RE: O.S. GF40 4st gas
Mark, you say this engine runs smooth, without much vibration I take, what about the throttle responce? Does it have a linear throttle ? Or the typical walbro on/off switch?
Posted on: 5/24/2013 1:51 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11521740

RE: O.S. GF40 4st gas
Hey, I figure one good engine is worth at least two China ones.....Right
Posted on: 5/21/2013 7:43 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11518817

RE: O.S. GF40 4st gas
Mark, Outstanding! Very glad to hear of great running qualities for this new four stroke, any chance for a vid?
Posted on: 5/21/2013 1:54 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11518520

RE: ESM F6F Hellcat Info?
I'm looking at the Twin 40cc RCGF, Hey Bob, ValleyView is selling there own brand twin 40, might want to check it out. http://www.valleyviewrc.com/estore/vvrc-40cc-gas-engine.html Slanted plugs to help with the width, Yes, I Want One!
Posted on: 5/19/2013 5:29 PM by Author "SkyPilot101" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11516477

RE: O.S. GF40 4st gas
I'm hoping this engine works out great, with no fiddley attributes. also want to pick one up! Keep us informed
Posted on: 5/15/2013 8:32 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11512780

RE: O.S. GF40 4st gas
When do you propose to have it running?
Posted on: 5/15/2013 4:33 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11512587

RE: Balsa USA 1/4 Scale Nieuport 28 Build
Glad to see your back at it SDP! I really want a BUSA 1/4 scale as my first build of this size this coming winter, your keeping me inspired.
Posted on: 9/8/2012 3:38 PM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11222073

RE: av8tor1977
I recently purchased a 32cc Stihl Four Mix Four Stroke that av8tor converted for aircraft use. Robert dos excellent work on these conversion engines. This one required a carburetor modification, as set-up stock, they lean out on the top end. So not only is the engine converted, it’s also set-up to go right off the bat! I’ll tell you, this is going to be a perfect engine for a ¼ scale Balsa USA Newport or PUP. I’ve bench run it and it swings a Xoar 18/6 with authority! I need to pick up a new tack so no numers, but this one is ripp'in my 18/6, might even go 19!!! Robert was also very helpful in providing technical info on the engine itself, and the carb modifications required. He has my recommendation to anyone looking for a good engine. And BTW, his prices are very reasonable, Mike.
Posted on: 9/8/2012 3:08 PM by Author "SkyPilot101" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=11222050

RE: What happens if arf and kit building prices meet?
I always wonder what will happen when arf prices eventually climb up to the same level as building yourself ? Well, I'd like to think that when this happens, some bright, intelligent, young man of natural origin will realize that the price advantage the aisan manufactures had because of slave wages will have evaporated, and that it is actually profitable to manufacture ARF's in the good old USA. His ARF line will be superior because of his experience as a accomplished modeler himself. In short time his line of ARF's will burn down the competition from aisa, and his prices will actually fall due to increased demand and good business tactics. Who Is Going to Step Up to the Plate?
Posted on: 8/26/2012 8:48 AM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11206436

RE: OS GT22
Look's like it's a little taller than a DLE, just like the GT-33, wonder if it has a longer stroke, and what prop it will turn. Considering if you have to use a pitt's style muffler, add'ed to the cost of a DLE-20, it's pretty close in price couppled to Tower discounts......we'll see.
Posted on: 8/26/2012 6:23 AM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11206336

RE: Whats up with kits?
[quote]ORIGINAL: PatrickCurry Please don't turn this into a political discussion.  We have plenty of that everywhere else in our lives. [/quote] I identified the problem, and it's root cause, if you choose to ignore it then be Happy with the way things are!
Posted on: 8/25/2012 11:11 AM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11205619

RE: Whats up with kits?
I have noticed that as of late, there is a lot of complaining about the cost of our hobby increasing, now think about this for a second, please. Is it only the cost of our hobby, kit's, fuel, arf's, ect., or has EVERYTHING in general been increasing in cost, gas, food, utility's, construction material, pet supplies, & on and on. Haven't heard a peep from the News Media about inflation? So what is causing this? Well I'll spell it out for you: Our National Debt that is increasing by Trillions of dollars every year is directly related to the "worth" of the dollar bill in your pocket. No doom & gloom, Just Fact! So let's just keep on going in this direction and I bet you'll find out you wont have enough disposable income to enjoy this hobby in a few more years.....We can change this in November.....But only if we decide to get off our butt's and go out and VOTE! Nov. 15 is your day to speak!
Posted on: 8/25/2012 8:23 AM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11205468

RE: Which Balsa USA 1/4 plane?
Guy's, From what I've read, BUSA's WW-I 1/4 scale fleet will usually need around a pound or more of nose weight to C/G, the reason I'm bringing this up is that I recently aquired a 32cc converted Shihl 4 stroke engine, it's about as strong as a Zen-26, maybe a little more, turning a 18/6 around 7500 rpm, but weighs 4 lbs. I'm thinking that it's a perfect fit for a PUP or Newport, Any comments on the weight & power would be helpfull.
Posted on: 8/25/2012 5:34 AM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11205292

RE: Larger Revolver
DBL Post
Posted on: 8/25/2012 3:57 AM by Author "SkyPilot101" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11202858

