|
RE: UK - Bickley jets 2009
Blaster 2 available from Al's Hobbies Dave
Posted on: 6/16/2009 5:18 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8857184
RE: Al's Hobbies Mach 1 Jet
For those that are woried about grass operation, i did loads of flying with the prototype-prototype that had a 54 size engine and would fly it in and out of a 40m (120ft) circle cut in a medow and it was all fine, Dave
Posted on: 6/16/2009 4:15 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8855795
RE: UK - Bickley jets 2009
LEAD BALOON comes to mind especially if the red snapper is there !!! LOL
Posted on: 6/16/2009 3:58 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8855785
RE: UK - Bickley jets 2009
stay put! the "Bav" for being the pit b!tch The TJD boys for the banter and a well done
Posted on: 6/15/2009 5:54 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8854454
RE: MUSTANG T51 3/4 SCALE (how big would you like)
Looking good Dave, I know its been hard graft and i do apreciate it!! It will all be worth it when i strap you in the back seat!! keep up the good work Dave
Posted on: 4/27/2009 6:51 PM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8720300
RE: MUSTANG T51 3/4 SCALE (how big would you like)
here is a couple of pictures from saturday
Posted on: 4/21/2009 5:40 PM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8702768
RE: MUSTANG T51 3/4 SCALE (how big would you like)
its being moved to the airfield on Saturday, the airfield is 3 miles from the Dartford crossing (Essex side) so its as near to Kent as it can be without being in Kent! your welcome any time Dave
Posted on: 4/14/2009 10:44 AM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8680217
RE: MUSTANG T51 3/4 SCALE (how big would you like)
Well i got my hands dirty and did some painting myself today!! I know I know but i had to give it a try. been watching Dave and he makes it look easy! Anyway after som calls and texts to dave about mix ratios etc i did the insignias on the side. As a note Nigel, i painted the numbers on the fin with 1k acrylic as aposed to the activated basecoat and the masks were not afected by the paint and the masks pulled away cleanly. Dave
Posted on: 4/9/2009 4:55 PM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8665262
RE: MUSTANG T51 3/4 SCALE (how big would you like)
Ni Nigel, We have tried leaving the paint a week, then we tried 1 day, then we tried 20 mins (pant was still wet and it stretched) we even tried spraying a bit with no thiners as what appears to be happening is the paint is attacking the mask making it go a bit soft and making it curdle slightly. I think this is whats causing the problem as the paint is "welding" itself to the cut edged of the mask. anyway, it still looks fine and after Dave has spent a day playing with the airbrush it will be perfect!!! Im looking forward to burning holes in the sky now!! Dave
Posted on: 4/9/2009 4:02 AM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8663807
RE: MUSTANG T51 3/4 SCALE (how big would you like)
Yo have more patience than me!! 6 hours masking! i would have had my 20 cans of silver spray and done the whole plane in 6 hours! LOL!! Glad i did not though [:D] Photos realy do not do it justice though it realy looks right in the flesh Dave
Posted on: 3/15/2009 5:44 AM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8579524
RE: MUSTANG T51 3/4 SCALE (how big would you like)
looking good Dave [;)]
Posted on: 2/16/2009 3:03 AM by Author "The boys Back"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8481801
RE: Bickley Jet Meet - kent - UK
Nice pictures Mat, how come i never saw you! you cant have changed that much! cheers Greg and all, cracking weekend, i must be loosing my touch! as i never flew over the gun club once, not even in the real plane!! Dave
Posted on: 6/10/2008 6:05 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7604232
RE: Airframe storage solutions?.
Here is mine, Standard Clip in shelving but with broom handles screwed to the suports with pipe lagging slipped over the broom handles, as an when you crash models (i have been doing that a bit lately!) you can re arange them easily. Dave
Posted on: 4/19/2008 5:25 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7393702
RE: Electra ARF first flights
Sandor, is this going to have a bypass? looks dificult to achieve but it will not be very fast without one, Dave
Posted on: 4/16/2008 4:26 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7382640
RE: BVM Electra ARF
Ali Flew his BVM Built Electra ARF at Florida Jets and was very impressed! he also picked up his ready built Electra for P60 power. The Electra is not much smaller than a Bandit but a fair bit more slippery. i think it would be ideal with a P60 Dave
Posted on: 3/12/2008 3:40 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7214050
RE: Funny Video
Jetwelt F-104   £2000.00 entry to bickley jets £5.00 Mark Schroders editing services .. Free Flying skills of Mark Hinton... Priceless For all other things including the repairs caused by landings such as that there's mastercard !
