RE: Search ideas of assemblage scorpion ADJets
Hi Fritz! You have forgotten to show here such photo![;)] I wish to thank it the person, in past Fritz helped in online to collect a mode Super Scorpion! Once again thanks Fritz! Alex
Posted on: 11/18/2009 5:36 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9262207

RE: 1 x MiG
Jury, Pipes it is necessary? There are no problems, will make! landing gear are necessary? There are no problems, will help your project! ��ШИ ВЕЗДЕ!!![sm=bananahead.gif] Alex[;)]
Posted on: 11/13/2009 2:27 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9251250

RE: 1 x MiG
Привет Юра![;)] We will attentively observe of your project! Very interestingly!!![:-] Aleх. Ukraine.
Posted on: 11/13/2009 9:34 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9250669

RE: 4.5m Eurosport..wow!
GOOOD![sm=spinnyeyes.gif]
Posted on: 10/30/2009 7:26 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9214529

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
To wish of the client, we can give full "the Package of documents" for participation in competitions "World championship"! We assembled these drawings and many photos - 10 years! [:-]
Posted on: 10/26/2009 4:07 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9202469

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
Countryboy, If to be more exact - 8658$. But this price includes completely the ready plane (assembled)! If you want, in addition we can establish electronics. You only need to establish turbines... Alex
Posted on: 10/26/2009 3:46 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9202454

RE: Tamjet Pipes?
George, I have made calculation of weight of yours Pipes! You Pipes should weigh ~ 10.58 ounces (300 gramme)...[8D]
Posted on: 10/24/2009 8:25 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9198010

RE: Tamjet Pipes?
[quote]ORIGINAL: aquaskiman Are Tamjets pipes lighter than Skymaster pipes? If so by how much. I have a 1/6.5 F-86 and the pipe weighs 12.6 oz. It is coming out tail heavy and would like to reduce some weight in back. Thanks George [/quote] George, What length of yours Pipes? I can probably count real weight Pipes! (What turbine at you) Thanks. Alex
Posted on: 10/23/2009 1:23 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9196205

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
If you praise me, Then I will show you some more photo![8|] Enthusiasm - full trousers (at us so speak).[;)] Thanks Friends!
Posted on: 10/23/2009 12:57 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9196139

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
It is a little more photo![:D]
Posted on: 10/23/2009 8:14 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9195522

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
New plane Mig-29 KUB. Some new photos. There is a spadework to painting.[8|]
Posted on: 10/23/2009 6:35 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9195398

RE: 1:3.7 Pilatus PC21 turboprop build
Very much, very much impresses![;)]
Posted on: 10/21/2009 1:07 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9190922

RE: UKR-JET pipe recieved
[quote]ORIGINAL: Gordon Mc 'scuse the ignorance here, but I'm a bit confused. You say there are no spot welds on the inner pipe - so what are the spots in this pic ? Note - this isn't an attempt at being sarcastic - I'm genuinely a bit befuddled. I though these pipes were to have no spot welds and all be just laser welding, but form the pic's I see a bunch of pop rivets plus what seems to be spot welding. Could you clarify ? Thanks, Gordon [/quote] I can explain to you! At first we have welded Pipes - laser welding after that we have in addition welded "points". You ask why there is a welding by "point"? I give the explanatory: to us has sent the Pipes Andy, we have made tests with this Pipes and we have found out some errors! 1. A design error (have not correctly made a design). 2. We have made calculation of this pipes, we have come to opinion that this tube is calculated on turbine MAX application - 90-120N. And Andy, uses the turbine with pressure 160N. This Pipes very narrow for such turbine - (rear Pipes very narrow 76 mm 2.99"). The minimum diameter of a tube should be - 85mm 3.34"! But how I could not increase exhaust outlet Pipes, I have decided to make "secure by spot welding". If to tell easier, I should not leave from the sizes Pipes which to me have sent Andy, I have been limited in the project of this Pipes! Therefore, I can give 100 % guarantee Andy that it Pipes will not be damaged and there will be no rupture! Laser welding + welding by a point - and we have very strong tube, especially for wet starts! The additional information on Pipes Andy, Pipes which uses Andy it is very strongly loaded by pressure in rear Pipes... As I wrote above, an exhaust outlet too small, and the temperature reaches 490 degrees (932F). I think that additional points on a tube should not confuse my users. But it is better to have a stock on strength! And it will give 100 % confidence of reliability Pipes! Though we can not do welding by a point, there is enough only a laser seam. Forgive for my English.... If you need to make a new explanation, please contact with Marc Scully, I think it can describe our tests in detail![8|]
Posted on: 10/16/2009 1:20 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9177208

RE: UKR-JET pipe recieved
[quote]ORIGINAL: AndyAndrews After first run (full tank) the pipe looks excellent. Not a single warp or blemish. I will keep an eye on it and post pics after the next flight. [/quote] Andy, Thanks for mail! To yours Pipes will occur nothing! Internal circuit Pipes is made of a special steel. I will a little tell as do this steel. After manufacturing of sheet SS (industrially), this sheet press (a press, very strong pressure)! After such processing sheet SS turns out very strong and elastic (it is very similar to a spring). We did many tests, heated up ours pipes to temperature of 700 degrees (1292F)!!! [sm=spinnyeyes.gif]And we did not see any deformation... Andy, Continue us to inform on your flights. Thanks![sm=wink_smile.gif]
Posted on: 10/16/2009 12:04 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9177047

