RE: RC Pilot 50cc Build
AirTech after moving back the firewall did the engine end up in the center of the cowling. I read in the manual that the engine cowl has the 2 degree ofset already built in.
Posted on: 6/28/2009 10:48 AM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8887948

RE: 50cc QB 260 build thread
I understand about the impatient part. I have a new OMP Pro Yak and I am already looking at my next plane. I think it is a sickness i (we) have. I grew up in Ca. The Northridge area in Southern California. Tampa is home now. That Edge looks sharp especially the green one. I was serious looking into a canister or pipe, so I would not have to hack up the engine compartment, but from all the post the performance gain on a can is less than the stock DL 50 exhaust. The tuned pipe are just too much money. Talk to you later . Mark
Posted on: 5/12/2009 10:06 PM by Author "The RC Dude" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8764114

RE: 50cc QB 260 build thread
Hey Chuck I agree they are easer to haul around. Did you consider the extra 300. I think I am gona wait for that one.
Posted on: 5/12/2009 4:17 PM by Author "The RC Dude" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8763177

RE: DL-50 engine
What about a tuned pipe or can muffler. Does a tuned pipe give the mid range or just top end.[:o] I have been thinking of replacing the stock DL 50 exhaust with a pipe of some kind but I am not sure what to get.
Posted on: 5/10/2009 4:39 PM by Author "The RC Dude" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8757290

RE: 50cc QB 260 build thread
[size=1][/size]Anyone flying the 260 with a tuned pipe. I have been using the stock DL 50 exhaust but have been considering a can or tuned pipe?
Posted on: 5/10/2009 4:21 PM by Author "The RC Dude" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8757247

RE: OMP Pro Yak
Thanks Bro.
Posted on: 4/28/2009 6:57 PM by Author "The RC Dude" in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8723703

RE: OMP Pro Yak
Mike, what font did u use for the Pro Bro on the tail on the pro yak? Mark
Posted on: 4/25/2009 6:00 PM by Author "The RC Dude" in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8714853

RE: OMP Pro Yak
Thanks Mike. I will have to do some cutting tonight. Or maybe barrow my brother in law's vinal cutting maching.
Posted on: 4/25/2009 5:33 PM by Author "The RC Dude" in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8714810

RE: OMP Pro Yak
I have the Pro Yak almost done. A few small items left, then it is to the field. Any one else building a Pro Yak. Mine did not have the cool OMP, Pro Yak decals on the wings. What's up with that?
Posted on: 4/22/2009 8:30 PM by Author "The RC Dude" in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8706644

OMP Pro Yak
I ordered a OMP Pro Yak ARF and I am getting my parts in order while I wait for it arrive. I have a Saito 82. I am debating between HiTec servos either 5625 or 5645. What would be better?
Posted on: 4/2/2009 12:07 PM by Author "The RC Dude" in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8641719

RE: 88" EF yak or 86" QQ yak?
What about the Aeroworks Yak? Have you considered it.
Posted on: 2/11/2009 8:28 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8466680

RE: Dave Patrick Edge
Thanks for all the help. I got the plane control surfaces all set up. I decided to take out the choke servo and usa a manually opperated system instead. I have ran three tanks if gas through the plane for break in. I do not think I can wait any longer to fly this plane. I think it will be ok. I plan on taking it easy for the first few flights anyway.
Posted on: 1/13/2009 9:09 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8355351

RE: Dave Patrick Edge
Hey thanks for the conversation Joe. I have almost completed the build. The only problem is that I do not have a manual. Therefore, I do not know what the servo throws and expo. are recomended. If any one has a Dave Patrick Edge 540T manual with the settings your help is greatly appricated. I have found out through others and RCU that 5" is a good starting piont for the CG. With a DL50 ready to fly my plane weighted in at 15.4 lb. Thanks Mark
Posted on: 1/10/2009 1:31 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8342202

