Looking for set of bearings for MBX6!
Hello people, I'm undecided what bearing set buy for my Mugen MBX6. I would like to pick a good "set" or "kit" that comes many bearings and all the sizes needed/used for the MBX6 as spares. In my search , i.e. ebay, they offer lot of them but most of them come in either metal shield or rubber shield for the whole kit. I'm not sure what's the size for the clutch bearing, but I know it's recomended using the metal shield, the rubber might be better for the knuckles and the teflon for the diff cases. I want a very good long lasting set of bearing, nothing nice and cheap. I can pay more for soemthing that really worth it, a well good known brand or just a goo set of bearings. Any input feedback much appreciated. Some links: Avid http://www.avidrc.com/product/1/bearings/ ebay http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=Mugen+MBX6+bearing+set&_sacat=See-All-Categories
Posted on: 9/7/2010 10:52 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9987448

RE: What pipe/header for Toronero .21?
Yes, but is not like we are many running these engines down here yet, so no much info in different pipes/combos ofr this engine for "our data base". I finally bought this pipe, the Dynamite. This seems to perform equal to the Novarossi pipe suggested for the Toronero according to a friend of mine down here as he is used both and says the engine feels about the same.
Posted on: 5/19/2010 11:15 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9746059

What pipe/header for Toronero .21?
Hello guys, I wonder what pipe should I get between these two pipes for the Toronero. For instance the Nova pipe is EFRA approveed wich is good, but down here we are free to run watever pipe/combo we want and I'm not goign outside of this country to race a international championship yet. The dynamite combo pipe/header is cheaper, looks good performance is good in the JP engien of a friend but not sure how does it work with the Toronero. This is for my Mugen MBX6 1/8th Buggy off road. Thanks http://www.amainhobbies.com/product_info.php/cPath/1_23_32/products_id/9005/n/Dynamite-Platinum-1-8-053-Mid-Range-Inline-Exhaust-System-Hard-Anodized [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/dyn/dynp5003.jpg[/image] http://www.amainhobbies.com/product_info.php/products_id/10692/n/Novarossi-Super-Strong-EFRA-9901-One-Piece-Tuned-Pipe-No-Manifold [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/nvr/nvr51016.jpg[/image]
Posted on: 5/11/2010 4:55 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9726704

MBX6 owners need input for upgrade/optional parts!!
Hello, I would like to know what i should take in consideration to buy all at once but w/o going crazy with the wallet of corse. I'm a new owner of ti MBX6 and stilll didn't drive it, it's a factory builded with Mugen Seiki specs on it. A freind of mine is traveling over the EEUU and I would like to take adventage fromt hsi , so he can buy and bring me some parts. So I was thinking to buy the next few upgraded parts, le tme know if they worth and work well for their pirces of you think ther eis something better, YET, if I'm missing something very important that I'm not realizing. Thanks [center][b]King Headz is a good well known brand? Also, what fuel lines do you recomend guys?[/[/b]center] [link=http://www.amainhobbies.com/product_info.php/cPath/1_25_1480_981/products_id/165111/n/King-Headz-Mugen-MBX6-MBX6T-Rear-Toe-In-Plate-25-275-3]Link 1[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/khz/khz-mbx6-020.jpg[/image] Are these better over the factory steel balls? Innovative Designs "THC" Teflon Hard Coated Pillow Balls [link=http://www.amainhobbies.com/product_info.php/cPath/1_25_1480_981/products_id/20069/n/Innovative-Designs-THC-Teflon-Hard-Coated-Pillow-Balls]Link 2[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/medium/ind/ind-idv-0204.jpg[/image] Mugen Aluminum Front Upper Arm Bracket [link=http://www.amainhobbies.com/product_info.php/cPath/1_25_1480_981/products_id/33853/n/Mugen-Aluminum-Front-Upper-Arm-Bracket]Link 3[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/medium/mug/muge0177.jpg[/image] Fioroni Mugen MBX6 "LIC" Lightweight Front/Rear CVD Bones (2) [link=http://www.amainhobbies.com/product_info.php/cPath/1_25_1480_981/products_id/35900/n/Fioroni-Mugen-MBX6-LIC-Lightweight-Front-Rear-CVD-Bones-2]Link 4[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/medium/fio/fio-ot-lic14.jpg[/image] M2C Racing MBX6/MBX6T 1 Piece Motor Mount [link=http://www.amainhobbies.com/product_info.php/cPath/1_25_1480_981/products_id/165675/n/M2C-Racing-MBX6-MBX6T-1-Piece-Motor-Mount]Link 4[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/medium/m2c/m2c5850.jpg[/image] King Headz Front Torque Arm (MBX6) [link=http://www.amainhobbies.com/product_info.php/cPath/1_25_1480_981/products_id/35430/n/King-Headz-Front-Torque-Arm-MBX6]Link 5[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/medium/khz/khz-mbx6-060.jpg[/image]
Posted on: 5/7/2010 6:55 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9718029

