RE: waco ymf
Procter Enterprises sells a Peter Barth designed Waco YMF5 in 25% They used to sell Barth's 33% kit as well. AMR has 33% and 40% Both are Lazar cut kits. Very easy to build . They are not as scale as Barth's kits are but very nice kits. If you want to build and have a model that is very very scale do the Barth Kit in 25%. Big but not GIANT as are either of the 33% kits are. I built the bigger Barth kit and it fly so well. Lot of work to build but I like building better than flying anyhow. I think GreatPlanes has a ARF of the YMF5 out now. Not sure of the size but it is smaller than 25% I think. It looks O.K. for and ARF but if you want any ARF then don't expect it to be very scale. None are. They just kinda look like the full scale planes. Remember ARF's are cheap to construct, quick to assemble. There designed for those who don't want to build. Instant gratification and no skills involved to assemble one ( you don't build an ARF) but they do fly O.K. they really do.
Posted on: 3/6/2011 9:05 AM by Author "SoCalSal" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10382266

RE: removing ultracote adhesive
[quote]ORIGINAL: jlrskymaster i was adding some ultracote - over ultracote - and after i applied it i determined i did not like the look. So, I applied heat again and pulled the trim off. Adhesive was left behind. What do I use to remove the adhesive? [/quote]MEK will take adhesive and any color off the wood. Don't get it on any plastic as it will mar the finish if you try to wipe it off and eat into it if you leave it on.
Posted on: 2/15/2011 6:16 AM by Author "SoCalSal" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=10337466

RE: Piper j3 cub Covering.
[quote]ORIGINAL: Chip_Mull [quote]Hi Everyone. I am building a Greatplanes Piper J-3 Cub with the full size 75 inch wingspan. My problem is whether to cover the Plane in Mono-coat or Coverite Fabric. I believe the Originals were covered in fabric and I am trying to keep it as close to the Original version as possible. What would be better as for up keep, weight and strength. I am putting in a OS 72 4 stroke with the on-board glow starter. Any suggestions and also if I use the fabric does it need to be sealed.[/quote] Then why not try http://www.stits.com ? You can't get more realistic. Plus the paints are the very same used for full scale. [/quote] I second this.. I use only this system on all my fabric planes. After 19 years of being covered in this stuff my J-3 has not one single wrinkle in it's covering.
Posted on: 2/15/2011 6:05 AM by Author "SoCalSal" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10337445

RE: Bud Nosen Mr Mulligan kit...
There is a kit listed on e_bay right now. It was listed yesterday 02/14/2011
Posted on: 2/15/2011 6:00 AM by Author "SoCalSal" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10337438

RE: Who makes the best quality kit these days?
If you like wwI type aircraft then hands down the Proctor and GTM kits are the best. But you had better be ready not to cover Proctor's stuff as they are so beautiful in the bare bones state. You'll pay more for either one of these kits but you really get what you pay for.
Posted on: 12/14/2010 4:38 AM by Author "SoCalSal" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10196013

RE: What's Going On With RCU Marketplace
[quote]ORIGINAL: MinnFlyer [color=#3333CC]RCU was moved to a new set of servers and there were some bugs in the process. The marketplace will be up as soon as they can work out the kinks[/color] [/quote]MinnFlyer... Your answer is to simple[:D][:D] How did you figure that one out?. Ya Think.... makes too much sence..this is just going to cause a major group of people more confusion.[X(][X(][X(]
Posted on: 12/6/2010 9:05 AM by Author "SoCalSal" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10180132

RE: BUY & SELL NOT WORKING
[quote]ORIGINAL: Dash7ATP I had made several offers prior to Buy & Sell going down. I'd sure like to know if one of them has been accepted. Maybe I'll find out when the site is up [/color] Yup I think you have the answer here. [/quote]
Posted on: 12/6/2010 9:00 AM by Author "SoCalSal" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10180117

RE: BUY & SELL NOT WORKING
To all who have adds and think they won't get some kind of extended run time because the site is down well??? quit whining!! They are having a problem with the new server.... When they get it fixed then we will see the site up again that simple. To those who have adds you will still have adds, for those who want to buy, you will be able to do that. RCU is not going to come back up and then tell those who have adds that they have to pay more to run the add again, they will extend the add for the same amount of time you were off-line due to their problems with this server. To those of you who have "offers" on these adds you will still have those as the people who placed the offers can't see if you accepted them or not. In fact they can't place an offer if the site is down. The world will be better soon trust me. Relax .... go build or fly a model????? geezzzz that is a novel idea. I think I will go build on one....I can't l waste my time looking over the market place adds for stuff I can't afford anyhow. So now I can either work on a project I have in front of me or watch dancing with the stars????? Hummmmmmm That is such a bogus show I'm headed to the shop. Have fun boys...[:D][:D][:D][:D][:D][/size][size=7][/size][/size][color=#3300FF][/color]
Posted on: 12/6/2010 8:54 AM by Author "SoCalSal" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10180101

RE: Classifieds down?
[quote]ORIGINAL: marksextra Ok. Thanks man. At least I know it's not my computer or something. I've looked around and it seems no one has mentioned it. [/quote] Ditto for me as well
Posted on: 12/5/2010 6:54 AM by Author "SoCalSal" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10177218

