RE: MVVS 120 twin boxer
[size=2]Hi Fellows I now need parts for this Boxer 120 Carb # WYK41D5[/size] Of course all help is appreciated Sparky
Posted on: 7/8/2010 6:39 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9852840

MVVS 120 boxer engine
Has anyone information on the 120 boxer engine. I beleive it was purchased about 7 years ago. I can find petrol boxers but no nitro run MVVS 120 boxer or twin.0
Posted on: 6/16/2010 12:08 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9802832

RE: MVVS 120 boxer engine
pe reivers One of my post were deleted also. Could you repost the information on the 120 boxer. Thanks
Posted on: 6/15/2010 5:48 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9805356

RE: MVVS 120 boxer engine
checking
Posted on: 6/15/2010 5:42 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9805341

oPTIC 6 -72 MG OR 2.4
HIT159723 — Optic Sport 6Ch FM w/3-81/06MT Vendor: HITEC Category: 6-Ch FM Aircraft Radio Systems IS THIS 72 MG
Posted on: 6/2/2010 8:14 PM by Author "Sparkey" in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=9776885

Hi Tec Opti 672 mhg
[b]Lately this radio has been acting a little funny .For instance.Channel 1 can not be programed its stuck on Idle On. When I try to cancel or put a model name in Nothing changes. There is a way to Reset the whole radio but I can not remember-any help. Last question -is the program stored in the module or radio? If so I should be able to remove model to save the programming -yes -no?[/b][size=4][/size]
Posted on: 6/1/2010 4:05 PM by Author "Sparkey" in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=9773877

RE: dead engine??????
Gentlemen Thanks for all the input. Engine is now running . Here is what i did. Changed gap on plug. Washer on plug was leaking compreesionfixed Needle valve settings 2 full turns open. Used electric starter for first couple of starts . Sparkey
Posted on: 5/22/2010 3:17 PM by Author "Sparkey" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9751663

dead engine??????
I have a MVVS 35 cc engine that will not run. I bought on RC Canada and the fellow told me he left the ignition on for a lengthy period and burned out the regular ignition. He then replaced it with a zenoha ignition and said it run fine. ONE MONTH AFTER PURCHASE I tried to run today and here is what happened I have purchased a 35 cc MVVS and the information I got when I bought new but run twice it was. The fellow run the engine and on the second run left the ignition on for an hour or so. (burnt out origenale ignition ) He said he replaced it with a Zenoha ignition and it ran OK. ( his word) Well 1 month later I tried to start and here is what's happening. First start fired up rightaway for to 8 seconds . Second attempt fired up for a couple of seconds. Third plus attempts - nothing . I have spark can see it when flipping over Fuel looks like its coming up the fuel line. Tried to deposit fuel directly into plug outlet (did not fire) All input will be gratefully accepted.
Posted on: 5/21/2010 10:24 PM by Author "Sparkey" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9750526

RE: lightmax zippy 5000 Mah Battery Balancing
As I am relitively new at electric >I am not sure of all the correct terms . What I mean is the battery pack balanced each cell equal Kc
Posted on: 5/19/2010 6:43 PM by Author "Sparkey" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9745404

RE: lightmax zippy 5000 Mah Battery Balancing
I have always used the venom charger balancer or the small independent one. How can you bring them equal
Posted on: 5/19/2010 6:26 PM by Author "Sparkey" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9745376

lightmax zippy 5000 Mah Battery Balancing
[b][/b]I have two light max 5000 mah lipos5 cell18.5 volts I have been charging them with a Venom chargerbut it seems the cells are not evenly matched. What is the best way to even them out so each cell is equal? Thanks for the help
Posted on: 5/19/2010 6:03 PM by Author "Sparkey" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9745319

Help with replacement
[b][size=4] I have a Dualsky 4260 on a senior telemaster. This engine pulls with authority.Much better than the 90 Super Tiger I had on it before[/size][size=6][/size][/b] The problem is the rear bearing went after only 11x 6 minute flights. I have talked to the the dealer and he indicated he may help. We will see. My question is Recomend anynother brand brushless with the same or better power. This is all I have on the Dualsky4260 Max power-(15s):1100 watt 3 to 5 cell lipo Max efficieny : 40 whieght233 gr. And I run 5 cell lipo on this set up Thanks
Posted on: 5/15/2010 3:13 PM by Author "Sparkey" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=9735695

Webra 60 geared engine
I have a Webra 60 geared engine with tuned pipe and header. Could any one give me any information on this engine. Date,prop ,rpm .fuel, ect Please and thanks. Ken
Posted on: 5/12/2010 4:40 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9729291

RE: Identifie please
Thanks John. Ken
Posted on: 4/23/2010 1:19 AM by Author "Sparkey" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9682176

