RE: JETS OVER THE CAPE 2009
Just 30 min from the house and for the second year i miss it. Well maybe next year I will not have to work :(
Posted on: 10/17/2009 2:53 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9180651

RE: Fei Bao, Global Jet, Skymaster, Fly Eagle? which is good?
if you like good paint check out the Der-Jet F9F-8 Cougar. quality is awesome and you can't beat the service you get from Eric http://www.jetcentralusa.com/DER_JET.html
Posted on: 9/27/2009 10:52 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9127182

RE: wren 44 blade failure
here we go again...
Posted on: 9/27/2009 10:48 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9127174

RE: how too need advice, tips trick
thanks
Posted on: 9/26/2009 3:08 PM by Author "SGT.SHAGGY" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=9125621

RE: Super Jet South UPDATE!
I think that I am going to plan my vacation around this event next year. Looks like you guys are having a blast already!
Posted on: 9/25/2009 7:27 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9124020

how too need advice, tips trick
Covering or recovering is not my thing... here is the story I got an airplane nothing fancy nothing spectacular but it will work for what i need it for. aerial photography. airplane is ready to fly just need to replace rx batt. but the covering is BAD and i mean BAD holes in the wing, and you can tell there is layer upon layer of covering on it. Some areas are even covered with packing tape to fix holes. We started to remove the old covering and some came off great, other areas, well you can tell it was CA'd down to hold while shrinking. Whats the best way to remove covering? I want to get it all off and put some clean ultracote on. So what are the best ways to get it off. Also, because i am not trying to make this thing perfect, is it ok to cover over some of the smaller areas say dime size or less? thanks
Posted on: 9/25/2009 7:15 PM by Author "SGT.SHAGGY" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=9124001

RE: jet central smoke pump
Jumped in this one a little late. To answer the power questions, battery range is in fact 4.8 throug 7.4 for best performance. Our system is "instant on - off" by design and the flow rate is controlled by the battery chosen; ie: 4.8 will deliver a nice flow rate, however, 7.2 - 7.4 puts out dense smoke. As for nozzles or spray bars, you can use one or two. Two are supplied. Andy Kane's big twin Super Eagle powered F-15 uses one spray bar per turbine which generates awesome smoke using 7.4 v 2s2p LiIon Duralite pack. Instant off due to the use of a solenoid gives the security of no residual oil drip. Smoke system package complete with everything except battery sells for $225.00 and is in stock at our Florida office. We will have smoke systems at GA. Jets Super Jets South. Look forward to seeing everyone. Any questions, pleased feel free to email me @ jetartessales@aol.com Best regards, Eric
Posted on: 9/13/2009 9:55 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9093340

RE: Nitro Planes New! Twin EDF HA-420 Honda Jet
how scale would you say it is? and how much thrust will each fan unit need to provide for flight?
Posted on: 8/15/2009 7:22 PM by Author "SGT.SHAGGY" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9018947

RE: MIBO A10
I found this scheme that is very close http://www.onmarkint.com/static/images/9/98201/98201a.jpg on franklin mint page it states that this is the Peanut Camouflage 917 TFW , Barksdale AFB. Experimental desert scheme and then also found these images
Posted on: 8/14/2009 2:57 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9016393

RE: 5% oil for Falcon?
Pete: I know you received a manual with the turbine you purchased. Manual clearly states 2.5% oil to every 5 gallons. You may use 5% however, it is not necessary. Regards, Eric Clapp
Posted on: 8/4/2009 10:14 PM by Author "SGT.SHAGGY" in the forum "Jet Central Turbines - Artes Jet"
http://www.rcuniverse.com/forum/fb.asp?m=8990716

RE: Can I get a WITNESS???
Dont mess with my family, or my fellow service members/Vets!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Anyone who served this country no matter what there Job was has my respect. And I would stand beside anyone of them. I served, was not in the rear, always in the mix, but let me tell you I respect the Cooks we had just as much as my fellow team members who were right beside me when things got crazy. Much respect to Mr Watson. He had it ten times worse than I did. So it does not matter if your a cook, supply SGT , Radio opp or out in the mix each role is important in its own and supports the actions of the Unit as a whole. enough said
Posted on: 8/3/2009 4:06 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8986772

RE: Custom paint available for YOUR jet!!!!
The true flames are Sick with the Skulls blended into um. what a lot of people do not understand when you tell them a 2k or 3k paint job is the amount that actually goes into the price of the paint. I needed two colors for touch up and it was 180.oo smackers just for the two pints. then there is the hardener , and the flex additive ( if being used) then there is the labor that goes into the prep before you even get to paint..... Jobs look great.
Posted on: 8/1/2009 3:42 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981718

RE: TURBINES -BEE OR JET CAT 60
[quote]ORIGINAL: KC36330 [quote]ORIGINAL: SGT.SHAGGY AND that is why someone looking at a used Jet Central turbine would call Eric with the SN to see if it was manufactured after the LTW was put into place or if it had been upgraded to the LTW. Then they would know if the LTW is transferable. [/quote] your first comment insinuated that they all had one, i was clearing it up that not all
Posted on: 8/1/2009 3:28 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981692

RE: Chris's Nano Build UPDATE First Flights
Boomers are great. Lost my baby boomer to a mid air with a prop job 3 years ago. just replaced it with the sprint. Sprint is unpacked but not started yet do to several other builds.
Posted on: 8/1/2009 3:19 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981667

RE: TURBINES -BEE OR JET CAT 60
[quote]ORIGINAL: KC36330 [quote]ORIGINAL: SGT.SHAGGY with any Jet Central turbine that is for sale you can always contact Eric with the SN and he will look up complete history for you. Also The LTW is transferable [/quote] not all Jet Centrals have the lifetime warranty so there is nothing to transfer and that's a mistake made by a few people buying used. [/quote] AND that is why someone
Posted on: 8/1/2009 3:12 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981651