RCU market place
Is it just me or others having problems getting the market place to pull up? I have tried three different browsers and get the same thing....This page unavailable at this time. This is going on the 3 day. Any answers to this or advice as to what is going on?. [color=#990033]Never mind...I saw the previous post on this subject[/color][size=7][/size]
Posted on: 12/5/2010 6:49 AM by Author "SoCalSal" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10177213

Futaba Flyers Club Question
Hi, Just tried to log into this site. But it is giving me problems. I need to re-set my password but when I list my e-mail address it states it doesn't match the one you have on file. ????? I only have one address. So now I would like to reregister but forgot how. Thanks Sincerely Steve P.S. I have a 12Fg
Posted on: 11/8/2010 12:35 PM by Author "SoCalSal" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=10122691

RE: Waco Decision made! More help needed please.
Hi, I have built the Barth Waco 1/3 scale. In my opine the Barth is much more a builders kit then the Genesis. The Genesis kit is a very very good kit by all means. It is much easier to construct than the Barth. The Barth kit is more scale in it's design than the Genesis. So now I will focus on what I know, the Barth kit. First of all it is a very good kit as far as the materials go. The ailerons are all pre-made for you with the corrugated surfaces built in. The fiberglass cowl is a work of art in it self. Much detail on it that would be super time consuming to try to replicate. All fiberglass parts are of the highest quality as is the rest of the parts. It comes with all the turnbuckles and high quality rigging wire need to finish the kit. The tailwheel bracket is just a great piece of work and a real time saver for the builder. My only sore point of the kit is the landing gear...it is a bit of a job to get right and takes a lot of time to finish up correctly. All the hardware ( screws, bolts nuts are furnished in the kit .) and again are top rate parts. I first flew mine with a RCS 215 radial engine. Not much to say other than it is a very very costly engine to get. But power is off the charts for this plane. Easy to start and runs real good. It is a heavy engine but that does not affect the model at all. And nothing sounds as good as this engine. I am now going to re-place the engine with a 120cc 3W that I have. this should lighten up the plane by about 6 pounds and that just means a better flying model. I sold the RCS due to money needs and I wish I had not but it is what it is. The kit is designed for a 120cc and up engine. Anything in that size and up will fly her with no concerns as to power...2 strokes in this size produce as much and more power than the RCS 215 and are a very good choice if you don't want to dump $3500 for the big radials. Overall the size of the two molds is about the same. I see in your post that you think they are different, well Genesis has a 40% and a 33% and Barth has a 33% and a 25% so make sure you are looking at the correct sizes when comparing If you are going to scale out either of the kits I think the Barth would be a little better choice but both can be done up really good if you take the time. The cost is about the same the last time I looked so it is just a matter of what you like. Peter Barth the designer is a Rc pilot as well as a engineer working on the Eurofighter project. He will answer most any question for you via e-mail. The only thing to remember is he is always traveling between Germany and Spain so he is sometimes a bit late in answering e-mails but he does do it. His english is pretty good much better than my German I'll tell you. Anyhow if you get this kit and have any questions let me know. Now if there is somebody out there that can help you out with a more detailed observation of the Genesis kit you will be on your way. Have fun in your build!!! and remember...nothing looks better than a Waco and either of these kits fly just great.
Posted on: 10/31/2010 1:34 PM by Author "SoCalSal" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10106508

RE: STOP with the oil ratio threads, please.
[quote]ORIGINAL: fireman7875 So I was wondering... I have a DA 50 that is brand new. What oil ratio should I use for break in? Then, what should I use after break in. Then, [color=#3300FF]what should I use when it has about 1000 hours on it?[[/color]:D] Sure, the same threads get old but let's face it, RCU's search bar sucks. So if you don't want to read yet another thread about oil ratios, do what I do: go to the next thread. Works every time. Brian [/quote]I wouldn't worry about the oil ratio at a 1000 hours....It will not run that long[:D][:D][:D]
Posted on: 10/28/2010 9:08 PM by Author "SoCalSal" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10101089

RE: MOKI RADIAL Care and Maintenence
[quote]ORIGINAL: TheRickster Ran the 215 somemore on the bench.. I ran it about 5 minutes at mid throttle then opened it WOT and it tached 4800rpm still a little on the rich side with a Bolly 32X14.. It idles very nicely at 700 or so and all the plugs are burning a dark tan color so far.. [color=#3300CC]I am thinking about trying to find out what the tubing fitting size[/color] is and just running 5 straight pipes on it like the real Gee Bee was.. I bet it would sound great as well.. [IMG]http://i498.photobucket.com/albums/rr347/RHallenbeck/GeeBeeFront.jpg[/IMG] [/quote] Exhaust tubing is 20mm outside diameter. That is the two down outlets from collector ring
Posted on: 9/8/2010 9:50 AM by Author "SoCalSal" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9988108

RE: Top Flite Cessna 182 Skylane Build
If you want to try covering with solartex and then filling it with a good high build primer. You have to make sure you have it sanded as smooth as your talent will allow. Then fill the grain with a good filler sanding between coats as you go. Yes all you nay sayers out there it does take more time but it won't look like that phony Monocoate gloss that every other model looks like. Have a friend that used this method on a Hostetler Cessna 195 and it is just beautiful. Whatever you do take your time and build as good as you know how to. This is one of the best parts of this hobby..building not a ARF that any 8 year old can do but building a model that you have pride in and no one else can say "I have the same thing" Yes building takes time to do a good job. But you sound like the type of person who takes pride in what they do. Don't be afraid to build this kit...it really is a piece of cake and a good choice for your first build and scale project. You will learn a lot that will carry over to your future builds. Have fun!!! Oh and it is simple to fly!! If you can handle any plane with ailerons then you can fly this with ease
Posted on: 9/7/2010 3:18 PM by Author "SoCalSal" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9986382

