RE: Anybody gonna do a EU1A build thread?
I think I can get around 9-9.5 pounds. I dont know about the gorila glue, if it expands out of the wood it seems it would be very tough to sand it.
Posted on: 6/4/2012 9:04 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11106801

RE: Need a set of four IO720 motor mounts
I may be able to help...............ED
Posted on: 6/4/2012 7:59 PM by Author "SuperViking" in the forum "Airplanes - Full Scale"
http://www.rcuniverse.com/forum/fb.asp?m=11106726

RE: Anybody gonna do a EU1A build thread?
Good suggestions thanks!
Posted on: 6/4/2012 6:50 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11106623

RE: Anybody gonna do a EU1A build thread?
I have several choices to power it with, Novarossi 60f RE with MC carb, O.S. 91DF, O.S. 91RZ-H Rear Exhaust Heli with MC carb, or Jett 90 RE. That heli engine will flat go with a 11.5x9 CF prop!
Posted on: 6/4/2012 5:59 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11106539

RE: Anybody gonna do a EU1A build thread?
I am getting set up so its gonna be a couple of weeks before a buy the kit, the reason I wont them light is I can glass and paint as light as anybody, always had a knack for that. so it has to be fully sheeted, I did think of honeycombing the cores though.
Posted on: 6/4/2012 11:20 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11106067

RE: Anybody gonna do a EU1A build thread?
I do however want to cheat a little and have the wings sheeted, I can do it but I always seem to make them come out heavier than I want, weight is critical on this bird.............Any sugestions?
Posted on: 6/3/2012 4:20 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11105100

RE: Anybody gonna do a EU1A build thread?
Yea I will have plenty of picks when I get started, I am finally able to do a build since moving to FL. I will keep you guys posted.
Posted on: 6/3/2012 4:56 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11104536

RE: Anybody gonna do a EU1A build thread?
I can not remember exactly but length and span are close to typical 60 pattern ships. but everything is wider than your typical 60 ship. 10 pounds+ is common some get them around 9.5. but a wonderful flying airplane once on step. gonna have to get together and do a build thread......................Ed
Posted on: 6/1/2012 3:13 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11102991

RE: Webra 80f LS
both
Posted on: 5/31/2012 4:20 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11101693

RE: MK Skymaster - worth?
NIB 200.00
Posted on: 5/31/2012 1:44 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11101541

RE: Anybody gonna do a EU1A build thread?
I will give it a shot, How have you been? I bought your viper 91 from you a while back and loved that bird. that 91 put out the power and never could find one to do it since. same set up as original and the rest just fell on their face.
Posted on: 5/31/2012 5:32 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11101010

RE: Anybody gonna do a EU1A build thread?
Thats who I am gonna get my fuse and wings from, I thought Carolina Classics was going to have a nice bird but guess he decided to quit with the EU1A, cant get any response. thanks for the info though.
Posted on: 5/31/2012 3:47 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11100915

RE: Anybody gonna do a EU1A build thread?
First off where can I get a three view drawing for this plane so I can sorta plan out what and how to equip and play around with schemes?
Posted on: 5/30/2012 3:00 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11100376

Anybody gonna do a EU1A build thread?
I am thinking of building one but looking for a thread to build along side with..................Ed
Posted on: 5/30/2012 2:49 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11100355

RE: Webra 80f LS
Doxilla I have two of the speed 80 SE one nib and the other on a TIPO 750 and its a super powerful engine, mine has bolt on exhaust instead of strap on like the earlier ones with a webra factory header and pipe, tn2 carb 11.5x9 bolly carbon prop. wish they were still around.
Posted on: 5/29/2012 10:00 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11098634

RE: Webra 80f LS
Are you talking about their latest 80f racing re with pump or the early speed 80 side exhaust?
Posted on: 5/26/2012 8:41 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11095305

