RE: chevy s10 v8
Nice truck. I've done a few V8 S-dimes. Love 'em!
Posted on: 12/19/2011 8:05 PM by Author "SPADinfluence" in the forum "Cars & Trucks - Full Scale"
http://www.rcuniverse.com/forum/fb.asp?m=10867451

RE: Tower does it again! Updated 12/21/11
My father has been shopping with Tower since the '70's, until he quit flying right before his passing. I have used them as well for years with 100% success. Had a bad Tower .46 engine a couple years ago, no sweat, BAM new engine on my doorstep. I like Tower but still try to buy locally when I can. It's a shame I have to drive a minimum 20 miles to get to a LHS..But I'll do it when I can.
Posted on: 12/19/2011 7:52 PM by Author "SPADinfluence" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10867431

RE: 80
This thread is worthless without plans LOL! They look great!
Posted on: 12/19/2011 5:49 PM by Author "SPADinfluence" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=10867276

RE: Have You Flown an RC Model Under the Influence of Alcohol?
i don't drink. i don't capitolize. i dont care. nor do i speel very goot. ;)
Posted on: 12/15/2011 8:59 PM by Author "SPADinfluence" in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10861798

RE: Best Songs
After seeing this: http://www.youtube.com/watch?v=-aAigQRZzqQ This song is my go-to for flying now...: http://www.youtube.com/watch?v=DWaB4PXCwFU&ob=av3e
Posted on: 12/5/2011 11:48 PM by Author "SPADinfluence" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10845506

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Any odds of getting a replacement cowling (Engine cover) for this plane: http://www.nitroplanes.com/ex3309063arf.html I would pay for one if I can get one ordered and shipped.
Posted on: 1/21/2011 2:44 PM by Author "SPADinfluence" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=10278881

RE: Nitro Models Extra 330 90 - 63
Would this be a decent replacement for the E-flight 60 or 90 series motor? Less $$$ for sure! http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idproduct=7709
Posted on: 1/19/2011 4:56 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10274869

RE: Nitro Models Extra 330 90 - 63
I've decided after finishing mine with the GMS .76 that I want to go electric to save the covering and I'm tired of nitro anyway...So I have to ask (And I will re-read the entire thread as well), what should I run for motor/ESC/batt to make mine have a power to weight ratio for 3D hovering and good vertical? Anyone need a never run GMS .76?
Posted on: 1/19/2011 3:26 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10274695

RE: Heli stuff and fellowship
Thanks for the help everyone! I'll be checkin' out the classifieds here as well as lookin' around. 70 degree weather here makes for good flying weather!
Posted on: 12/31/2010 2:46 PM by Author "SPADinfluence" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10230327

RE: Heli stuff and fellowship
Hey everyone! I'm a fixed wing wienie by tenure but have owned and repeatedly tore up a Blade CP Pro...Have been outta helis for a while but itchin' to get back at it now that I have a better idea how to fly one!! Looking at a 450 size electric...Any thoughts on a decent one? Thinkin' a Blade 400 or Axe 400 but I dunno....was pretty clueless when I was flyin' my CP Pro, but now I can do most anything I want on a realflight version 5, which I KNOW isn't the same but the principles are though...Just need a little stick time to get used to the particular model I am on..
Posted on: 12/29/2010 7:18 PM by Author "SPADinfluence" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10226376

RE: One Airplane for the rest of your life...?
I would have to say...I cannot say! I can't have just one plane!
Posted on: 2/9/2010 11:39 PM by Author "SPADinfluence" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9491773

RE: Nitro Models Extra 330 90 - 63
Updates?
Posted on: 11/21/2009 10:58 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9271094

RE: spazzler wing
This is one I did.. http://spadworld.net/forum/viewtopic.php?t=17051 [image]http://i184.photobucket.com/albums/x277/crashonmyhead/100_3731.jpg[/image]
Posted on: 10/22/2009 5:26 PM by Author "SPADinfluence" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=9194146

RE: We need your one-liners!!!
I ate a big bowl of ooops this morning I guess.
Posted on: 10/22/2009 5:18 PM by Author "SPADinfluence" in the forum "RC Humor"
http://www.rcuniverse.com/forum/fb.asp?m=9194130

RE: One wing landing
That's nuts!
Posted on: 10/13/2009 5:58 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9170559

RE: Nitro Models Extra 330 90 - 63
So who else has theirs flying?
Posted on: 10/11/2009 12:19 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9163752