RE: 87
You might post this question in the giant scale #d forum to get some replies.
Posted on: 7/14/2010 11:37 AM by Author "SoCalSal" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=9864469

RE: New builder mistakes
Just take your time that's all there is to it. Walk away when you get tired or frustrated.
Posted on: 7/9/2010 11:46 AM by Author "SoCalSal" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9854091

New update from Ikurus
Hi, got a e-mail today informing me that there is a new update for the Mac version. Soooooo I fallow the links to the download page and sure enough there it is just like they said. But when I click "download" from the correct list for the Mac it says it can't find the page. I have tried this with Explorer, Safari.and Firefox, all the same results. Maybe you can try and if there is a problem let Ikrus know of it. Thanks Steve
Posted on: 7/9/2010 11:40 AM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9854075

RE: Where to find 2.4GHz Pitts RTF
If you don't like the radio in the plane as it comes then just replace it with your choice of systems. I know cost is a concern but it may be the only way to get what your after. Or maybe it is time for you to try a build of a Pitts kit. Not as hard as it might seem and great way to learn about the construction of RC aircraft
Posted on: 7/2/2010 12:46 PM by Author "SoCalSal" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=9840602

RE: Buiding pics Waco YMF-5 Barth Modellbau
Very very nice. !!!!! Great fun this one is. Nice flying!! [:D][:D][:D]
Posted on: 6/29/2010 10:14 AM by Author "SoCalSal" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9833924

RE: Is kitcutter.com a ripoff?
[quote]ORIGINAL: reggeee [quote]ORIGINAL: SoCalSal [quote]ORIGINAL: reggeee [size=5][/size][b][/b] I just went through the kit quickly. It appears to be A: all there and B: a decent job. I say decent cautiously because the paper plans are still glued to the pieces and I can see that some of the parts are sanded right up to the part drawing line and some are sanded into the line. some are sanded
Posted on: 6/16/2010 11:28 AM by Author "SoCalSal" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9806779

RE: Is kitcutter.com a ripoff?
[quote]ORIGINAL: reggeee [size=5][/size][b][/b] I just went through the kit quickly. It appears to be A: all there and B: a decent job. I say decent cautiously because the paper plans are still glued to the pieces and I can see that some of the parts are sanded right up to the part drawing line and some are sanded into the line. some are sanded pretty square and some are sanded with a slight radius. I guess the only true square would be Laser cutting. Anyway, It's all there (i think. won't know until i start really and do an inventory). So to summarize: I got my kit. It's all there. (for now) and It appears I got what i paid for. My campaign of terror is over. I will however serve in someone else's army. [/quote]Hey..that paper on the cut parts is how he cuts the parts. If you just take a bit of time and look at it it will peel right off. He uses a very low tack cement to attach the prints to wood so that he has a guide to what to cut. I think you will find that he does a pretty good job of cutting the kits. I have had two kits cut by him and both are very good jobs. It took me about 90 days per kit to get them. I think that is not too bad a time frame. Cornell went out of his way to include extra wood and parts that I asked him to include at no extra charge. I have heard some of the folks on this thread really bad mouthing this guy and heard their side of the story. However I have not heard the other side's story so I won't make a judgement on this person based on only one side of the story. I'm sure you have heard a story about something and then heard the other side of same. It is funny how some details are left out by both sides. I have been building for about 35 years. I think I have more time building than some of you are old. Hand cut kits will never be "spot" on to the lines. But good enough to build with if you can build at all. Lazer kits are basically put part a to part b and so on. Cutting can be as good or bad as the drawing, the person inputting data to the cutter etc. Some folks who KNOW how to build will have no problems building either of these types of kits. Some will swear that die cutting is no good, that hand cutting is to sloppy, that lazer is the best way to go. It is all dependent on your skills as a builder to make something of the parts. If you take 10 of the same kits from a kit cutter and build them all yourself you will have ten different planes when you get done. No two planes are the same no matter how hard you try. Hope you enjoy the kit you got after the problems you have had. Building your own kit is one part of this hobby that you will enjoy I think. I know I do. Too those of you out there that have had no dealings with this guy should only read what is posted by the people that have and then think of what you have not heard from both sides. The story will always have something included/excluded to embellish it to the persons needs. On either side!! Here is a clue to how I order from Cornell... don't ever send him all the money up front, keep in touch with him at least every three weeks. And then don't send the balance till you have a tracking number from the shipper. Oh and don't change you order after he starts cutting..it will only delay your kit if he has to go backwards to re-do something you want changed. But this applies to most business I do on the net with private parties.
Posted on: 6/14/2010 12:24 PM by Author "SoCalSal" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9802126

RE: Everything Radial Engines
Here is a site in Holland. The guy makes a very good engine: http://www.brownbearmotors.nl/?page=engines
Posted on: 6/10/2010 12:55 PM by Author "SoCalSal" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9794162

