RE: CEN FF servo question?
Sorry to be a n00b. But what bushings are you talking about?
Posted on: 1/14/2009 7:10 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8358612

RE: CEN FF servo question?
I have the hitech 645mg I think it is in the front. I have tried the stock ones, a futuba one, and this hi-tech with no luck. The car just turns like crap
Posted on: 1/13/2009 11:59 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8355969

RE: CEN FF random questions
Thanks cenracer1. I have tried a whole new shifter kit and the same thing happened. If I screwed it tight I couldnt get the truck to hit 2nd gear.
Posted on: 1/13/2009 11:17 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8355832

CEN FF random questions
Ok so the factory mounts just seem a little weak. Has anyone changed their mounts? If so what did you use or do? The pivot thing used to connect the she shocks to the shock tower seems to always bend, that makes it difficult to pull the shocks off. Has anyone found a better solution then the factory screws? How do you secure the screw and spring for the shift point? I didn't know if using lock-tite was a smart thing to do so I haven't done it. Steve
Posted on: 1/13/2009 8:46 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8355271

RE: CEN FF servo question?
I have the 14mm hexes that Dr.Honda made. I just haven't bought any wheels for it yet. Kinda pointless to buy wheels for something that doesn't even turn lol Ok so I have the new servo in and working fine, it is turning the car, but not what I expected. It still takes a long time for the truck to turn around in the grass, on asphalt it will slide around, in the grass it flips.
Posted on: 1/13/2009 8:38 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8355237

RE: CEN FF servo question?
I figured it out. Thanks guys! Now my question is with a much strong servo why am I still getting crap for a turning radius? If I turn the wheels while the truck is off the ground I get a much better angle compared to when I am running it. How much did it cost you to do a full TMAXX conversion? Would it just be easier to buy a TMAXX? I already have the OS .18 in it. I need to get all the metal gears, and shift kit in there. Right now I am running it as a 1 speed. I can't seem to keep the shift kit screwed it. Keeps falling out :(.....suggestions?
Posted on: 1/13/2009 3:06 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8354038

RE: CEN FF servo question?
What did you do to shorten the arm from the servo? I dont have the truck in front of my but seems like my arm is too long.
Posted on: 1/12/2009 5:23 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8350395

RE: CEN FF servo question?
Maybe its me, but the design doesn't make much sense of it. Thanks Cenracer1. It looks like the joint of the piece that connects to the servo and the arm that connect to the steering is what is binding. I did change the servos out before it sat on the shelf for a year or so. But it worked fine before it Sat. I still have the stock servo, but id really hate to put that back in.
Posted on: 1/11/2009 3:04 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8345958

CEN FF servo question?
Hey everyone, I've been away for a while, but I am back. The FF MT2 is out of the closet, and almost ready to run again. Only thing left I have to work on is the steering servo. For some reason it seems to be binding up when I engage the servo with my controller. The servo itself is fine, whatelse should I be looking at? Is there another way to mount the servo? I think I remember reading that guys are using the RC10 servo side mount? Or maybe I just made that up. Anyway any help would be great! If you have happened to use another servo mount, can you please post pictures if they are available? I would like to see how it is setup. Sorry for the n00b question. Steve
Posted on: 1/11/2009 6:59 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8344714

RE: Official RC10GT Thread
[quote]ORIGINAL: t_burson56 Is this thread still alive? [/quote] I was just wondering the same thing. It has been a while since I have been on due to the fact that my RC10GT is trashed. I am still looking for a roller that has suspension parts included. Once I find one for a good price ill be back in action ( anyone happen to have one PM me LOL ). So let's see some pics and get this thread going again.
Posted on: 1/5/2009 8:39 PM by Author "Tinybaum" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=8323284

RE: Motor Swaps
Wow that is awesome. Thanks for sharing those Vids!! What modding did you have to do to make that fit?
Posted on: 1/5/2009 5:48 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8322511

RE: MT2 Grub screw
Thanks, I will check with them. Tiny
Posted on: 4/13/2007 9:19 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=5709368

RE: ultimatehobbies question
Buy from ultimate hobbies, they are good people. My shipment arrived 5 days after purchase. But if you need it faster contact them and see what they can do. Tiny
Posted on: 4/13/2007 9:17 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=5709363

MT2 Grub screw
Hey guys I cant find the part number for the grub screw between the 2 spur gears. Anyone have the part number? Correct me if I am wrong, but this controls the shift points right? Tinybaum
Posted on: 4/12/2007 4:13 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=5705596

