Cheap 4WD off Roader for bashing?
Hi guys, and again I need your help, i want to "bash" with some of my friends which all drive 4 WD Truggies, but this is my first attempt and so i dont want to spent too much money in it, because i dont know how long i will like this hobby. Therefore i am looking for a cheap offroad Buggy/truggy for the beginning. Are there any Cheap but good models which you could say these would be ok for that? I have $300 to spent for the car, charger and lipos will be bought seperately Best regards frank
Posted on: 5/17/2013 3:01 AM by Author "Silk789" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11513969

Information about the Leopard AS1 ???
Hi guys I hope you can help me, I have an old Tamiya Leopard 1A4 and I want to convert him to the Australian AS1 tank, but in the web I can find not many information about it. Do you know a good book ore anything else, or a Homepage? Especially I need infos about the instructor cupola, like this: [img]http://anzacsteel.hobbyvista.com/Armoured%20Vehicles/Images/leo24ph_1.jpg[/img] because of that i just find 2-3 photos without details. Best regards Frank
Posted on: 9/9/2012 10:52 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11223376

Leo conversion from 35rctank.com?
Hi guys, i shot a cheap Leo 1 from a collague from my work. But its the old old old edition ;) And after googling the whole day i found that: http://35rctank.com/html/k11.html what do you think about it? or does anyone of you already have tested it? Best regards Frank
Posted on: 9/7/2012 1:31 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11220990

Need help with Russian S-51 need input guys ;)
Hi guys ;) I have just a silly question, does anybody of you know wehre I could beter and more information about the russian S-51 artillery? I just have found this WoT Page with some Infos and 3 Pictures: http://wiki.wot.go.vn/index.php?title=S-51 My favourite Question is does anybody of you knew if this Artillery was in battle? ore does it have never seen the Battlefield? best regards Frank
Posted on: 8/19/2012 5:37 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11198514

RE: Any interest in a 1/16 Churchill tank ?
i want one too ;)
Posted on: 7/29/2012 4:51 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11173082

RE: dimensions of Tamiya Pershing Wheels?
THX Mal this helps alot, just a little Question, the metal wheels who you bought, is it possible to use them with ball bearings? best regards
Posted on: 7/4/2012 2:53 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11142273

RE: dimensions of Tamiya Pershing Wheels?
no one?
Posted on: 7/3/2012 10:27 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11141407

dimensions of Tamiya Pershing Wheels?
Hi guys, for my conversion of the su-100y i need to know, how the dimensions (width and diameter) of the Tamiya Pershing are, and is there a seperate rubber? and eventually if they would fit on the Asiatam KV Metal swing arms? Best regards Frank
Posted on: 7/2/2012 10:48 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11139965

RE: SU-100Y need Help with Road Wheels -.-
damn you are right ;) i asked google, if i would use the KV Tracks and sprockets idler wheels, the idler would be 42,5mm on the second pic above you can see that the road wheels have nearly the same dimension as the idler, and i have measured the road wheels from a Pershing from Heng Long, they have a diameter of 42mm, google says the tamiya idler wheels have 42mm too.
Posted on: 6/26/2012 9:52 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11132471

RE: SU-100Y need Help with Road Wheels -.-
hey guys, i know i am it again, but waht would you think abaout the Pershing road wheels? best regards
Posted on: 6/26/2012 9:11 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11132435

RE: SU-100Y need Help with Road Wheels -.-
so guys, i searched and now a better pic ;)
Posted on: 6/26/2012 9:01 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11132428

RE: SU-100Y need Help with Road Wheels -.-
Thx Guys, Panther G, you mean the Panzer 4 wheels would fit too ore? And if yes guys, soon the next Question ^^ does anybody of you knew where i could geht the rubber tyres for them? Best regards
Posted on: 6/26/2012 8:39 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11132396

RE: SU-100Y need Help with Road Wheels -.-
np Hal ;) so guys come on, what would YOU do to fit in the road wheels, unfortunately i have no idea -.- best regards
Posted on: 6/26/2012 8:25 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11132379

SU-100Y need Help with Road Wheels -.-
Hi guys, I am it again, with again a very stupid Idea ;) This winter i want to build up something special ;) after asking google, and the Website from kubinka i found this Beauty ;) The upper and lower hull would be not really a Problem Blue Prints and CAD are good enough ;) The Tracks and Sprockets would fit from the KV-1 but my biggest problem is, what Road Wheels would fit in? Best regards Frank
Posted on: 6/26/2012 12:17 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11132042

RE: PAK 38 in 1/16 or 1/18
No Problem Rex and thx to Karel
Posted on: 6/21/2012 10:52 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11126720

RE: PAK 38 in 1/16 or 1/18
Gnäh ^^ damn i have to look, it would be for this conversion: http://braillescalecomp.com/Participants/Panzer%20IV%20with%205cm%20Pak/454 Best regards
Posted on: 6/21/2012 1:10 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11126184