RE: What charger do you recomend me for these batteries?
No opinions!? [&:] Pro Tek o Triton?
Posted on: 5/5/2010 5:09 PM by Author "TurboBimmer" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9712923

What charger do you recomend me for these batteries?
As tittles says, I'm unsure what charger/discharger would you guys recomend me specially for these batteries I'm buying, for the RC car reciever and the battery packs I'm going to fit for the OFAN starter box that I'm going to buy. Compact design Lightweight (only 3.1 pound without batteries) Powerful 750-size electric starter motor Adjustable front chassis support Built-in handle Uses 2 6-cell battery packs (not included) Includes wiring for external 12 volt power [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/ofn/ofn10245.jpg[/image] I will use this battery pack wich has the balance plug for better charge. 7.4v 5000mAh 30c Li-Po Rechargeable Battery Cells : 2 Size :140mm x 46mm x 20mm Weight: 300g [image]http://i.ebayimg.com/08/!Be2dhiQ!2k~$(KGrHqUH-DEErQMhy7+dBK-9hMuTRg~~_12.JPG[/image] For the reciever I'm getting these LiPo batteries: ProTek R/C Li-Poly Flat Receiver Battery Pack (7.4V/2300mAh) [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/ptk/ptk-lp-rx2300-l-2s.jpg[/image] So, I was thinkin of the following chargers/dischargers, what ya think? Any other options? Equal quality or better for less money? [b]Triton EQ AC/DC Charger Balancer [GPMM3155][/b] Wich has already the cable for the AC input (home use), also it has build in 2 balance circuit boards wich is cool. [link=http://www.amainhobbies.com/product_info.php/cPath/1_221_116/products_id/33967/n/Triton-EQ-AC-DC-Charger-Balancer]Link to specs[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/gpm/gpmm3155.jpg[/image] [b]ProTek R/C iCharger 106B+ Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (6S/10A/250W)[/b] [link=http://www.amainhobbies.com/product_info.php/products_id/34713/n/ProTek-R-C-iCharger-106B-Lilo-LiPo-Life-NiMH-NiCD-DC-Battery-Charger-6S-10A-250W]Link to specs[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/ptk/ptk-106b+.jpg[/image] How about this Team Lossi or IMAX B6 wich ae the same but cheaper due the name? [b]Team Losi MultiPro Intelligent Li-Poly Balance Charger [LOSB9606][/b] [link=http://www.amainhobbies.com/product_info.php/cPath/1_221_116/products_id/146775/n/Team-Losi-MultiPro-Intelligent-Li-Poly-Balance-Charger]Link to specs[/link] [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/los/losb9606.jpg[/image] Thanks!
Posted on: 5/4/2010 10:47 PM by Author "TurboBimmer" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9711275

What Futaba servo for Nitro Buggy?
Hey guys, I'm currently undecided what servo buy for my MBX6 ( about to get it) and I have a old 9335 on the throttle/brake wich isn't capable of braking hard enough in my old MP-5 and the front I have a BLS452 for the steering wich respond very well. Now, I want to buy another , more updated servo but I'm not sure what model to have using together with the BLS452. BLS452 specs: Torque: 6V: 194.5 oz-in Speed: 6V .14 sec/60 degrees $99 [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/fut/futm0553.jpg[/image] I have these three choices in mind (between budget & performance) and not sure wich would be the best to join the BLS452 and NOT sure wich fit in the steering or accel/brake location...any combo suggestion? [b]Futaba S9350 Digital High Torque Servo[/b] Torque: 139 oz-in @ 6V Speed: 12 Sec/60 Degrees @ 6.0V $109.99 This one has metal case wich acts like a heat sink [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/fut/futm0235.jpg[/image] [b]BLS351 Brushless Hi-Torque Servo[/b] Torque: 6.0V: 217 oz-in Speed: 6.0V 0.13 sec $129.99 [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/fut/futm0551.jpg[/image] [b]S9351 Digital High Torque Servo[/b] This one also comes with metal case wich acts as heat sink Speed: .13 sec/60° @ 6.0V Torque: 192 oz-in @ 6V $119.99 [image]http://c0456141.cdn.cloudfiles.rackspacecloud.com/images/large/fut/futm0236.jpg[/image] [size=2][b]I'm using a Futaba 3PK 2.4Ghz with NiMH 6v @ 1600 mAh battery.[/b][/size] Thanks
Posted on: 5/3/2010 1:56 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9706061

