AD F-117 wanted new or used.
I would like an f-117 for my collection. andy help would be great. thanx Rodmunch
Posted on: 2/28/2007 2:33 AM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5487326

RE: killer cockpits need yellow F-4 cockpit
I checked out just the pits but they don't have the f=4 cockpit, what happened to killer cockpits, I can't find them anywhere. are the out of buisness?
Posted on: 2/7/2007 9:00 PM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5386403

killer cockpits need yellow F-4 cockpit
Can anyone tell me where to get a killer cockpit for my yellow F-4, I need 3 of them.
Posted on: 2/6/2007 9:02 PM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5381655

The Jet Man
Has anyone seen this??? http://jet-man.com/playervideo.swf?video=jetman2007.flv
Posted on: 1/30/2007 10:52 AM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5345366

RE: Help with yellow FA-18 Single
Chippurg I bought it here on rc universe. It is a killer cockpit for the yellow single 1/10 scale FA-18. but it don't just fit right in, needs some major modification and I don't want to screw it up. After seeing that awsome turbine install this cockpit kit is the least of my worries. Tam has pretty much sold me on the jetcat P60. there is a hell of allot more to these things than my ducted fans. I really don't have anybody here in northern utah to get any personal help. So anything you guys can help with will be great. Lots of pics...... Thanx guys Rod PS: Shaun I would like to see that video please thanx Rod.montgomery@hill.af.mil
Posted on: 10/25/2005 8:55 PM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=3490074

Help with yellow FA-18 Single
I purchased a killer cockpit for it off of here, no instructions, and it dosn't look like it will fit without allot of modification. I was wondering if anybody could send some picks of there installation. I would like some picks of the turbine setup too, since this is my first turbine jet. any help would be great!!! Thanx Rod e-mail Rod.montgomery@hill.af.mil
Posted on: 10/24/2005 7:23 PM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=3486139

RE: Mystery F-100
It is a Century Jet models F-100. I am curently building this kit. http://www.centuryjet.com/webstore/category.cfm?Category=17
Posted on: 4/16/2005 5:57 AM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=2881492

RE: cbm A-10 & midi fan?????
The instructions are great and it comes with an instruction video that show the complete process from start to fly. Built as the 40 pusher version requires alllloooootttt of wieght in the nose, therefore creates a high wing load. That is why I want to try the electric conversion. The lighter the better at my altitude. I need to know: what brushless motors can I use one speed controller what voltage Lipo's and a wiring diagram I need help I really do not know much about electric setups!!!!
Posted on: 3/26/2005 10:15 AM by Author "Rodmunch" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=2807441

cbm A-10 & midi fan?????
My only electric experience is with a zagi x. I am about 90% finished with the combat models A-10 I have built it extremely light, this is my third one. I would like to make this one electric ducted fan with the new 6 blade wemoteck midi fan. what brushles motors would be best coparably to rpm and price?? what lipo voltage and miliamp?? do I run them in series or parralel or both??? Do I need to speed controllers or just one??? There was a conversion done on the electric jet factory web site years ago and it flew fine with 540 can motors and 20 c cells. I think with all the new stuff out there this thing is cabable of flying extremely well, light, and for a decent amount of time. And sounding pretty scale. Any suggestions would be great. My knowledge of electrics is slim to none. Thanx for any help!!!! Rod Montgomery Clinton Utah ps my altitude in utah is 4400 ft.
Posted on: 3/23/2005 3:30 PM by Author "Rodmunch" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=2797400

RE: Need help with B-2 Project
Yes on the yaw axes with a gyro, this thing will fit wren 44's, if everything works out should be pretty cool. thanx everyone for the replies. Just want to make sure she flies before I invest to much.
Posted on: 7/11/2004 12:44 AM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1979147

Need help with B-2 Project
This is the first model pulled from my mold. I am going to set it up for slope soring first. This airframe is 100% scale. Any Ideas on where the CG is???? It has a 93 inch wingspan. I am trying sloap soring first to make sure she flies.
Posted on: 7/10/2004 12:36 AM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1976901

new flyer
I am looking to get into r/c flying and am looking for a good plane to start with. I have been told that most trainers are not to good because one crash usually trashes them so I should get a zagi to start with. can any one tell me if this would be a good starter and what I would need to get started?
Posted on: 4/13/2004 2:50 PM by Author "Rodmunch" in the forum "Electric Training"
http://www.rcuniverse.com/forum/fb.asp?m=1719680

solidworks files
I just completed a solidworks course at Goengineer for my work, and was wondering if anybody has any files of airplanes I can play around with???? I have tried making a F-117 but still learning this program, any help would be great.... Thanx Rod
Posted on: 9/16/2003 3:42 PM by Author "Rodmunch" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=1140901

Any body know where the CG is on this
Sorry it is a long easy, and the canard had some major crash damage, that is now fixed. The guy I got it from did't know the CG and put it on the main spar. As soon as it left the ground it flipped over backwards. I will try that location and see what she does. Thanx for all the help..... Rod Montgomery
Posted on: 8/7/2003 2:28 PM by Author "Rodmunch" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=1030141

Any body know where the CG is on this
I aquired this bird in a trade, it has a fiberglass fuse and balsa sheeted foam core wings. It is not a Fusco kit. Anybody know who makes it so I can get a manual. Or where the CG might be, I didn't measure the wingspan but it is a 40 size plane. Any help would be great thanx Rod Montgomery
Posted on: 8/6/2003 5:34 PM by Author "Rodmunch" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=1030138

Need Help whith Y/A F-16 A Model
thanx guys for all your help! I just got put on 12 hour days at work, I think (I know) we are going to war, I work for Hill Air Force Base here in Utah. We do Depot level Maintenance on the F-16, I'm in, on, and working on these birds every day, so anybody need any scale details, let me know.... I have a few questions for you Shaun, I will call you, and Joe flyer, if you could scan them pictures that would be great..... My biggest question is the manual says to glue everything with CA, and to use 3/4 glass with CA????? Polyester resin wont stick to epoxy well (polyester is junk), but epoxy will stick well to sanded polyester, I think better than CA??? If I'm wrong let me know...... I paid $20 dollars for the canopy, and $20 for the aim 9's.., if I remember right... Thanx again guys for your help... anything I can help you on with the real F-16, A-10, F-22, C-17, C-130, B-2; that's unclassified, feel free to ask, I'll do my best..
Posted on: 2/6/2003 4:23 AM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=532497

Need Help whith Y/A F-16 A Model
would be great thanx Rodmunch
Posted on: 2/4/2003 6:25 PM by Author "Rodmunch" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=532492