RE: Larger Revolver
Maybe.....Our rising National Debt has driven the Value of our Dollar Down.....Not just ARF's everything has gone up
Posted on: 8/23/2012 2:18 AM by Author "SkyPilot101" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11203033

RE: Balsa USA 1/4 Scale Nieuport 28 Build
Cool pic's from the Museum of Flight! Shame to think of the Skill & Craftsmanship of yesteryear are all but gone in todays disposable society. (looked at furnature lately) Any news on the rear stringers ?
Posted on: 8/18/2012 7:10 PM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11198257

RE: Hangar 9 Fokker DVII
http://www.troybuiltmodels.com/items/ECOMFOKDVII-70AAF.html Have any of you guy's considered the ECOM DVII ? 70 inch span, 25 - 30 cc gas power recommended, 14 lbs. I've been eye ball'in this one but just havent been able to pull the trigger yet!
Posted on: 8/18/2012 4:32 PM by Author "SkyPilot101" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11198147

RE: Balsa USA 1/4 Scale Nieuport 28 Build
I know its common to sing our praises to SDP, But this time NuckleButt has done a outstanding job on the Pilot & Gun [:D] As you said SDP, Time to step things up in the cockpit!
Posted on: 8/5/2012 9:29 AM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11181621

RE: Stuck Choke
Oil that sucker up! Two stroke oil is fine.
Posted on: 8/3/2012 7:03 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11180236

RE: fuji 24
50/1 seams pretty lean for break in, are you shure? To be safe I'd use Penzoil air coled two stroke Non-Synthetic @ 32/1 for at least a gallon, then switch to the 40/1 synthetic. No experience here with Fuji engines, but if they spec 50/1, you will probably be OK with that on a easy flying PUP. Stihl Ultra is also a highly rated synthetic oil
Posted on: 8/3/2012 1:17 PM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11179884

RE: Stuck Choke
Sounds like you over heated it. Wet the shaft with premix were it passes through the carb body, followed by a few drops of oil and gently work it free.
Posted on: 8/3/2012 3:00 AM by Author "SkyPilot101" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11179374

RE: ECOMRC TigerMoth 1/4 Scale
By the looks of the fusalage, it is put together very light, aka 3D slyle construction. What are you guy's opinion on the strength of the structure, especially the landing gear plate? I have been eyeing the ECOM Fokker DVII, but beside this thread, very little information exists on this manufacturer.
Posted on: 8/2/2012 5:56 PM by Author "SkyPilot101" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11179090

RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
SDP, Kudo's to your decision to save your Cub, the damage does seem light afterall. One possable good thing that may transpire is that you will use a honest to goodness ENGINE in the SportCub, DA-50 is recommended, I believe. So you will be going GAS with this one, right........RIGHT?
Posted on: 7/29/2012 7:40 PM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11173960

RE: Balsa USA 1/4 Scale Nieuport 28 Build
I too am following with intrest! SDP, no up-dates in a few day's, I'm having to resort to scowering the build threads on ScaleBuilder.
Posted on: 7/29/2012 10:21 AM by Author "SkyPilot101" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11173353

RE: gas/glow conversion fuel mix question.
Gas/Glow seems interesting, what would you say to this blend: 1 Qt. 20/20 glow, 1.15 Qt E-85, and 0.85 Qt gasoline? Did I get the ratio correct? E-85 is available at one location in my area.
Posted on: 7/24/2012 6:57 PM by Author "SkyPilot101" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=11168013

RE: Hangar 9 1/4 Scale Piper Cub ARF???
NICE, 88! One Question, Mfg-Weight-Price?
Posted on: 7/21/2012 4:11 AM by Author "SkyPilot101" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11163304

RE: *Hangar 9 New Pulse 125*
Keep in mind that H9 C/G as shown in there manuals is a bit conservitive, I wouldent worry too much about getting it dead on, half inch is close enough, of course, don't go too far aft! And NO up trim at all on maiden!
Posted on: 7/13/2012 4:57 PM by Author "SkyPilot101" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11154306

RE: Balsa USA Stearman - She flies great!
Nice fly'in Stearman Kevin, thank's for posting the vid, No fly'in for me this weekend!
Posted on: 7/8/2012 3:07 PM by Author "SkyPilot101" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11147841

RE: AMR High Wing Stick 30
Luck was with you today! In your pick of the engine, you can see that all four bolts are sheared off and still in the stand-off's, If your prop delaminated, the resulting vibration must have been tremendous to do that. Any chance you cliped the prop on your takeoff run? Glad to see your Stick came home in one piece after that. Opp's On second look, is that sheared off bolts in the stand-off's or Mud!
Posted on: 7/8/2012 2:56 PM by Author "SkyPilot101" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11147825

RE: Cub tires coming off hub (Hangar-9)
R/C car specific products, there used to be a ca that was fortified with rubber thats purpose was to glue car tired to rims, it is black in color, might look into that. If it works on car rims which are plastic, it should be safe for Cub rims. Me, I just ca'ed them on, how long do you want to keep the stock rims anyway.
Posted on: 7/3/2012 10:41 AM by Author "SkyPilot101" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11141428