RE: Submarine WTC build
Dave You misunderstand. I have seen your boat. I know they run just fine. I know that you pack more function into your boats then 90% of the modelers out there. I am also aware that you do it at half the cost of most people.I dont doubt your seals (yes they have worked for years). I dont doubt the casings that you use (I have seen you make them work for yourself). Kudos to you and the DIY. You may have missed it but I fully support the DIY hobbyist out there. The fact that I made one correction to an incorrect statement without a personal attack on your design or self is what is key here. I made a correction to information concerning REAL submarines, which I feel I am fully qualified to make. Mater of fact I wear the dolphins to prove that statement. You could benefit from letting out some bilge water yourself. I tell you to spell check because it makes your posts easier to read for the forum users and helps in creating the presence of validity in your statements. NOT because I think your an idiot. The suggestion is for everyones benefit. And now back to the show.
Posted on: 6/25/2012 3:49 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11131623

RE: Submarine WTC build
I dont tote myself as an expert. You seem to have given me that title, thanks. Most of what I have learned, I learned from Mr. Merriman. I would consider him to be an expert in craft and in hobby. All I have done is to reiterate his teachings in a different format and make it available to anyone who seeks to know. Thank you very much Mr. Merriman! Im surprised to see you post Mike. They didn't ban you here yet? Did you threaten to sue them as well or is that a privilege reserved for your customers and competitors? I dont care how aquasub makes his seals or how his work is "goldburgisjh". That is not the issue at hand. I never said that the seals he suggested wouldn't work either. I corrected incorrect information only. If he cannot accept that it was an incorrect statement and needed further clarification that is his problem. However, for those who would read this thread I would rather they know the correct answer. Feel free to support incorrect information on your own forums Mike.
Posted on: 6/24/2012 7:19 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11130413

RE: Submarine WTC build
I have to apologize for any incorrect information and bad guidance you may receive on this forum as well. Please be careful and make sure to use all of the available forums on the internet. Make sure you find out what the reputation is of anyone who is providing advice to you as well. Chances are if hes been banned from all the major sub forums out there, that he has been feeding bad info
Posted on: 6/24/2012 10:25 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11129610

RE: DIY Control Surfaces
I had to host it on the google drive due to the size of the file. Not sure rcu will let me post a 30meg file
Posted on: 6/24/2012 5:45 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11129607

RE: Submarine WTC build
Take your own advice Dave.. and use spell check for once
Posted on: 6/21/2012 3:09 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11126990

RE: Submarine WTC build
Craft is pretty broad, perhaps a clarifier next time. Craft can be defined as: a vehicle designed for navigation in or on water or air or through outer space. Besides this is the sub forum so to assume you are speaking of subs is not to far a stretch.
Posted on: 6/5/2012 2:52 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11107711

RE: DIY Control Surfaces
The link has been fixed. Make sure you reload the page to renew your cache. You no longer need to "save as"
Posted on: 6/4/2012 4:49 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11106438

RE: DIY Control Surfaces
Test worked last night. I will try from a few other computers and see whats going on.
Posted on: 6/4/2012 4:15 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11106399

RE: Submarine WTC build
Full scale subs do not use grease as a seal
Posted on: 6/4/2012 4:11 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11106394

DIY Control Surfaces
Did another DIY article with some free time I had recently. I wouldn't say its my best but we can improve as I receive questions etc. For this one you will need to right click and "save as" on the link. When I tried converting to .PDF the file size went from 1 meg to 32meg... way to large to be useful. http://www.roguesubworks.com/Downloads.html
Posted on: 6/3/2012 2:12 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11104973

RE: RPMTECH AND 1/72 KILO KIT
What forum?
Posted on: 6/3/2012 9:55 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=11104773

RE: Submarine WTC build
http://roguesubworks.com/downloads/diy-rcab.pdf
Posted on: 2/24/2012 3:04 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10974302

