RE: Zenoah 26 upgrades
Lol No 30's are readily available, had early dle side carb and had nothing but issues. A 26 is plenty of power and I need to get the noise down as we have a fairly strict 82db over here. And... It's a bit of fun. See what I can knock up!!
Posted on: 5/16/2013 12:53 PM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11513434

RE: Zenoah 26 upgrades
most of the bits are either arrived or on the way list of bits New NGK spark plug Carb bend tuned pipe manifold Rcexel ignition I have also got hold of a WT-540 carb that has a choke so have both the 645 and this one to compare. Going to start on a Menz 18x8 prop to see how it goes. Looking forward to getting all the bits on and will take some photos once assembled. Anything else worth looking at? Do the Ralph Cunningham conversions have any other mods? Bowman ring??
Posted on: 5/16/2013 2:59 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11512926

RE: EME60
what does a dle55 swing on the vess 24A? what are you flying it in?
Posted on: 8/21/2012 1:50 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11200575

RE: EME60
what does a dle55 swing on the vess 24A? what are you flying it in?
Posted on: 8/21/2012 1:49 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11200574

EME60
anyone got one? tried one? recommend one?
Posted on: 8/20/2012 7:54 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11199609

RE: ViperJet logo in DXF ?
I am looking for it in ai format... anyone?
Posted on: 4/17/2012 7:19 AM by Author "Stu26" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11045578

will DLE 111 standard mufflers fit on a TMM 106?
As the title suggests, will the 111 standard mufflers fit onto a TMM106?
Posted on: 10/17/2011 5:08 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10769132

RE: TMM 106 ir /DLE 111
how does the TMM compare to dl100 or DA100 in power? is it still a few hundred RPM down?
Posted on: 10/13/2011 8:29 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10763140

What cans for a tmm106
I have a TMM 106 and need to get some canisters. It will be going in a 104" slick. Noise is a big issue. Anybody used cans on this motor? I was thinking of either ASPower or Zimmermann?
Posted on: 7/28/2011 3:02 PM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10643693

RE: Dalotel
The Chip Hyde one from TOC 1999 picture on other page, is that a plan or kit? I would like to get a Dalotel that would be good on a 50ish cc motor. Any info I would be grateful of. The tail looks lower in this photo than most of the other versions?
Posted on: 7/14/2011 9:24 AM by Author "Stu26" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10620900

RE: Dalotel?
Anyone know of the plans/dimensions of the Hanno Dalotel? I notice that he has the tail a little lower than the full size.
Posted on: 7/14/2011 6:30 AM by Author "Stu26" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10620668

RE: GOLDWING MX2
[link]http://www.highalpha.org/forum/viewtopic.php?f=4&t=2941&p=24861&hilit=global+rc+50cc+MX2#p24861[/link] Here you go
Posted on: 7/12/2011 6:09 AM by Author "Stu26" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10617561

50cc 55M
Any pictures or specs of the 50cc 55M yet?
Posted on: 6/26/2011 3:11 AM by Author "Stu26" in the forum "JTEC / RADIOWAVE Support"
http://www.rcuniverse.com/forum/fb.asp?m=10592531

RE: What Aircraft are you installing your DLE20
I have been running a DLE20 in a Extra 300. Its on a Jtec pitts muffler. Had a couple of tanks and finally got round to taching it last night. Its a Vess 17x6 and was pulling 8700 rpm!!! I am going to try a 18x6 next...
Posted on: 5/5/2011 3:22 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10502433

RE: 50cc Sukhoi
[link]http://www.goldwingrc.com/en/ProductView.asp?ID=95[/link] Look up the gold wing dealers in the USA
Posted on: 1/23/2011 9:16 AM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10282426

RE: Pitts style muffler?
Does any one know how much qieter the large volume wrap around from Jtech is in comparison to the standard? and are they any way near as quiet as a China Can? appreciate your advice.
Posted on: 1/12/2011 4:58 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10257406

RE: Which engine for an Extreme Flight 110
TMM 106 Top Dawg has them and Blaine rates it that much he has got exclusive USA distribution.
Posted on: 8/13/2010 7:49 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9930420

RE: Which around 100-115cc twin 2-stroke do you prefer and why?
I think you should add TMM 106. I just got one and it is one sweet engine.
Posted on: 5/1/2010 2:29 PM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9702575

RE: looking at new 50cc planes need help
Don't forget the new GW range from Dietrich.
Posted on: 12/30/2009 3:46 PM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9372575

RE: Best bang for the buck?
why not check out the new GW range from Dietrich? the 55M is sweet as!!
Posted on: 12/2/2009 1:42 PM by Author "Stu26" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9297778

RE: 3D Plane for DLE 55cc
check out [link]http://www.dietrichaircraft.com/[/link] they got a new Edge and a complete new range coming including 55M!!
Posted on: 9/22/2009 4:38 AM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9114568

RE: HELP!! Choice of 100cc airplane for precision and 3D
How about the new EG range from OMP?
Posted on: 9/14/2009 6:15 AM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9094026

RE: Yak-55M 30%
[link]http://vimeo.com/4570734[/link] an even better video
Posted on: 8/21/2009 5:50 PM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9034249

RE: Yak-55M 30%
I have the Global RC 55M in the UK with a DA50 and it is awesome. Built very straight and no trim on test flight, 3D's with the best of them and can do precision as well. Have you seen this video? [link]http://vimeo.com/4753902[/link] I can't fly anywhere near this, but it is nice to know that it can do it, and that the only thing holding it back is my flying ability!!!
Posted on: 8/21/2009 5:43 PM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9034233

RE: What new plane for my DL50?
How about the new Dietrich Edge? [link]http://www.dietrichaircraft.com/files/50CCEdge540featuresFinal.pdf[/link]
Posted on: 8/10/2009 7:55 AM by Author "Stu26" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9004225

RE: NEW DLE30!
I have seen a video where the Dl30 swings a 19x8 at 7200 rpm!!!!
Posted on: 7/28/2009 9:30 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8970340

RE: NEW!!!XYZ 26HP WITH A ROTARY VALVE
Where are the pictures? and will it get near the DL30 performance? I have sen a video of the DL30 swing a 19x8 at 7200 rpm.
Posted on: 7/28/2009 7:12 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8970154

RE: need cowl for QQ 85" YAK
[link]http://www.szhh.net.cn/[/link] Have a look here....
Posted on: 5/5/2009 12:04 PM by Author "Stu26" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8742592

RE: 2 attractive 26 cc engines, but which one ?
http://rcextremepower.net/ These guys have a really strong 26cc coming, be worth dropping Milton a line to get the low down. [link]http://www.youtube.com/watch?v=ilVxS92XAik[/link]
Posted on: 3/24/2009 5:32 AM by Author "Stu26" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8610526

RE: Which is the best simulator to practice airplane 3D ?
You guys must fly Phoenix, just upgraded from Realflight and is so much better for 3D practice.
Posted on: 1/12/2009 6:21 AM by Author "Stu26" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8348562