RE: NEW Mig-35 (sea aircraft)
(with the suspended weapon) 5677 euro. You can see all information on our site. http://ukr-jet.com.ua
Posted on: 10/12/2009 7:19 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9165981

RE: 1:3.7 Pilatus PC21 turboprop build
Super BOMB!!![sm=spinnyeyes.gif]
Posted on: 9/30/2009 7:55 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9136932

RE: What is more important for turbine cooling
Sara Parish correctly speaks! David, specify diameter of "nozzle" of the turbine. Also specify internal diameter of a pipe (bell mouth). I can make calculation....[8D]
Posted on: 9/30/2009 7:47 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9136900

RE: Laser welded jet pipes - see sample @ Jetpower
[quote]ORIGINAL: digitech [quote]ORIGINAL: UKR-Jet Hi Friends! Welded by the laser, it is very difficult to destroy a pipe to (break off). Such pipes very strong! And still: we apply very rare metal, such metal is very difficult for finding... Now such metal is not present anywhere... We have bought this material from old stocks USSR!!![:)] The metal specification: After manufacturing
Posted on: 9/14/2009 7:38 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9094113

RE: Laser welded jet pipes - see sample @ Jetpower
Hi Friends! Welded by the laser, it is very difficult to destroy a pipe to (break off). Such pipes very strong! And still: we apply very rare metal, such metal is very difficult for finding... Now such metal is not present anywhere... We have bought this material from old stocks USSR!!![:)] The metal specification: After manufacturing of such metal (factory the manufacturer), presses it, and metal gets the big rigidity. Metal is similar to an elastic steel (as a spring)! To this metal 22 years... Friends, ask any questions, we will give you answers![8D]
Posted on: 9/14/2009 5:53 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9094012

RE: New pipes being developed by UKR-JETS
[quote]ORIGINAL: HeavyMo DrDoom, with all respect, there is more to this than pipes. Marty Cowan is a great guy to deal with and with RCU for a long time ... and I think it is reasonable to have his question answered . [/quote] Marty - will receive the answer.... But in other line - http://www.rcuniverse.com/forum/m_9030641/anchors_9039725/mpage_1/key_/anchor/tm.htm#9039725 Alex
Posted on: 8/31/2009 4:36 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9059466

RE: Who know this plane from UKR JET ?
[quote]ORIGINAL: jeanfi Hello guys, I have just have a look here [link]http://ukr-jet.com.ua/index.php?name=content&op=view&id=19[/link] Do you know this plane ? And doe sanyone can help me to have more informations on this nice kit ? I don't speak and read russian language. Thanks JeanFi [:D] [/quote] Hi JeanFi! On a site there is an English version! http://ukr-jet.com.ua/index.php
Posted on: 8/30/2009 6:27 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9055982

RE: FLy Eagle Jet Models
distinctions..... http://ukr-jet.com.ua/index.php?name=content&op=view&id=25 Alex
Posted on: 8/29/2009 3:43 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9054635

RE: New pipes being developed by UKR-JETS
I was afraid revolution!;) Awake in Ukraine, write to me, we will drink vodka!;)[;)] How yours ME? You have collected it? Alex
Posted on: 8/28/2009 2:26 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9052256

RE: New pipes being developed by UKR-JETS
Mark, Your pipe is ready! We have made very rigid and strong design.... Alex
Posted on: 8/28/2009 10:01 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9051654

RE: New pipes being developed by UKR-JETS
Andy, Your pipe is ready, We have made to you a pipe of a new design... External contour made from - aluminium... Aluminium is cooled in 27 times is better and faster...[:D] We have made many tests....
Posted on: 8/28/2009 9:55 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9051641

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
Billy, YAK-15 It will be ready to sale in 2010 (July - August) In total it will be made, 15-20 planes (the limited version) "the GOLD COLLECTION" Russian planes! Alex
Posted on: 8/24/2009 4:56 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9039725

UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
[color=#000033]Coming soon!!! You can see on sale planes: "UKR-JET" - MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15. [/color] http://ukr-jet.com.ua/index.php?name=content&op=view&id=23 Alex
Posted on: 8/20/2009 10:21 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9030641

RE: Jet-Cat SUB NANO???
, In this case, the price does not matter! Jet Cat wishes to make the smallest turbine! It is less
Posted on: 8/20/2009 8:20 AM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9030372

Jet-Cat SUB NANO???
Who knows the information??? Jet-Cat Does Sub Nano (micro) the smallest turbine.....? Espionage hearings![;)] Alex
Posted on: 8/19/2009 4:22 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9028756

RE: 1:3.7 Pilatus PC21 turboprop build
Marc, Continue to show plane assemblage! Very much impresses! Thanks![;)] Alex
Posted on: 8/19/2009 12:45 PM by Author "UKR-Jet" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9028281