so. Keep our spot safe, see you soon.
Posted on: 5/17/2012 8:37 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085217
panther or cougar?
decisions, decisions... love that cougar though.
Posted on: 5/17/2012 8:05 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11085187
RE: old electronic valve ID
the pic got smaller when I posted it. thanks for the tip jk
Posted on: 4/17/2012 4:42 AM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11045421
old electronic valve ID
Does anyone know what kind of valve this is? A friend is doing a refurbish. Would also like to know if it can handle a123 batteries.
Posted on: 4/16/2012 8:06 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11045078
RE: Tail heavy or nose heavy ?
A nose heavy plane flys poorly, a tail heavy plane flys once. I have a Velox and would be very interested in what you have done and how it goes. Need pics and video!!!
Posted on: 3/26/2012 5:42 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11016268
RE: help......
I just checked mine to be sure. It does run the starter motor but I don't think it will start unless the trim is in run position.
Posted on: 3/26/2012 5:34 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11016250
RE: Skymaster L-39 Albatros experiences
I fly mine at the recommended cg with no issue. I agree that the gear mounts are a little weak, especially the nose. The bvm spring upgrades for the gear is a good investment. The stock setup puts a nose down attitude and makes it an abrupt rotation. It's a very nice flying plane and lands nicely with the right speed. Approach is mostly flat with flare at the end. Don't try to drag it in with nose high.
Posted on: 3/17/2012 12:56 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11004236
RE: Jet Flyers Beware, scam artist Shaun Evans loose
George, Youtube is not your friend! I have a kadet lt-40 you can use for practice. Free flight models land better than you land jets...
Posted on: 3/7/2012 9:06 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10990884
RE: Mini Hobby gear door sequencer instructions
hope this works
Posted on: 3/4/2012 4:21 PM by Author "Randy M."
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10986438
| 