Toronero .21 vs JP B5-n .21 !!
Hey guys! I was wondering what would be a best purchase between this two bad boys. As well if someone has feedback on them. I pretend to use any of these two engine in my Mugen MBX6 1/8th buggy, the track is more technical, like 80% of it it's turns, jumps, holes, etc, just a simple stright line that is not that big. Also, a buddy of mine who has the Toronero reported to achieve about 10:40 mins of gas with a 6mm venturi! Not sure how does the JP B5n comapre with fuel comsuption in the same area/driving style against the Toronero. http://www.jpracing.com/en/products/fx-engines/Eagle_21_B-5.php [image]http://www.jpracing.com/img/products/fx/moteurs/micro-moteur/Eagle_21_B-5.jpg[/image] What's the special thing with the red stuff? [image]http://www.jpracing.com/img/products/fx/moteurs/vilebrequin/Eagle_21_B-5.jpg[/image] http://www.novarossi.it/eng/products/engines/nova/off-road/specs.php?name=TORO NERO .21 TEAM&brand=nova [image]http://www.novarossi.it/images/public/img_products/engines-nova/587x412/toronero21team.png[/image] [image]http://www.novarossi.it/images/public/img_products/spareparts/groot/15068.jpg[/image] Thanks
Posted on: 3/30/2010 1:47 PM by Author "TurboBimmer" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9624455

RE: Oh Boy! What on Earth is this Ofna 1/8 Buggy?
No offense, but if that is the old Ofna Ultra model, is JUNK! Back days when the MP-5 was new in the market and I had it, my friends had these Ultra's and always the parts were breaking, the metal pieces are jsut crapp, they wear out so fast! That car is OK for bashing or palyin garround of corse, nothing else.
Posted on: 12/1/2009 9:01 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9296107

Looking for a new clutch setup! Recomendations?
Hey guys, I'm trying to figure what brand/model for complete clutch system go, of corse, new flyhweel , etc. I have a Kysoho Mp6 for now, but looking ot update my old car with a MP9 soon. What are the main difference between carbon and ergal shoes? Wich is more reliable and las longer? Pros/Cons? What is best, 3 puck, 4 puck or even 5 puck style (shoes) ? Pros/Cons of each? Anyone ever tried the Fioroni 3, 4 or even the Penta clutch? The 3 shoes model is adjutable, but not sure if with all thi fancy adjustable thing rather than changing the springs, coudl fail faster or is less reliable? Is for a .21 engine [image]http://www.fioroni.com/contenuti/catalogo/articoli/OT-FR104.jpg[/image] [image]http://www.fioroni.com/contenuti/catalogo/articoli/OT-FR105.jpg[/image] Thanks
Posted on: 11/30/2009 4:33 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9292654

RE: Where to get corrugated tube for track?
Thanks guys! Seems I will have to check locally for this pipe then, and TommyGun32 it's right, I will need a full container to bring that stuff over here wich is pretty damn expensive! I'm going to cehck with some fisher companies and farm companies to see if they carry any type of 4" flex pipe that could work. Already hard to find, but not impossible. We shall see what it ends.
Posted on: 10/8/2009 5:31 PM by Author "TurboBimmer" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9157120

RE: Where to get corrugated tube for track?
Thanks guys! Lowes doesn't show prices dammit! [:@] I will keep searching.
Posted on: 10/7/2009 7:53 PM by Author "TurboBimmer" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9154879

RE: Where to get corrugated tube for track?
I called some companies locally that could carry this kind of tube, even distributors, but all I can get is 3" and we need 4" actually. The only one that could have perhaps id the telephone company, but it must be impossible to get that thing from them, therefore, trying to locate a suppplier in the U.S. an dimport it if it's necesary.
Posted on: 10/7/2009 12:33 AM by Author "TurboBimmer" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9152915

Where to get corrugated tube for track?
Hey guys, where is a good source to get 4" inch corrugated tube for the track, it's for our 1/8 gas powered buggys mainly. I'm trying to find places with good prices and can't find. In USA of corse. Thanks for any tip!
Posted on: 10/7/2009 12:14 AM by Author "TurboBimmer" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9152886

RE: Kyosho MP9 Competition vs MP9 Std.
Looks like I missed it! Thanks
Posted on: 8/26/2009 9:44 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9048017

Kyosho MP9 Competition vs MP9 Std.
Hello guys, I'm tempted to buy a new kit of MP9 and checking the prices I'm not sure if worth te extra cash for the competition model. Does someone knows what are the main differences between the STD and Competition model? Thanks
Posted on: 8/25/2009 9:35 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9045119