RE: My rc10gt...
Nice truck....to me it looks like a truck that gets run......who wants a shelf beauty?? not me is that the OS 18? Tiny
Posted on: 11/14/2006 7:48 PM by Author "Tinybaum" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=4996642

RE: MT2 shocks screw, and nut
Sweet thanks. If you can find that size that would be helpful too
Posted on: 11/11/2006 6:19 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4983752

RE: Wheel slop
No I dont have that. I will check it out thanks. Anything else?
Posted on: 11/11/2006 6:17 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4983744

Wheel slop
OK here is another thread, so I am a post whore today. I have added the extra bearings to the wheels, and tightened up what i can, but I still have an extreme amount about wheel slop, and its to the point is effects my steering. Tiny
Posted on: 11/11/2006 5:50 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4983647

MT2 shocks screw, and nut
Anyone else have issues with the stock screws that mount the shocks to the tower bending? Any solutions? Tiny
Posted on: 11/11/2006 5:48 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4983641

RE: Grub Screw
Wow, I was about to post the same question.. I lost the screw that adjusts the shift point, and a tiny spring also....sooo till they come in next week my truck becomes shelf decor. Tiny
Posted on: 11/11/2006 5:46 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4983632

RE: CEN #2 Thread...
Here is my Point of view I have had nothing but problems with my truck....sucks sometimes ya know.....i step away for a few weeks or month then come back to it.. CEN, Maybe you should have spent those millions of dollers on durability? I do not agree with this crap of not being able to post our own opinion whether its good or bad.....shouldnt matter. If I write a bad review for rcuniverse it would still get posted correct? Number 1 complaint I see on any board is CEN's customer service needs work.....and telling someone to sell their trucks quietly is WRONG.....That's going to ruin this "improved" image more then him stating his issues with CEN and Their Products. As we know this thread will be locked too. So be it. I agree with what everyone else has already said TINY
Posted on: 11/3/2006 9:27 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4952528

RE: Customrccars.com
[quote]ORIGINAL: Frank88888888 [quote]Well I must say that is "poor judgement" Hence your username!!! HAHHHA Regards, Chris Meyer www.customRCcars.com [/quote] toyhaus here i come... [/quote] Frank I agree, www.toyhaus.com site should be remodeled within the next month or so
Posted on: 9/4/2006 6:31 PM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4709922

RE: HOW TO START THE JATO ????
Pull start will save you weight You might not have to carry the igniter with you if you have the EZ start....durrrrr but you still have to carry the starter and battery Tiny
Posted on: 8/30/2006 1:15 AM by Author "Tinybaum" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=4687919

RE: Customrccars.com
Thats why I just call up www.toyhaus.com they dont have everything listed on their site, but if you want it they will try and get it. They have always been fair on their prices, and shipping is quick. Even when i didnt know what parts i needed i called and they took care of me....2 thumbs, and 2 big toes up for them. Tiny
Posted on: 8/30/2006 12:57 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4687884

RE: body flexes??
Did you check your wire connections?
Posted on: 8/19/2006 5:12 PM by Author "Tinybaum" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=4643451

RE: Official RC10GT Thread
Yeah well I am going to put a small block 327 punched out 60 over, and nitrous. [8|][8|] get real tiny
Posted on: 8/19/2006 5:06 PM by Author "Tinybaum" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=4643430

RE: Just dropping a line to say Hello!!
I actually front the clutch bells locally got it all installed, and my gears, now i cant get into 2nd gear, along with one of the dog bones wont stay in[:@][:@][:@] Suggestions for either of those issues? Tiny
Posted on: 8/18/2006 12:42 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4637322

RE: Official RC10GT Thread
How are you testing your speed? 50mph seems a little high, i could see maybe 40-42 with the right wind, downhill [:D][:D] But if you really got 50 then congrats, doing better then alot of us Tiny
Posted on: 8/17/2006 1:16 AM by Author "Tinybaum" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=4632944

RE: Since when has this existed
Yeah I will still buy parts from other vendors [:@][:@]
Posted on: 8/17/2006 1:13 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4632938

RE: Just dropping a line to say Hello!!
Thanks, man I got my gears today, after I finish typing I will buy thos clutch bells. Anything else i need with the steel gears?
Posted on: 8/17/2006 1:07 AM by Author "Tinybaum" in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=4632917