Identifie please
Please help Identifie this pattern ship . It is going to the auction and I am unsure of what it is . It powered by a Webra 60 with gear reduction. Nice plane well built. Thanks [image][/image]
Posted on: 4/22/2010 5:48 PM by Author "Sparkey" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9681194

help choosing electric motor
[b][size=7] [size=5]I am building a old dirty birdi pattern plane . Wht. expected 6 pound.wing span 62 inch I need advice on motor and esc to buy that will fly this plane with authority. Any advice on good deals and above will be greatly appreciated Thank[/size][/size][b][/b][/b]
Posted on: 2/28/2010 11:05 AM by Author "Sparkey" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9542606

RE: Help with electric
Hi I have taken your advice to the Ts One more question please . What charger would you suggest from Hobbyking that will cycle charge and balance. Will I need any thing else ?? Thanks Ken Motor - DualSky 4260-5 (680 KV), you can get the motor from 2DogRC, do not buy the Turnigy motors if you want to run on really high RPMs they tend to throw magnets. ESC - Turnigy 80A (HobbyCity) or the DualSky 80A Batt - Rhino 20C 5S 4,900 mAh (HobbyCity) Prop - 11x10 (best size for the set up ) or 12x8 to 12x10 (with good throttle management if you use the 12x10, its pushing the motor to its limit)
Posted on: 6/21/2009 8:01 PM by Author "Sparkey" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=8869819

which charger
As a newbie to electrics I need advice on this carging system for the below battery esc setup . http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7523&Product_Name=Turnigy_Accucel-8_150W_7A_Balancer/Charger Thanks Sparky Rhino Battery > Capacity : 4900mAh > Constant discharge: 20C > Burst rate: 30C (15sec) > Configuration : 4S 14.8v > Pack size: 165x32x42mm > Weight : 498g > Discharge plugs: 5mm Bullet-connector > > Product Config Table > Capacity(mAh) 4900 > Config(s) 4 > Discharge(c) 20 > Weight(g) 498 > Max Charge Rate (C) 2 > > > > > Esc > Plush 80A 26v Brushless Speed Controller > The Plush series ESC are a very good quality controller. They have a broad > range of programming features and a smooth throttle response compared to > other BESCs in the same price range. > > Our TURNIGY speed controllers come with a 14 month warranty. We guarentee > these are the best Brushless Speed Controllers you can purchase at this > price. > These speed controllers are sold in western countries under various names > at > triple the price. > We are certain you will find these to be the best BESC available from > Asia. > > > Cont Current: 80A > Burst Current: 90A > UBEC Mode: 3A/5v out > Voltage Range: 5.6v ~ 26v > Weight: 91g > Size: 88x31x14mm > > User Programmable, both via controller and optional programming card. The > programming card is an excellent item as it instantly tells the user the > current settings and with a few simple clicks of the buttons, the user can > change the settings and have graphical reassurance of those changes. > The programming card is an excellent Item and simple to use! >
Posted on: 6/21/2009 1:30 PM by Author "Sparkey" in the forum "MRC Charger Product Support (i.e. Super Brain, etc)"
http://www.rcuniverse.com/forum/fb.asp?m=8869152

Help with electric
I am going to try my first large electric but definatly need help . I have been lookig at HOBBY KING and I am completely lost . don't kinow a volt from an amp LOL so to speak. Dam near electricuted myself fixing my electric razor the other day. So I need help. PLane is a Flycat 46 pusher(picture) calls for gas but to complicated . What size engine ,esc and battery . Someone suggested a 64 eflight, 60 speed controll and a 5000 ml amp battery. Now if you look at the tail prop area I have only 12 prop inches clearance. Please suggestion from all happily accepted. Thanks PS.The plane weighs aprox 3lbs/8 oz with servos and reciever <! messag><!ttachment> Attached Thumbnails Click image for larger versionName: flycat 1.jpgViews: 0Size: 91.2 KBID: 53891 Click image for larger versionName: flycat 1.jpgViews: 0Size: 91.2 KBID: 53891 Click image for larger versionName: Flycat 46.jpgViews: 0Size: 91.1 KBID: 53893 Click image for larger versionName: Flycat 46.jpgViews: 0Size: 91.1 KBID: 53893
Posted on: 6/18/2009 8:39 PM by Author "Sparkey" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=8863297

batterys for larger scale
Built Yak 20% and putting in ccpro 26 gas motor with electric ignition in it . I am considering 2700 millamp NiMH for reciever and ignition . What is a good quality battery for this operation and what type of flying time should I expect. Thanks Sparky
Posted on: 4/9/2009 3:30 PM by Author "Sparkey" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8665067