MP9 Std vs Competition
Hello guys, I'm tempted to buy a new kit of MP9 and checking the prices I'm not sure if worth te extra cash for the competition model. Does someone knows what are the main differences between the STD and Competition model? Thanks
Posted on: 8/24/2009 10:30 AM by Author "TurboBimmer" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9040189

RE: Wheel fitment....
Awesome! looks like they "standarised" the wheel fitmen unlike 8-9 years back when I was active in this hobbie. Thanks
Posted on: 7/30/2009 8:24 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8977398

Wheel fitment....
Hey guys, what wheels are common to swapp between models, say I have D8, MBX6 or MP9, can you run the same tire-wheel combo on these three models or the wheel bolt pattern are different? Just trying to figure this out since I don't have any of these models next to me to check it out. Thanks
Posted on: 7/30/2009 7:06 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8977209

RE: Bevel gears design?
Wonder why Kyosho MP9 being a well known brand in bugy nitro scene didn't go this route!?
Posted on: 7/30/2009 5:11 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8976973

Bevel gears design?
Hey guys, I was looking the MP9 bevel gear design and it's pretty much the same design (stright teeths) as my old MP-5, the Mugen MBX6 however are helicoildal (sp?) design, wich me thinks is better for smootheness and overall work but I coul dbe wrong. Any advenatge or cons of each systems? Thanks MP9 [image]http://i24.ebayimg.com/02/i/001/38/f5/2233_12.JPG[/image] Mugen MBX6 [image]http://i22.ebayimg.com/05/i/001/15/be/0f4b_12.JPG[/image]
Posted on: 7/30/2009 12:34 AM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8975493

RE: Where to buy Kyosho MP-5 parts?
Thanks!
Posted on: 5/28/2009 6:38 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8806971

Where to buy Kyosho MP-5 parts?
Blew up my attack pinion and would like to buy a new set of ring-pinion for my MP-5! Any info very appreciated. Thanks
Posted on: 5/24/2009 9:16 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8795491

RE: Will this batterie work on Futaba 3PJ?
Thanks Steve. Yes, I always use some rubber or just a support inside to prevent the battery rattling inside.
Posted on: 5/14/2009 7:57 PM by Author "TurboBimmer" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8769521

What Kyosho is this one and...
what could worth judging by the pics? Is a Kanai version, I guess it belong to a 7.5 or 777 ? Comes with all shown in the pics. [image]http://pic90.picturetrail.com/VOL2150/901978/7878437/360715538.jpg[/image] [image]http://pic90.picturetrail.com/VOL2150/901978/7878437/360715465.jpg[/image] [image]http://pic90.picturetrail.com/VOL2150/901978/7878437/360715525.jpg[/image]
Posted on: 5/14/2009 1:23 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8768570

RE: Turbo plug or non Turbo plug?
Wonder if it's the combustion chamber different or just the plug.
Posted on: 5/13/2009 12:08 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8765573

RE: identify this buggy please!!!
I'm most likely certain it's a Sinying or sort of that name because I remember few of those in 99-00 years when I was active runing buggys and some dudes bought these buggys, but basically due the fuel tank position and thos "plastic" white brake discs that are in front of the diff.....I bet is that brand I mention.
Posted on: 5/12/2009 8:01 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8763790

RE: Looking for a new engine (O.S. , RB or Novarossi)
Thanks! Yeah I'm keeping my RB and ordering the kit above mentioned to have a refreshed S7. I just spoked to a friend of mine that bought recently the Toro and we will see how it goes.
Posted on: 5/12/2009 7:51 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8763764

Turbo plug or non Turbo plug?
Back in the old days when the turbo plug was recently launched in the market in 98-99 if I remember correctly was the ultimate performance for certain engines, however these engine that came with turbo plugs, known as engines for racing and not just regular practice, gave some little headaches tuning them and they weren't that reliable as STD plugs at least for me. Todays I see the turbo plug arrived in the Buggy scene and is offered by O.S. engines as well. I would like to know what are the CONS and PROS of the Turbo Plug vs a non Turbo Plug since some engines does offer this option before buying it. Thanks
Posted on: 5/12/2009 5:55 PM by Author "TurboBimmer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=8763441

Will this batterie work on Futaba 3PJ?
Hello guys, I want to replace my battery pack for my Futaba 3PJ radio and was wondering if this battery will fit. The connector doesn't care, I can swapp it easy. Otherwise if someone could point me a web where offer the direct bolt on battery pack for my radio. Thanks http://www.all-battery.com/96v2300mahnimhtxtransmitterbatterypacksforrcmx-3nt8jyfutaba4nblbfbpairplanesandcars.aspx
Posted on: 5/12/2009 5:51 PM by Author "TurboBimmer" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8763427