RE: how to you ship a 46% airplane
$6%??? Why not just fly it there?? [:D][:D][:D][:D][:D]
Posted on: 6/9/2010 10:32 AM by Author "SoCalSal" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9791677

RE: What planes and helis would you like in Aerofly5?
Giant Aeromaster 25-33% Waco YMF5 T-28 25% Cessna 195 Stiison SR series 25% or larger Piper Pawnee
Posted on: 6/8/2010 11:59 AM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9789568

RE: Patch 1.11.7.31 Problems
Rajul It is the Mac version patch I downloaded.. I just tried it again and no go I also checked the previous download to make sure that it was the correct one and it is. I don't know if I really need this patch unless it must be installed before future patches might be needed. The sim runs just fine now. But I'm one of those people that if something is supposed to work and it doesn't then I would like to try to figure it out. Anyhow thank you so much for all your ideas and help past, present and future. You are one of the reasons I bought this sim. You always try to help every single request you get. Ikrus should be proud that they have a person such as you as their representative. The other flight sim people could learn a lesson from you on how to run a support site. Sincerely Steve
Posted on: 6/3/2010 9:47 AM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9778041

RE: Patch 1.11.7.31 Problems
Just a thought?? I used the adapter from my PC version on this Mac version. What I mean is I have a Futaba 12FG it has the square plug in back. I didn't find any adapters in the box that seemed to fit this transmitter so I just unplugged the one I have from donngel on the PC version and plugged it into the USB dongle cable on this Mac version. Perhaps that could be the problem??? However the program runs just fine with this adapter.
Posted on: 6/3/2010 9:37 AM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9778022

RE: Patch 1.11.7.31 Problems
Hi Mac version ... Installed from disk all went well. Tried to patch via a link from this site. But the link was to the AFPD site.. I do have Parallels installed on my Mac but I don't use it for this version...But I do have a PC version mounted on the Parallels side. Parallels is shut down during the running of AFPD, Come to think of it the PC side is just about never used anymore. Thanks steve
Posted on: 6/3/2010 9:14 AM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9777991

RE: Patch 1.11.7.31 Problems
Hi, the version number on the disk is 1.11.07.25
Posted on: 6/2/2010 3:21 PM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9776247