RE: PAK 38 in 1/16 or 1/18
thx rivet hm ok thx karel so what would you do? another question, what do you (all ^^) think, is the chassis of the pak 40 nearly the same with the pak 38 ? i mean ok the barrel is different, and the front shield but the rest would this maybe fit? Best regards
Posted on: 6/14/2012 12:03 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11118204

RE: PAK 38 in 1/16 or 1/18
Hoi Benny, i know that 21st century build an Pak 40 but i need a PAK 38 Best regards
Posted on: 6/14/2012 10:29 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11118100

PAK 38 in 1/16 or 1/18
Hi Guys, again i need your help ,) I am planning a conversion, but therefore i need a PAK 38 does anyone of you know if there is already a kit or diecast modell from it? i just find one in 1/6 from Draon and thats a little bit to big ;) best regards. frank
Posted on: 6/14/2012 7:54 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11117931

RE: DAK Hellcat
damn fucking good, did he made pictures or anything else during the build? damn i want one too ^^
Posted on: 6/11/2012 11:31 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11114547

RE: Road Wheels for German Lion? aka Löwe
Jop like this ;)
Posted on: 5/1/2012 11:51 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11064224

Road Wheels for German Lion? aka Löwe
Hi There, i am just thinking of building an Lion or in German Löwe in 1:16 but i dont know what Tracks, Wheels and Sprockets would fit, guys what would you think? I Think Kingtiger lower parts would fit: http://img140.imageshack.us/img140/1107/tiger3porscheadlerkruppa6br.jpg i mean the right tank. http://www.google.de/imgres?imgurl=http://strangevehicles.greyfalcon.us/Picturesc/lowe10.jpg&imgrefurl=http://strangevehicles.greyfalcon.us/PANZERKAMPFWAGEN%2520VII%2520LOWE.htm&h=488&w=752&sz=54&tbnid=WCDQ4mv5V_G1yM:&tbnh=90&tbnw=139&prev=/search%3Fq%3Dl%25C3%25B6we%2Btank%26tbm%3Disch%26tbo%3Du&zoom=1&q=l%C3%B6we+tank&docid=HG4NIcZAk8dFyM&hl=de&sa=X&ei=vCOgT_77M-Xa4QSOguHqAg&ved=0CDsQ9QEwAw&dur=689 and here the lower 3d render in grey I hope you can help me guys Best regards Frank
Posted on: 5/1/2012 10:57 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11064179

RE: Hooben Sprockets on HengLong Gears?
Hehe i know ;) but the Asiatam Tiger (P) is too expensive for me -.- and i already hve the sprockets, plastik track etc... from the Hooben Elefant Best regards Frank
Posted on: 4/16/2012 8:40 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11044119

Hooben Sprockets on HengLong Gears?
Hi guys, i am plannung a Tiger (P) from Ludwigs Hobbystore... but now i am thinking, i planned to use Heng Long/Asiatam Gears but i dont know will hey fit or have i convert them? Best regards Frank
Posted on: 4/16/2012 8:09 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11044074

RE: M41 to M18 Hellcat ??
Awesome rex how did you do that? is there anywhere an build thread or anything else? especially from the upper+ turret Best regards Frank
Posted on: 4/8/2012 3:04 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11033455

RE: BMD-4,T-64A and ATS-59 1:8 scale
Hi there, just one silly question ,) would it be possible that you would produce one or two tanks in 1:16 ? best regards
Posted on: 4/8/2012 12:21 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11033313

RE: M41 to M18 Hellcat ??
Thx Guys ;) and especially pat tanke for this Link ;) Best regards ;)
Posted on: 4/8/2012 12:10 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11033301

M41 to M18 Hellcat ??
Hi Guys, i am just thinking ;) yesterday i looked for an m18 hellcat and i looked at an m41, what do you think would this work? i mean the lower hull as an self construction, using the wheels from the m41 but sprocket and track vrom the new mato sherman i know, much scratchbuilding but i think it would work or what would you say? or better do you know anyone who has already done an m18 hellcat? best regards Frank
Posted on: 4/8/2012 11:05 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11033217

RE: Does the 21st Century 75mm Turret fit on the Tamiya Hull?
hehe thanks edouble my problem is i havent one yet but in ebay one stands at 1€ till sunday evening. i think i have to write nick an email about that damn mantlet -.-. best regards
Posted on: 2/5/2011 1:24 PM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=10314852

RE: Does the 21st Century 75mm Turret fit on the Tamiya Hull?
Thx Ross that Helps, and now i see thats its too small damn it -.- thx alot Ross and thx all the others who said its to small ^^ Best Regards
Posted on: 2/5/2011 11:42 AM by Author "Silk789" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=10314622