Posted on: 2/19/2008 6:14 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7102963
RE: Funny Video
looking forward to it!! Dave
Posted on: 2/19/2008 11:02 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7100812
Funny Video
Just remenising over the cracking time we had at Pampa Jets last year and the fun we had laughing till we cried at Hammer Marks expence over this Video, turn the sound up!! Red Snapper at 1 oclock!! http://www.youtube.com/watch?v=17kIuihPjFw Dave
Posted on: 2/18/2008 5:07 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7096795
RE: Futaba FASST feedback and TESTING
just a heads up, we had a one of our members have a problem on Saturday, he was flying a trainer on the 6, he had 1 flight, then went to fly it again and he could not get the RX to listen to the TX. the Chairman of the club got his 0000 rated RX test kit out and the TX worked it perfectly with no re-binding. This was on a transmitter that had been previously checked and had the Ripmax "tested" sticker on it. Beware! this TX is on its way to Ripmax for testing. Dave
Posted on: 2/11/2008 5:18 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7057136
RE: Bickley Jet Meet - kent - UK
Me and Azza will be there (as members of course!!) Dave
Posted on: 1/25/2008 3:06 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6968541
RE: BA 777 lands short at LHR
that engine dont look like it was going round fast when it hit looking at the damage! but all the fan blades are missing half way along? Dave S
Posted on: 1/18/2008 1:14 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6928363
RE: Weatronic Introduction - A Video
i think one of these is required!!
Posted on: 12/8/2007 7:38 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6729338
RE: 2007 Taiwan Jet Air Show
now now mick, are you trying to prod DG into commenting [:D]
Posted on: 10/30/2007 4:33 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6559328
RE: Airworld Panther settings and CG needed
you have to realy provoke it to make it bite, dont go putting washout on the ailerons, it is not required. ps i have bought another AW Panther kit [;)] Dave
Posted on: 10/30/2007 4:31 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6559318
RE: Airworld Panther settings and CG needed
no mixing with flaps, and it flys like a dream, but it will bite you if you are agressive with the elevator on the flair and approach. here is a picture of mine on landing (see flaps, airbrakes etc.) at Hungary at the 5th World Jet Masters
Posted on: 10/30/2007 2:53 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6558982
RE: Airworld Panther settings and CG needed
i used belly flaps and the front airbrakes for landing (about 50 deg flaps) and you can do the approach on 1/2 power with exellent throttle response. as for movements thats personal preference, i had about 30 degrees on ail. and elevator and it flew lovely slightly nose heavy (i have no mesurements though, sorry) Dave
Posted on: 10/30/2007 12:24 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6558500
RE: Pull over products wing bags
take care with the ASK 21 wings, if they are Profilm/Oracover like my Airworld ASK 21 then the bubble wrap inside the bags will eat away at the film. i have got to get my wings re-covered this winter because of this. Dave
Posted on: 10/26/2007 7:24 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6540687
RE: Is this legal?
this must be ok as it was full of passengers!!!! this is 100 times worse than the display! http://www.youtube.com/watch?v=PEhAG2MpHMA
Posted on: 10/16/2007 7:12 PM by Author "The boys Back"
in the forum "Airplanes - Full Scale"
http://www.rcuniverse.com/forum/fb.asp?m=6499409
RE: Jet-1A is Looking for Bandit ARF FREQUENT flyers
mine fitted onto my barf with no mods, i have flown it on some pretty bad grass fields and the flexplates are in tact Dave
Posted on: 10/2/2007 6:46 PM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6441447
RE: Regards from Italy
im guessing here, but i think it was to do with stability of pressure, co2 pressure changes considerably with temperature, and the tubes have to run close to their burst point to work. with a bit of reworking they could probably be made to work
Posted on: 9/28/2007 3:49 AM by Author "The boys Back"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6423680
| 