RE: Club Enya
Thanks for the reply . I bought this to go in a Bretling I have. It would not fit with out cutting up the cowel so I did sell them both to an Enya lover. OH but the way Itook the money and bought a golden knight 72. Dam Money burns holes in my pocket if I keep it there to long . Regards Sparky
Posted on: 3/8/2009 9:58 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8554325

RE: Club Enya
Hello all you enya lovers . Myself included Could anyone give me an idea what to ask for this 80 enya with good compression had slight ding on crome tappet rod cover. The good thing is it will come with what i believe a full motor in parts as shown. I purchased this to put in a BretlingPattern plane but it will not fit . The plane had a 72 os fourstroke and I do not want to chop the cowel anymore to make this enya fit. Sparky
Posted on: 3/6/2009 4:07 PM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8550799

RE: Does anyone else love Enya engines?
Hi Just reading your post on parts . I to just bought a Enya 80 . and the plus was it came with a whole engine in parts. do you have the engine schimatic for the enya eighty Do you think you could send me a copy . If any parts from this engine is missing I will be parting it out and selling. Sparky
Posted on: 3/5/2009 11:46 AM by Author "Sparkey" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8546480

RE: Six bolt prop on single bolt hub
I screwed up a patern on a 18x6 prop one time . Filled with dowels and resen . then redrilled
Posted on: 1/30/2009 9:06 PM by Author "Sparkey" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8421154

RE: RIPPED OFF BY Superman72
Not sure who you mean . However I filed a complain with RCU and they have suspended him . He was using a false club name and when I checked with them they checked there roster for 3or 4 years . Never heard of him. Phoned numerous times no luck Emailed numerous time no luck Rcu sent message No Luck.. Please do not feel sorry for this guy because if you do he will steal your pants LOL
Posted on: 1/28/2009 10:43 AM by Author "Sparkey" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=8411381

RIPPED OFF BY Superman72
Much to my dismay i feel I must report a case of suspected fraud DETAILS Made a deal on RCU with SUPERMAN72.(REMEMBER NAME (Dail Murphy) DEAL WAS . WE BOTH HAD MOTORS AND AGREED TO AN EXCHANGE PLUS HE WAS GOING TO PUT CASH IN WITH ENGINE FOR SHIPPING. Sucker me rushed to the post office insured and sent tracking . Well he got his and I got nothing This started in 2008 dec aprox 10. He recieved his engine end of DEC . I wrote and he told me he put wrong address on my parcel so he would send it again. Now Jan 27 2009 and no engine No reply to emails send ,He used false club membership on his profile . Contacted Alanta hobby and seem as if he new of him but provided no info so I ask to have him phone when he came in . I also Contacted mail fraud dept and going to contact Delonega police dept.I am enclosing pictures of this motor which will stand out like a sore thumb because of the welding on the crankcase. If you know this guy do not buy the stolden motor and please contact me ASP. He will be hanging around one of the flying site around Delonega Georgia. He also has been suspended from RCU
Posted on: 1/27/2009 8:07 PM by Author "Sparkey" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=8409350

RE: SEARCH FOR SUPERMANII
[b][size=4]YOU SHOULD BE NERVOUSE . HOWEVER HE IS BANNED FROM THIS SITE . Sent emails to his supposed club .They never heard of him . Call us postal service .(checking into it) Also notified other clubs within fifty mile o fDahlonega Georgia. And ask Dahlonega police to do a drive by LOL . [/b][/size]
Posted on: 1/25/2009 7:15 PM by Author "Sparkey" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8400551

SEARCH FOR SUPERMANII
[b]I am trying to locate Superman 72 of Dahlonega Ga as he has a gas engine he never paid for or mailed. I have been waiting since Dec 1 2008. I have not been able to contact him through email or phone. If you know this fellow please ask him to send me my 185.00 [/b][color=#990000][/color] Buyers and sellers beware Sparky
Posted on: 1/23/2009 3:22 PM by Author "Sparkey" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8392224

RE: SEARCH FOR SUPERMANII
[b] Hi Bill . It was done thru RCU however it was a swap of two engines plus cash. I sent mine as agreed but I never got the one he sent plus the cash in the parcel. The deal was a Japanes gas engine I had to trade him for a os 90 plus 20 bucks cash. Oh by the way I just filed a complant with RCU 25 years in the hobby bought and sold hundreds of items but finally got screwed. Sparky [/b][color=#990000][/color]
Posted on: 1/23/2009 3:22 PM by Author "Sparkey" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8392384

RE: Hi tec servos not getting full travel
Thanks Mike . Talked to tech fellow had me set it to reset and all is well now.
Posted on: 12/15/2008 5:47 PM by Author "Sparkey" in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8248897