RE: relocating hinge slots
Sounds good thanks for the help, It will take a little time to get used to this tool, one other thing I noticed is that if tips are installed prior to hinging you cant get it to the edge as far as needed.
Posted on: 4/23/2012 8:21 AM by Author "SuperViking" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=11053431

relocating hinge slots
I have been building for 24 years and have stumbled on a new problem. I went out and bought the electric hinge slotting tool from great planes and even thought its quick, it will cut a nice slot in the wrong place fast! I ended up with the elevator hinges off center and would like to know if there is some way to fill in the hinge slots and relocate, I think filler will work fine but just looking for a different opinion.
Posted on: 4/23/2012 7:29 AM by Author "SuperViking" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=11053363

RE: Curare Build
Thanks for the info.
Posted on: 3/20/2012 8:31 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11008248

RE: Curare Build
I know this is old but when installed the trailing edge before sheeting the wings how did you taper it to follow the airfoil without harming the cores, or was it already pre-shaped? ...............................thanks
Posted on: 3/19/2012 3:02 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11007356

RE: best pattern plane for ys115
THATS STILL OBTAINABLE.
Posted on: 1/3/2012 5:45 AM by Author "SuperViking" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10889155

best pattern plane for ys115
I am searching for a high quality 91 to 115 sized arf pattern plane. Dont really care for world models arfs. thanks.....................................Ed
Posted on: 1/3/2012 5:20 AM by Author "SuperViking" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10889134

RE: Who made the Royal ARF kits?
Older arfs from royal like the telstar and cheerokee , chipmunk were just like OK model factory or EZ arfs, I actually think they kitted them for royal as they did for global sportsman etc, if you have one look at the plastic hardware tree and you will find ok model factory on the flashing..................Ed
Posted on: 12/28/2011 12:54 PM by Author "SuperViking" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10879964

RE: yoshioka dash 25 build
Sorry but I never really got started because of relocation for my job. I will start it one day but in the mean time I am thinking of another classic build just dont know what yet, any suggestions, I like the EU!A but cant decide. the yoshioka kit is still in Georgia all packed away for a much later date........................Ed
Posted on: 12/20/2011 12:28 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10868454

RE: phoenix ARF
Well I am getting somewhere now, Tony R I will send you some pics next week when I get home and thanks a bunch, I cant wait to get mine built when these issues are resolved.................................Ed
Posted on: 9/23/2011 9:58 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10730549

RE: phoenix ARF
I called the first two times to talk to Product Support. Stayed on hold for 15minutes the first time to explain what problems I had and finally I gave them my call back info. Never heard anything back that day. Next day I call again after another 15 minutes or so I do the same with the call back info. They called me back within the next hour, I very nicely explained all the problems I was having and was willing to deal with fixing the misaligned control surfaces. But the crooked vertical and fuzzy paint lines I was not. they did ask me to photo this stuff and they and the experts at Horizon would get back with me. I never got a return call or email after a day and a half. I called to make sure they got it. After 5 minutes of searching they said yeah but it looks straight to them. So I told them that I would not be going through this if it was straight and would really like to get a replacement fuselage for the one I have now. They want me to send mine to them so they can evaluate it and then if they determine that it has fuzzy paint lines and a crooked vertical fin tip It would take 10 to 15 days for a replacement fuselage. ................
Posted on: 9/22/2011 10:35 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10729029

RE: phoenix ARF
I looked at another plane the other day (phoenix 7 arf) that was flawless compared to mine, I dont understand why horizon did not sell me one like the one I looked at yesterday. I have called them a few times and sent a picture and no good customer service in my opinion. If they will make it right I would buy two more, I have lots of kick ass engines that need this type of home.
Posted on: 9/22/2011 8:38 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10728865

RE: phoenix ARF
I have no problem with the country it was built in. Also I think Mike M. did a good job with this project and would love to see more like this in the future. I just like my stuff right no matter where its built or if its 1.00 or 350.00. I work hard for my money as do most others. Now if I could get the fuselage replaced without jumping through hoops I will be happy...............................................ED
Posted on: 9/21/2011 1:25 PM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10727751

RE: Webra 61 Muffler
On flea bay all the time .
Posted on: 9/16/2011 7:06 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10719287

RE: phoenix ARF
Anybody doing a build thread on an EU1-A. Maybe we can do one together. Last one I had I bought used and loved it. Should have never let it go. It weighed a ton but once it was on step it would groove like no other.
Posted on: 9/16/2011 6:10 AM by Author "SuperViking" in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10719230