|
RE: RCM plans service sucks
hell, I remember reeds and 50 pound transmitters!!
Posted on: 8/14/2012 3:41 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11193541
RE: Need Rear exhaust Rossi
Thanks anyway. I prefer a new engine.
Posted on: 8/14/2012 3:39 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11193540
RCM plans service sucks
RCM Plan service is pitiful. It's been over a month and no plans!!! They sure took my money right away!!
Posted on: 8/14/2012 8:34 AM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11193025
RE: Need Rear exhaust Rossi
[:D]Thanks, I'll be able to get one now.
Posted on: 8/11/2012 8:30 AM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11189289
RE: Need Rear exhaust Rossi
That will work. You got one?
Posted on: 8/10/2012 6:00 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11188791
Need Rear exhaust Rossi
I was not aware that rear exhaust Rossi engines are out of production. If anyone has a good running , clean Rossi .60 with rear exhaust I am interested in buying one for a BPA project. Thanks[:D]
Posted on: 8/10/2012 10:31 AM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11188299
RE: Best Aerobatic / 3D ARF for 50cc size gasser
[:D] I just bought a Yak 54 from Chief at the Joe Nall event. It's a beautiful plane and the price was right. Skip
Posted on: 5/13/2012 9:05 AM by Author "Skip"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11079112
Best 3D plane for a Saito 1.80
[:D] Got a great running Saito 180 just sitting on the shelf. It needs a good ,fun, 3D plane to go with it. Any suggestions??
Posted on: 1/7/2012 8:50 AM by Author "Skip"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10896260
GY520 Red light or blue light for AVCS?
The GY 520 gyro shows a solid blue or red light to indicate either AVCS mode or Rate mode. The manual however, has a problem. On page 3 the manual says a solid blue light indicates AVCS mode and a solid red light is Rate mode. On page 11 the manual says the opposite. A solid red light indicates AVCS mode and solid blue for Rate mode. Which page is right? (When I get home I can check by how the tail responds)
Posted on: 9/24/2011 1:03 PM by Author "Jack Skip"
in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=10732137
RE: U-boats antennas
. Skip Asay
Posted on: 3/7/2011 6:57 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10385709
RE: VIIC, one or two periscopes?
Actually, I'm wrong. I should have included the Type I, of which only 2 were built - U-25 and U-26. Skip Asay
Posted on: 2/16/2011 2:34 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10341052
RE: VIIC, one or two periscopes?
"So the VIIC/41 came with one periscope?" ALL WWII German Uboats from Type II on up had 2 scopes; 1 "attack" (smaller head) and 1 "sky" search (larger head). Skip Asay
Posted on: 2/14/2011 1:47 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10335956
RE: help needed please forward dive planes
Well, if you're willing to deviate from scale, I would do as Dave Merriman did with the 1/72 Revell fleet boat. Just how it's operated is your call but, personally, I would use a servo. Skip Asay
Posted on: 2/14/2011 11:49 AM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10335731
RE: help needed please forward dive planes
. Skip Asay
Posted on: 2/13/2011 7:06 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10334179
RE: Lets hear about your Thunder Tiger Neptune SB-1.
great!" Skip Asay
Posted on: 1/19/2011 1:51 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10274502
RE: Lets hear about your Thunder Tiger Neptune SB-1.
, have the boat moving forward, and turn on your thruster. And do a video. Skip Asay
Posted on: 1/19/2011 10:57 AM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10274199
RE: Lets hear about your Thunder Tiger Neptune SB-1.
. I've been there, done that, and have the T shirt to prove it. Skip Asay
Posted on: 1/19/2011 9:15 AM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10274003
RE: Lets hear about your Thunder Tiger Neptune SB-1.
. Period. End of story. In reverse, however, bow thrusters work like gang busters. Skip Asay
Posted on: 1/18/2011 9:38 AM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10271913
RE: Lets hear about your Thunder Tiger Neptune SB-1.
Since the possibility always exists that you may have a need for that panning ability while underway, put the thruster in the stern. 'Tis better to have and not need rather than need and not have. Skip Asay
Posted on: 1/18/2011 8:40 AM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10271813
RE: Purchase from RCU Member with no History?
Vince, Although this person might be an upright, honest seller, I would be hesistant to buy. Getting a PayPal account protects both parties. Skip
Posted on: 1/14/2011 3:22 AM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10262240
RE: Lets hear about your Thunder Tiger Neptune SB-1.
for docking purposes. Skip Asay
Posted on: 1/9/2011 1:55 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10250894
RE: Lets hear about your Thunder Tiger Neptune SB-1.
While using a bow thruster to enable camera panning can be considered a good thing, it should be pointed out that a bow thruster WILL NOT enable a moving vessel to turn better. To enable that, the thruster should be mounted in the stern. Bow thrusters will certainly cause a vessel to turn while stationary or moving astern but not while moving ahead. Skip Asay
Posted on: 1/8/2011 2:34 PM by Author "Skip Asay"
in the forum "RC Submarines"
http://www.rcuniverse.com/forum/fb.asp?m=10248644
RE: Holy smoke - old Graupner Caravelle kit skyhigh...
[X(]I guess someone has still got too much money! I was under the impression that Graupner( Via Hobby Lobby) had that plane for sale as an ARF not too long ago.
Posted on: 12/6/2010 11:28 AM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10180413
Great Service from Horizon
[:D][:D] I recently sent my 9303 to Horizon for a problem. They fixed it quickly and returned it with a surprise replacement for free. Thanks Horizon for your customer support!!
Posted on: 11/6/2010 6:41 AM by Author "Skip"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10118350
JR 9303 problem
I have a 9303 Transmitter that I operated with 53.5 module and 649 receiver for years without any problems. To modernize my fleet I switched to the Spectrum add-on and AR 7000 receiver. Two crashes with two separate receivers !!. All batteries were fully charged and system bound with steady lights. I am wondering if there is a systemic problem with this system. These losses are getting expensive.
Posted on: 10/23/2010 5:32 PM by Author "Skip"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=10089011
RE: H-9 Phoenix 7 build note! mis-print!!
[:@]This guy has pissed me off too!! Skip
Posted on: 10/19/2010 6:15 AM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10078265
RE: Phoenix 7 Nose heavy
[:D]I replaced the heavy engine with the evolution 60. Now it is only slightly nose heavy. None the less, it flew like it was on rails.
Posted on: 10/10/2010 3:12 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10059769
RE: Phoenix 7 Nose heavy
[:D]My friend and "test pilot" along with myself used our experience to ascertain that the plane would fly just fine. We knew it was nose heavy but not TAIL heavy which would lead to disaster. Enough already!!
Posted on: 10/6/2010 7:47 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10052490
RE: Phoenix 7 Nose heavy
[:D]I have always had this friend test fly my planes because his vision and reflexes are better than mine. I'm 65 years old and he is better than me. Thats why!! I hope that explains my logic. No time for egos to interfere with good sense. The c/g was within tolerance for the flight. Skip
Posted on: 10/6/2010 6:23 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10052333
RE: Phoenix 7 Nose heavy
[: Well I had a really good pilot test fly my plane with an extremely nose heavy C/G. The plane flew surprisingly well but not good enough for precision aerobatics. That engine is a real stump puller!! I am going to install the Evo 60 NX to solve most of the problem. then start adding the lead! [:@]
Posted on: 10/6/2010 3:23 PM by Author "Skip"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10051934
| 