Patch 1.11.7.31 Problems
Hi, just installed AFPD 5 Platinum on my iMac, everything went great. Now I see the above patch is available. So I download it and try to install but for what ever reason I get a "crash Log" screen and it won't install. Is this patch really needed??? Thanks Steve Model Name: iMac Model Identifier: iMac10,1 Processor Name: Intel Core 2 DuoThanks Processor Speed: 3.06 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Bus Speed: 1.07 GHz Boot ROM Version: IM101.00CC.B00ATI Radeon HD 4670: Chipset Model: ATI Radeon HD 4670 Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9488 Revision ID: 0x0000 ROM Revision: 113-B8030C-253 EFI Driver Version: 01.00.367 Displays: iMac: Resolution: 1920 x 1080 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Display Connector: Status: No Display Connected SMC Version (system): 1.52f9 Serial Number (system): YD0041GPB9U Hardware UUID: 4D5DB687-256A-53E0-8C0E-CCD6E64C4985 If you need anymore info let me know. OPPS Forgot this.......... Process: AeroFly [2405] Path: /Users/stevel568/Desktop/AeroFly.app/Contents/MacOS/AeroFly Identifier: aerofly.com. AeroFly Professional Deluxe Version: AeroFly Professional Deluxe Version 1.11.07.29 (1.0) Code Type: X86 (Native) Parent Process: launchd [220] Date/Time: 2010-06-02 06:00:56.678 -0700 OS Version: Mac OS X 10.6.3 (10D573) Report Version: 6 Interval Since Last Report: 292646 sec Crashes Since Last Report: 15 Per-App Interval Since Last Report: 2 sec Per-App Crashes Since Last Report: 6 Anonymous UUID: 46DDE3D1-E0BA-480E-AD03-EBD8C265CDFC Exception Type: EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000000c Crashed Thread: 0 Dispatch queue: com.apple.main-thread Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 ...AeroFly Professional Deluxe 0x000be69d 0x1000 + 775837 1 ...AeroFly Professional Deluxe 0x000ba20d 0x1000 + 758285 2 ...AeroFly Professional Deluxe 0x00046b3b 0x1000 + 285499 3 ...AeroFly Professional Deluxe 0x0017549d 0x1000 + 1524893 4 ...AeroFly Professional Deluxe 0x0017565c 0x1000 + 1525340 5 ...AeroFly Professional Deluxe 0x000028a6 0x1000 + 6310 Thread 1: 0 libSystem.B.dylib 0x93d8ebd2 __workq_kernreturn + 10 1 libSystem.B.dylib 0x93d8f168 _pthread_wqthread + 941 2 libSystem.B.dylib 0x93d8ed86 start_wqthread + 30 Thread 2: Dispatch queue: com.apple.libdispatch-manager 0 libSystem.B.dylib 0x93d8fb42 kevent + 10 1 libSystem.B.dylib 0x93d9025c _dispatch_mgr_invoke + 215 2 libSystem.B.dylib 0x93d8f719 _dispatch_queue_invoke + 163 3 libSystem.B.dylib 0x93d8f4be _dispatch_worker_thread2 + 240 4 libSystem.B.dylib 0x93d8ef41 _pthread_wqthread + 390 5 libSystem.B.dylib 0x93d8ed86 start_wqthread + 30 Thread 3: 0 libSystem.B.dylib 0x93d6935a semaphore_timedwait_signal_trap + 10 1 libSystem.B.dylib 0x93d96ea1 _pthread_cond_wait + 1066 2 libSystem.B.dylib 0x93dc5a28 pthread_cond_timedwait_relative_np + 47 3 com.apple.audio.CoreAudio 0x904cb965 CAGuard::WaitFor(unsigned long long) + 219 4 com.apple.audio.CoreAudio 0x904ce997 CAGuard::WaitUntil(unsigned long long) + 289 5 com.apple.audio.CoreAudio 0x904cc294 HP_IOThread::WorkLoop() + 1892 6 com.apple.audio.CoreAudio 0x904cbb2b HP_IOThread::ThreadEntry(HP_IOThread*) + 17 7 com.apple.audio.CoreAudio 0x904cba42 CAPThread::Entry(CAPThread*) + 140 8 libSystem.B.dylib 0x93d96a19 _pthread_start + 345 9 libSystem.B.dylib 0x93d9689e thread_start + 34 Thread 0 crashed with X86 Thread State (32-bit): eax: 0x00000000 ebx: 0xbffffbe8 ecx: 0x07c00000 edx: 0x00000000 edi: 0x0880de00 esi: 0x08813a00 ebp: 0xbffff1f8 esp: 0xbffff1b0 ss: 0x0000001f efl: 0x00010286 eip: 0x000be69d cs: 0x00000017 ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037 cr2: 0x0000000c Binary Images: 0x1000 - 0x1a6ff7 +aerofly.com. AeroFly Professional Deluxe AeroFly Professional Deluxe Version 1.11.07.29 (1.0) /Users/stevel568/Desktop/AeroFly.app/Contents/MacOS/AeroFly 0x78d7000 - 0x78fffeb com.apple.audio.OpenAL 1.3 (1.3) /System/Library/Frameworks/OpenAL.framework/Versions/A/OpenAL 0x79a1000 - 0x79a5ff3 com.apple.audio.AudioIPCPlugIn 1.1.2 (1.1.2) /System/Library/Extensions/AudioIPCDriver.kext/Contents/Resources/AudioIPCPlugIn.bundle/Contents/MacOS/AudioIPCPlugIn 0x79aa000 - 0x79b0ffb com.apple.audio.AppleHDAHALPlugIn 1.8.4 (1.8.4fc3) <89AF8F46-15E4-2066-BDDB-05E92C1368D4> /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bundle/Contents/MacOS/AppleHDAHALPlugIn 0x79f3000 - 0x79f5ff3 com.apple.LiveType.component 2.1.4 (2.1.4) /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType 0x7e26000 - 0x7e8afe2 com.apple.LiveType.framework 2.1.4 (2.1.4) <7AABA687-4323-E5B9-BA04-8F61C217E6FD> /Library/Application Support/ProApps/SharedA/Frameworks/LiveType.framework/Versions/A/LiveType 0x7eaa000 - 0x7efffdf +com.DivXInc.DivXDecoder 6.8.3.5 (6.8.3.5) /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder 0x7f2d000 - 0x7f30ff3 +com.divx.divxtoolkit 1.0 (1.0) /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit 0x7f35000 - 0x7f7bffb com.apple.motion.component 1.0 (726) /Library/QuickTime/Motion.component/Contents/MacOS/Motion 0x7f81000 - 0x7f83ff7 Motion 726.0.0 (compatibility 1.0.0) <4377AE39-7E6B-D0E0-356E-6F3C92EBE405> /Library/Frameworks/Motion.framework/Versions/A/Motion 