RE: 3D TRAINER - PROFILE???
That second vid from Nashbash was awsome and the editng was great! What a blast it looks like!
Posted on: 10/5/2009 10:02 AM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9147885

RE: Nitro Models Extra 330 90 - 63
What about this engine? 31oz with muffler would help the balance factor no? http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDXL8&P=0 [image]http://www2.gpmd.com/image/g/gmeg1120.jpg[/image]
Posted on: 10/4/2009 2:35 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9145911

RE: Nitro Models Extra 330 90 - 63
Hmmm, tail heavy eh? Gonna start on mine this week, but still can't decided what to put in it....GMS .76 or what? Thinking Futaba 3152 servos? Dunno what to do!
Posted on: 10/3/2009 10:05 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9144536

RE: Futaba fasst 2.4??????
Which Transmitter were you using? Were you in range check mode? I have a 7c 2.4gh and have had no issues. Sounds like you simply had a range problem, or were pointing the short antennae in the transmitter at the aircraft. Are the small antennae in the plane routed 90 degrees apart?
Posted on: 10/3/2009 9:48 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9144504

RE: Coro supplier in Tn
Just look in the yellow pages under sign shops. Most will order you coro if you ask nice.
Posted on: 9/15/2009 6:41 PM by Author "SPADinfluence" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=9098379

RE: Extra 330 90-63
Updates on the build?
Posted on: 9/14/2009 6:26 PM by Author "SPADinfluence" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9095597

RE: Meet POKEY
Sweet! Plans?
Posted on: 9/14/2009 6:18 PM by Author "SPADinfluence" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=9095578

RE: Nitro Models Extra 330 90 - 63
[quote]ORIGINAL: fast_eddie70 SPADinfluence - Have you started assembly? Just curious on what you are doing and if you are having the same problem with ballancing this plane. [/quote] I am moving in like a week and a half, so I don't want to strew it all over and then lose half of it moving. I did take it all out of the box and check it all out. No damage from shipping and looks fairly easy
Posted on: 9/13/2009 6:23 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9092670

RE: 725r Ryobi needs a home-Which plane?
[quote]ORIGINAL: mdavies31 A 80'' wingspan SPAD DPS works great. [/quote] Need more pics! Plans to scale it to? Did you just scale up the regular DasPlastic?
Posted on: 9/10/2009 9:09 PM by Author "SPADinfluence" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9085401

RE: 1/4 scale SPAD Fokker D-VII
Awsome pics and video! Love the dogfight!
Posted on: 9/10/2009 6:02 PM by Author "SPADinfluence" in the forum "S.P.A.D. Aircraft - Coroplast design"
http://www.rcuniverse.com/forum/fb.asp?m=9084970

RE: nitro planes extra 300s????
Mine came yesterday that I ordered from them. Very well done IIHO. Needs a little reinforcement in spots but overall a good plane for the $$$.
Posted on: 9/10/2009 10:09 AM by Author "SPADinfluence" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9083994

RE: Mini Me ??
The little one forgot his shoes!
Posted on: 9/10/2009 10:07 AM by Author "SPADinfluence" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9083984

RE: Nitro Models Extra 330 90 - 63
Got mine today. And after looking it over, I wouldn't try to put a gasser in it. Way too light a plane. But a 120 ought to yank it around with authority! The fit and finish was really good, better than a lot of the stuff at my LHS. Looks well put together, and like all ARF's, needs little reinforcement here and there to really wring it out, but overall a super cool plane for the money! The instructions had my girlfriend and I totally cracking up!!! Funny reading there I tell you!
Posted on: 9/9/2009 6:49 PM by Author "SPADinfluence" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9082383

RE: 725r Ryobi needs a home-Which plane?
That DPS is the bomb! I am thinking about a corocub like this one.. [image]http://www.spadtothebone.com/SPAD/corocub/CoroCub_1.jpg[/image] Or the ultra Spadstick.. [image]http://www.spadtothebone.com/SPAD/ultraspadstick/page_1.jpg[/image] Think it will work for the weight to have plenty of power? http://www.spadtothebone.com/freeplans.htm I'm thinking of blowing it up 150% from the plans. With a clipped wing it comes in at like 90 span and around 12 lbs. What you guys think?
Posted on: 9/9/2009 2:52 PM by Author "SPADinfluence" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9081853