RE: TURBINES -BEE OR JET CAT 60
with any Jet Central turbine that is for sale you can always contact Eric with the SN and he will look up complete history for you. Also The LTW is transferable
Posted on: 8/1/2009 12:50 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981410

RE: Best flying skymaster?
Viper or the ( not a scale airplane but the Dragon ) The dragon flies very well on a 30 lbs'er lands very nice and tracks in the air nice as well
Posted on: 8/1/2009 11:26 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981270

RE: TURBINES -BEE OR JET CAT 60
[quote]ORIGINAL: rcmigpilot I would tend to agree if someone were buying a new engine, but there are no Rabbits available used. There are, however a lot of good used P-60s, P-70s, and Bees available for good prices. [/quote] used rabbit for sale here is the link http://www.rcuniverse.com/market/item.cfm?itemId=536088 super bee http://www.rcuniverse.com/market/item.cfm?itemId=536078
Posted on: 8/1/2009 10:46 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8981200

RE: Der Jet Model new product F-9f8 cougar and video
[quote]ORIGINAL: meps I really appreciate the update as I'm following the progress of this airplane very close. Just as Tres said, we'll each be getting one after all the testing and reports are done. I assumed that this project had been dropped due to lack of post concerning the airplane after it was posted that more videos and such would be posted very soon. It is one of my favorite models. I've owned three smaller cougars that were ducted fan models in the past and truly loved them. If at vall possible, I would like to see pictures of kit components. How robust are the gear? Once again, Thanks for the update. Steve [/quote] As soon as the next kit gets to FL I will take pictures of the components included, and post them on the web site. www.jetcentralusa.com . I also am working on publishing the manual to the same site.
Posted on: 7/31/2009 2:10 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8979180

RE: Rhino Powered Shock Jet
Are you done yet Bill. Dont know if i am free on Sunday, but if so Ill swing out to the field
Posted on: 7/31/2009 1:57 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8979148

RE: Jets Over Kentucky Week
Lewis... once again great event... i cant believe that I didnt come last year..... you can count on me next year.
Posted on: 7/19/2009 9:52 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8945774

RE: JET FLIGHT INSTRUCTION?
[quote]ORIGINAL: causeitflies [quote]ORIGINAL: SGT.SHAGGY What he said.......... you will be ok. just play with the flaps at a higher altitude and figure out that bird. Stall ect [/quote] That was 3 1/2 years ago. Hopefully he's flown it by now [:D] [:)] [/quote] wow....... how did it end up on the first page..... LOL yeah I hope it has flown by now.......... i was questioning the 3g remark
Posted on: 7/19/2009 9:42 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8945764

RE: JET FLIGHT INSTRUCTION?
[quote]ORIGINAL: seanreit One tidbit of information I pass on to potential jet freeks, if you see enough value in building a turbine or high end airplane like that EDF you've got there, you are more than likely ready to fly such an animal. Very rare does someone put together a good looking jet and then not have the skill to tackle it. So run with the odds and have a blast! [/quote] What he said.......... you will be ok. just play with the flaps at a higher altitude and figure out that bird. Stall ect
Posted on: 7/18/2009 8:31 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8944595

RE: Jets Over Kentucky Week
Great vids marvin..... still love the Foamy mid air and you in the background going i got it, i got it.... lol priceless
Posted on: 7/18/2009 2:53 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8943969

RE: Jets Over Kentucky Week
you have got to post the head on mid air vid..... that was crazy
Posted on: 7/14/2009 10:49 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8934295

RE: Jets Over Kentucky Week
Marvin, You forgot to sign out of rcu at the hotel...... I was thinking bad bad thoughts but decided to be nice even though bevar was really trying to get me to be not so nice. Could have had a lot of fun LOL great pics of the event and that F-16 of yours was sweet oh i signed you out.......
Posted on: 7/14/2009 3:57 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8932999

RE: Jets Over Kentucky Week
Well Pablo did get the A-7 in the drawing, funny thing is he bought enough tickets to just about buy one out right
Posted on: 7/13/2009 1:15 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8929209

RE: super bee flameouts
Eric is on his way back from KY jets. He will be back in the forum by tomorrow if not tonight when he gets back
Posted on: 7/13/2009 1:03 PM by Author "SGT.SHAGGY" in the forum "Jet Central Turbines - Artes Jet"
http://www.rcuniverse.com/forum/fb.asp?m=8929168

RE: Jets Over Kentucky Week
Lewis, I simply had a blast. You had me on the run a lot, but we do what we have to do. The GA Jet guys, Shane, Jed and the rest of them volunteered for trash duty each and every day picking up everyone's trash bags to keep the pit area clean. The T 28 event was great to watch. I know next year that I will have a T-28 so i can participate. Even though there were only a few flight line personal it ran like clock work. Everyone was there to have a good time, and I think that everyone had a great time. I know that I did. A lot of laughs were shared and new friends made. I'll be back and as i said before I am going to try to talk my wife into coming as well. Jullian will be walking by then and he will have to tag along. I still cant figure out what Paul is going to do with the Velox xl.... Maybe clipping the wings or something LOL. Great time, great food, great friends, great flying and some spectacular saves.
Posted on: 7/13/2009 10:07 AM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8928707

RE: Jets Over Kentucky Week
Lewis, Cant wait till next year. Hope to bring the Family with me next time.
Posted on: 7/12/2009 8:29 PM by Author "SGT.SHAGGY" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8927436