0x19000000 - 0x1909dff8 com.apple.procore.framework 4.0.2 (757) /Library/Application Support/ProApps/SharedA/Frameworks/ProCore.framework/Versions/A/ProCore 0x70000000 - 0x700caffb com.apple.audio.units.Components 1.6.1 (1.6.1) /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio 0x8fe00000 - 0x8fe41627 dyld 132.1 (???) <7E8A62A5-BB2D-C9C5-940D-B493DC9CD231> /usr/lib/dyld 0x90044000 - 0x901c6fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <96A45E03-2B29-83EB-0FC6-2C932E398722> /usr/lib/libicucore.A.dylib 0x901c7000 - 0x90429ff3 com.apple.security 6.1.1 (37594) <1AC07F75-7E27-9662-21DA-B05DFF047B26> /System/Library/Frameworks/Security.framework/Versions/A/Security 0x9049a000 - 0x9049aff7 com.apple.Accelerate.vecLib 3.6 (vecLib 3.6) <1DEC639C-173D-F808-DE0D-4070CC6F5BC7> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x904ab000 - 0x90525fef com.apple.audio.CoreAudio 3.2.2 (3.2.2) /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x9056d000 - 0x90615ffb com.apple.QD 3.35 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x90641000 - 0x906f1fe3 com.apple.QuickTimeImporters.component 7.6.6 (1729) <6C2372BA-69D9-E713-902F-95E16FD18EFD> /System/Library/QuickTime/QuickTimeImporters.component/Contents/MacOS/QuickTimeImporters 0x906f2000 - 0x906fcfe7 com.apple.audio.SoundManager 3.9.3 (3.9.3) <5F494955-7290-2D91-DA94-44B590191771> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound 0x906fd000 - 0x9071ffef com.apple.DirectoryService.Framework 3.6 (621.3) <05FFDBDB-F16B-8AC0-DB42-986965FCBD95> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x90720000 - 0x907bdfe3 com.apple.LaunchServices 362.1 (362.1) <885D8567-9E40-0105-20BC-42C7FF657583> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x907be000 - 0x907caff7 libkxld.dylib ??? (???) <13F26BB6-C2F7-9D74-933E-09AD8B509ECD> /usr/lib/system/libkxld.dylib 0x907cb000 - 0x90b32ff7 com.apple.QuartzCore 1.6.1 (227.18) <8A65F233-4C77-BA7C-5DDA-2423F5C1B7A1> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x90b3a000 - 0x90b7efe7 com.apple.Metadata 10.6.3 (507.8) <53BB360A-1813-170D-827F-C1863EF15537> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x90b7f000 - 0x90c49fef com.apple.CoreServices.OSServices 357 (357) <764872C3-AE30-7F54-494D-4BA3CE4F4DFB> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x90ee8000 - 0x90f96ff3 com.apple.ink.framework 1.3.3 (107) <57B54F6F-CE35-D546-C7EC-DBC5FDC79938> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x90f97000 - 0x90f97ff7 com.apple.vecLib 3.6 (vecLib 3.6) <7362077A-890F-3AEF-A8AB-22247B10E106> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib 0x91242000 - 0x913bbffb com.apple.CoreFoundation 6.6.1 (550.19) <1E97FB1E-9E42-B8EB-E463-5C75315FDA31> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x916bd000 - 0x91706fe7 libTIFF.dylib ??? (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x91707000 - 0x917c0fe7 libsqlite3.dylib 9.6.0 (compatibility 9.0.0) <16CEF8E8-8C9A-94CD-EF5D-05477844C005> /usr/lib/libsqlite3.dylib 0x917c1000 - 0x918b3ff7 libcrypto.0.9.8.dylib 0.9.8 (compatibility 0.9.8) <7482933B-4AF6-ED55-AD72-4FBD1E134958> /usr/lib/libcrypto.0.9.8.dylib 0x91b28000 - 0x91b92fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib 0x91ba9000 - 0x91badff7 IOSurface ??? (???) <4B825ADA-8DBE-6BA2-1AB3-307D2C3AFCA8> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface 0x91bb1000 - 0x91cb2fe7 libxml2.2.dylib 10.3.0 (compatibility 10.0.0) <89E648DC-E865-0AF4-5D4D-9562458FE939> /usr/lib/libxml2.2.dylib 0x91e22000 - 0x91e86ffb com.apple.htmlrendering 72 (1.1.4) <4D451A35-FAB6-1288-71F6-F24A4B6E2371> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x91e9a000 - 0x922b0ff7 libBLAS.dylib 219.0.0 (compatibility 1.0.0) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x92413000 - 0x92439fff com.apple.DictionaryServices 1.1.1 (1.1.1) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/DictionaryServices.framework/Versions/A/DictionaryServices 0x9243a000 - 0x92480ff7 libauto.dylib ??? (???) <9A2E444C-89BD-2902-C1E6-EC3E92544A25> /usr/lib/libauto.dylib 0x92481000 - 0x9255eff7 com.apple.vImage 4.0 (4.0) <64597E4B-F144-DBB3-F428-0EC3D9A1219E> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x9255f000 - 0x92d4e537 com.apple.CoreGraphics 1.543.33 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x92dca000 - 0x92e65ff7 com.apple.ApplicationServices.ATS 4.2 (???) <3BEB7210-4C85-7309-B22D-695765526524> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x92e6e000 - 0x92f06fe7 edu.mit.Kerberos 6.5.9 (6.5.9) <6BE72972-E512-19E3-F68A-67A0548498D9> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos 0x92f07000 - 0x92f07ff7 liblangid.dylib ??? (???) /usr/lib/liblangid.dylib 0x92f08000 - 0x92f4aff7 libvDSP.dylib 268.0.1 (compatibility 1.0.0) <3F0ED200-741B-4E27-B89F-634B131F5E9E> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x92fcf000 - 0x92febfe3 com.apple.openscripting 1.3.