RE: RPMTECH AND 1/72 KILO KIT
http://www.rcgroups.com/forums/showthread.php?t=1538660&page=2
Posted on: 2/7/2012 1:45 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10948462

RE: RPMTECH AND 1/72 KILO KIT
He made a post on one of his forsale classifieds on rcu in mid Jan. You might be getting ignored.
Posted on: 2/5/2012 10:25 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10945121

RE: how to scratch build hulls?
Steve neil made a book called RC Submarine modeling for dumb asses http://sneillfx.com/page28 It really is worth the purchase price. There are also quite a few build threads on the "lost foam" technique on www.subcommittee.com Most recently one from a guy doing his first scratch built Russian Alfa
Posted on: 2/5/2012 10:18 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10945112

RE: 2.4 radio in a sub?
yup this has been covered many many times. It wont work because of the frequency.
Posted on: 2/5/2012 10:12 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10945102

RE: Custom boat transmitter!
I discussed it with a few of my friends (as we were all interested in this product) and the conclusion was that it was a bit expensive. We do not doubt the time and labor that went into it but it is a "luxury" item as it is not necessary for normal rc control. Send me an email we should talk.
Posted on: 10/14/2011 4:37 AM by Author "Rogue Sub" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=10764630

RE: Custom boat transmitter!
have you considered adding a mounting point for a neck strap?
Posted on: 10/11/2011 2:27 PM by Author "Rogue Sub" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=10760258

RE: Custom boat transmitter!
I would take one of these. Id also be happy to host them on my site for you.
Posted on: 9/23/2011 5:54 PM by Author "Rogue Sub" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=10731152

RE: Converting a scale kit to rc
Dave Welsh makes a wtc for this kit but if you want the fittings kit you will only be able to get it from caswell.
Posted on: 9/18/2011 7:57 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10722331

RE: water detection system
There was an article in the SCR a few years ago on how to make one yourself for about 10 dollars. It is only an led, resistors and a darligton bridge. I had never made one before and was able to create one using the provided article. If you like I will try to find it later.
Posted on: 9/18/2011 7:55 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10722327

RE: WET MOTORS
I think he used two 400 size motors direct drive. These are old pictures though and he may have changed the entire set up by now.
Posted on: 9/18/2011 7:53 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10722325

RSW Seals now available
After testing these for two seasons I am now confident to share them with everyone. RSW now has seals available for purchase in the MCS section. http://www.roguesubworks.com/mcs.html
Posted on: 9/18/2011 7:50 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10722321

RE: Important Notice about RSW
I have returned from assignment and am ready to assist everyone again. To those of you that waited till I came back, a big thank you.
Posted on: 4/19/2011 4:08 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10471623

Important Notice about RSW
As of today RSW will be off grid for the next few months as I am being sent to Japan to assist in combating the nuclear incident. I am sorry for any inconvenience and ill update all of you as I can. Kevin Price RSW
Posted on: 3/16/2011 8:16 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10403521

RE: Seaview Concept II
Looks like a lot of fun dennis. Are you going off available photos, just clips from the show, or just doing however you darn well please??
Posted on: 3/14/2011 4:40 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10398585

RE: Does it exist?
Check Mikessubworks.com Not sure if he ships to canada but its worth asking.
Posted on: 2/27/2011 3:17 PM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10368052

RE: Does it exist?
yup the thunder tiger neptune
Posted on: 2/26/2011 5:06 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10364697

RE: Shelly Foss Tug Build 76 inch
wow touring around in a motorhome sampling the lakes of america with your tugs...good times
Posted on: 2/22/2011 2:38 PM by Author "Rogue Sub" in the forum "RC Scale Boating"
http://www.rcuniverse.com/forum/fb.asp?m=10355913

RE: Seaview Concept II
I initially had my reservation about an 8 window version but, it looks mean! I like it!
Posted on: 2/20/2011 5:04 AM by Author "Rogue Sub" in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10349656