RE: DL-50 engine
I just installed my DL50 and a bit confused. The fuel tank has a pick up line and a vent. In my gas boat the vent or pressure line comes from the tune pipe. The DL50 muffler does not have a barb fitting on it. My question is: becaues the carb has a pump does the tank get pressurized from the muffler or is this not needed and the line just a vent.
Posted on: 1/1/2009 10:33 PM by Author "The RC Dude" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8307851

RE: Dave Patrick Edge
The recieved the DL50 yesterday. I think it will great for this plane. The mounting went smooth as, not silk but butter LOL. I still need to mount the servos. That will be tomarrow. Do you think a 22X8 prop will have enough ground clearence? Also for the electronic igniton, DL50, can I use a 4.6 volt pack or should it be a 6 volt.
Posted on: 1/1/2009 5:00 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8306496

RE: Dave Patrick Edge
bump
Posted on: 12/18/2008 10:02 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8259920

RE: DL-50 Question
So how is the DL50 running on all that oil.
Posted on: 12/16/2008 2:52 PM by Author "The RC Dude" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8252025

RE: Aeroworks 50 CC YAK w/DL50
How do you like that DL50? I am thinking about getting one.
Posted on: 12/16/2008 2:50 PM by Author "The RC Dude" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8252014

RE: Dave Patrick Edge
Where did you buy the DL? How much? What size prop did you fly on the 30% PAU? Thanks PM you latter. Mark
Posted on: 12/16/2008 10:56 AM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8251268

RE: Dave Patrick Edge
Thanks Krayzc-rcu What did you mean by [8D] or did my computer not pick a logo? Thanks for the help. Mark PS any pictures of your DP Edge
Posted on: 12/15/2008 2:21 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8248239

RE: Dave Patrick Edge
I am leaning toward a gas engine for several reasons. The sound of course. A gasser rumble is just so cool! If i get another plane I will have more options with a gas engine. Of course opperating cost. BME 50 Sport or BME 50 Classic or Brison: The sport is rated at: 5.2 hp and weighs 2.94 lb. The classic is rated: 5.5 hp and weighs 3.25 lb. Brison 26 lbs of thrust 3.25 lb.
Posted on: 12/15/2008 1:47 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8248134

RE: Dave Patrick Edge
The plane is set up for two servos on the elevator. They will be mounted in the tail with push rods. I was think about using Hitec 5645's all the way around. Should I use 4-40 size or is 2-56 ok? The ailerons have one servo per side.
Posted on: 12/14/2008 10:21 AM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8244264

Dave Patrick Edge
I just bought a DP edge and was thinking about a Moki 2.10. I think the plane had a BME engine in it before. What engine would be better for 3D. Also what toqure servos will I need for the rudder, alleron and elevator? I wanted to use a 6 volt RX battery. I think it would be best to keep this plane as light as possible. Thanks for the help. Mark
Posted on: 12/13/2008 8:30 PM by Author "The RC Dude" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8242893

Tribute CG
I have just completed my Tribute 36 with an OS 45. The manual recomended the CG should be 4 1/2" from the leading edge. I wanted to know if this is the best CG setting or if I should go a little back? Say maybe 4 3/4". What are the advantages to the CG further back. Any help is greatly appreciated. Mark
Posted on: 12/11/2008 3:12 PM by Author "The RC Dude" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8235742

RE: OMP Yak 55 questions
well tell us how did it fly.
Posted on: 12/8/2008 4:41 PM by Author "The RC Dude" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8225685

RE: Tribute .32
I have beef flying mine with an OS .46 and it is perfect.
Posted on: 11/3/2008 6:39 PM by Author "The RC Dude" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8112180

RE: offshore models
Hi there I have a yellow supercat with 3 different cowls. I have pictures and can email them to you.
Posted on: 1/12/2006 9:19 PM by Author "The RC Dude" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=3767471

RE: Magnum .91 Four-Stroke Inverted?
what is a Ironbay Reg?[&o]
Posted on: 4/2/2004 8:44 PM by Author "The RC Dude" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1684980