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x92fec000 - 0x93099fe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <3308DD74-5D03-6189-2AFD-63BF06848E91> /usr/lib/libobjc.A.dylib 0x9329c000 - 0x932f7ff7 com.apple.framework.IOKit 2.0 (???) <69E4FE93-376C-565E-650F-04FAD213AA24> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x93311000 - 0x93331fe7 libresolv.9.dylib 40.0.0 (compatibility 1.0.0) <03019DD7-993D-AC88-6636-179F92F315C4> /usr/lib/libresolv.9.dylib 0x93367000 - 0x9336bff7 libGIF.dylib ??? (???) <03880BA1-7A86-0F2B-617A-C66B1D05DD70> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x934d0000 - 0x934d2ff7 com.apple.securityhi 4.0 (36638) <3F66C91E-D1D7-8E85-4CF8-A8B557D6DBC5> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x93542000 - 0x936feff3 com.apple.ImageIO.framework 3.0.2 (3.0.1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x936ff000 - 0x93a1ffeb com.apple.CoreServices.CarbonCore 861.6 (861.6) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x93a20000 - 0x93a6dfeb com.apple.DirectoryService.PasswordServerFramework 6.0 (6.0) <52906E26-3D22-6F37-8C90-E50BBCDEA5D0> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordServer 0x93a6e000 - 0x93d67fef com.apple.QuickTime 7.6.6 (1729) <4C99ED7D-5A4B-E41E-602D-2D01A99168CD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime 0x93d68000 - 0x93f0dfeb libSystem.B.dylib 125.0.1 (compatibility 1.0.0) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib 0x93f0e000 - 0x93f18ffb com.apple.speech.recognition.framework 3.11.1 (3.11.1) <45083DBA-5EA4-9B90-8BEB-A089E515180F> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x93f19000 - 0x93f1ffff com.apple.CommonPanels 1.2.4 (91) <2438AF5D-067B-B9FD-1248-2C9987F360BA> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x93f20000 - 0x93f21ff7 com.apple.TrustEvaluationAgent 1.1 (1) <8C570606-D77C-738E-7148-6B28846F0B3C> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/TrustEvaluationAgent 0x93f22000 - 0x93f23ff7 com.apple.audio.units.AudioUnit 1.6.3 (1.6.3) <959DFFAE-A06B-7FF6-B713-B2076893EBBD> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x93f24000 - 0x93f93ff7 libvMisc.dylib 268.0.1 (compatibility 1.0.0) <2FC2178F-FEF9-6E3F-3289-A6307B1A154C> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x93fd6000 - 0x94104fe7 com.apple.CoreData 102.1 (251) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x94105000 - 0x941b5ff3 com.apple.ColorSync 4.6.3 (4.6.3) <68B6A1B9-86CF-0C5A-7D63-56ED4BB2EB5B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x941b6000 - 0x941b6ff7 com.apple.Cocoa 6.6 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x9420d000 - 0x9420dff7 com.apple.Carbon 150 (152) <811FC695-B346-354A-EDEA-1D243DE50BC8> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x9420e000 - 0x94241ff7 com.apple.AE 496.4 (496.4) <7F34EC47-8429-3077-8158-54F5EA908C66> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x9489f000 - 0x94931fe3 com.apple.print.framework.PrintCore 6.2 (312.5) <7729B4D7-D661-D669-FA7E-510F93F685A6> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x94932000 - 0x9494aff7 com.apple.CFOpenDirectory 10.6 (10.6) <1537FB4F-C112-5D12-1E5D-3B1002A4038F> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpenDirectory.framework/Versions/A/CFOpenDirectory 0x9494b000 - 0x9495dff7 com.apple.MultitouchSupport.framework 204.12.1 (204.12.1) <6BB58E90-21FA-C491-F0E4-54B69CCDBBC0> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/MultitouchSupport 0x9495e000 - 0x94973fff com.apple.ImageCapture 6.0 (6.0) <0E86F45E-E656-9015-7AD4-A2C5F8D8A2FA> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x94974000 - 0x94974ff7 com.apple.CoreServices 44 (44) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x94a04000 - 0x94a18ffb com.apple.speech.synthesis.framework 3.10.35 (3.10.35) <0DBE17D5-17A2-8A0E-8572-5A78408B41C9> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x94b6a000 - 0x94bcbfe7 com.apple.CoreText 3.1.0 (???) <1372DABE-F183-DD03-03C2-64B2464A4FD5> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText 0x94be6000 - 0x94c0eff7 libxslt.1.dylib 3.24.0 (compatibility 3.0.0) <769EF4B2-C1AD-73D5-AAAD-1564DAEA77AF> /usr/lib/libxslt.1.dylib 0x94c0f000 - 0x95b60fe7 com.apple.QuickTimeComponents.component 7.6.6 (1729) /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTimeComponents 0x95e1f000 - 0x95e43ff7 libJPEG.dylib ??? (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x95e44000 - 0x95e52fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <82B2C254-6F8D-7BEA-4C18-038E90CAE19B> /usr/lib/libz.1.dylib 0x95e53000 - 0x95e60ff7 com.apple.NetFS 3.2.1 (3.2.1) <1F28472D-9913-B8CE-B025-BBA52372F568> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS 0x95fe2000 - 0x96025ff7 libGLU.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x96026000 - 0x9645bff7 libLAPACK.dylib 219.0.0 (compatibility 1.0.0) <5E2D2283-57DE-9A49-1DB0-CD027FEFA6C2> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x9645c000 - 0x9647dfe7 com.apple.opencl 12.1 (12.1) <1BCA4F60-E612-5C1B-EF50-A810D70CDF05> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL 0x964d4000 - 0x964ddff7 com.apple.DiskArbitration 2.3 (2.3) /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x964de000 - 0x96615ff7 com.apple.CoreAUC 6.04.00 (6.04.00) <0551FB8D-0894-B40B-B924-4AF51E3648AF> /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC 0x96658000 - 0x9666cfe7 libbsm.0.dylib ??? (???) <821E415B-6C42-D359-78FF-E892792F8C52> /usr/lib/libbsm.0.dylib 0x96739000 - 0x96749ff7 libsasl2.2.dylib 3.15.0 (compatibility 3.0.0) /usr/lib/libsasl2.2.dylib 0x9674a000 - 0x96751ff3 com.apple.print.framework.Print 6.1 (237.1) <97AB70B6-C653-212F-CFD3-E3816D0F5C22> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x9706f000 - 0x970f1ffb SecurityFoundation 36840.0.0 (compatibility 1.0.0) <9714B2B7-854E-834D-FEEC-07F85E10D557> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoundation 0x97329000 - 0x9736cff7 com.apple.NavigationServices 3.5.4 (182) <753B8906-06C0-3AE0-3D6A-8FF5AC18ED12> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices 0x9737e000 - 0x973c2ff3 com.apple.coreui 2 (114) <29F8F1A4-1C96-6A0F-4CC2-9B85CF83209F> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI 0x973c3000 - 0x973caff7 com.apple.agl 3.0.12 (AGL-3.0.12) <26A3013B-C753-E0DC-EAD1-B0B21ACA33B1> /System/Library/Frameworks/AGL.framework/Versions/A/AGL 0x973cb000 - 0x9744bfeb com.apple.SearchKit 1.3.0 (1.3.0) <2F5DE102-A203-7905-7D12-FCBCF17BAEF8> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x9744c000 - 0x9747dff7 libGLImage.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x9747e000 - 0x974cfff7 com.apple.HIServices 1.8.0 (???) <10C85B88-C6AF-91DB-2546-34661BA35AC5> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x974d0000 - 0x974d3fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib 0x974d4000 - 0x974e5ff7 com.apple.LangAnalysis 1.6.6 (1.6.6) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x97586000 - 0x97589ffb com.apple.help 1.3.1 (41) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x9758a000 - 0x9758eff7 libGFXShared.dylib ??? (???) <286F466C-2856-B579-B87F-4E9A35C80263> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.dylib 0x9790f000 - 0x97b7fffb com.apple.Foundation 6.6.2 (751.21) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x97ef4000 - 0x987d3ff7 com.apple.AppKit 6.6.5 (1038.29) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x98a1e000 - 0x98a21ff7 libCoreVMClient.dylib ??? (???) <98CB96B1-85FE-25AF-AB19-ED061912FC3E> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClient.dylib 0x98a22000 - 0x98ad8fff libFontParser.dylib ??? (???) <5935E105-1E45-886C-6420-C1CCA886C375> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/Resources/libFontParser.dylib 0x98ad9000 - 0x98ae7ff7 com.apple.opengl 1.6.7 (1.6.7) <3C529790-DEE9-AC27-A879-806E4C23323C> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x98c6f000 - 0x98c7aff7 libGL.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x98c7b000 - 0x98d24ff7 com.apple.CFNetwork 454.9.4 (454.9.4) <2F8B5BA5-099F-6CDA-F500-4CA188BBCDBC> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x98d25000 - 0x98d75ff7 com.apple.framework.familycontrols 2.0.1 (2010) <50E74916-19A5-F2FC-AB57-76F2C8DDF0A7> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyControls 0x98d76000 - 0x98d7bff7 com.apple.OpenDirectory 10.6 (10.6) <92582807-E8F3-3DD9-EB42-4195CFB754A1> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory 0x98d7c000 - 0x98d7cff7 com.apple.ApplicationServices 38 (38) <8012B504-3D83-BFBB-DA65-065E061CFE03> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x98f5a000 - 0x99066ff7 libGLProgrammability.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgrammability.dylib 0x99078000 - 0x991a4fff com.apple.audio.toolbox.AudioToolbox 1.6.3 (1.6.3) /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x991ab000 - 0x991e8ff7 com.apple.SystemConfiguration 1.10.2 (1.10.2) <830FED9E-3E24-004C-35D5-2C1273F79734> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x991e9000 - 0x9921eff7 libcups.2.dylib 2.8.0 (compatibility 2.0.0) <458E819A-4E3F-333E-28CE-671281B318D3> /usr/lib/libcups.2.dylib 0x9922c000 - 0x9924aff7 com.apple.CoreVideo 1.6.1 (45.4) /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x9924b000 - 0x99326fe7 com.apple.DesktopServices 1.5.5 (1.5.5) /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x99327000 - 0x99342ff7 libPng.dylib ??? (???) <929FE8EE-277D-F6EB-D672-E6F4CEBF1504> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x99361000 - 0x99361ff7 com.apple.Accelerate 1.6 (Accelerate 1.6) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x993ca000 - 0x996eefef com.apple.HIToolbox 1.6.2 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x996ef000 - 0x996f1ff7 libRadiance.dylib ??? (???) <9358E1EF-F802-B76E-8E23-2D0695787CFB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9 Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB Memory Module: global_name AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.9.8 Bluetooth: Version 2.3.1f4, 2 service, 19 devices, 1 incoming serial ports Network Service: AirPort, AirPort, en1 Serial ATA Device: ST31000528ASQ, 931.51 GB Serial ATA Device: HL-DT-ST DVDRW GA11N USB Device: My Book 1110, 0x1058 (Western Digital Technologies, Inc.), 0x1110, 0x24300000 USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000 USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 USB Device: Ikarus Interface, 0x127f, 0xe007, 0x04100000 USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
Posted on: 6/2/2010 9:03 AM by Author "SoCalSal" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=9775462