|
RE: LiPo sources
bullets pre installed. I will use these packs in calm weather. Velco
Posted on: 6/6/2013 1:39 PM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11535467
RE: new battery questions
I am charging and discharging at 0.5C for 5 times. Is this OK, especially for discharging? Will this "wake" the chemistry of the battery? cheers
Posted on: 5/23/2013 11:56 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11520409
RE: BJ Craft - Nuance 120
), some 145g per pack less than Rhinos 4900! Hope this helps, Velco
Posted on: 5/18/2013 4:22 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11514285
RE: Sebart Wind 110
I had a Scorpion 4035-250 in my plane on 10S and 17x10 TLE prop and it did not last very long, magnets unglued. After that I have put AXI 5220 249kV and currently I am spinning an 18x10 TLE but I think it can take an 18x12 XOAR. Rear support or norear support that motor is a crap. Velco
Posted on: 7/12/2012 1:53 PM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11152953
RE: Sebart Wind 110
Mine is solid as a rock at 4,5kg. I will shave 100g just by removing the lead from the back and by using a 600mAh RX batt instead of 1000mAh batt. Velco
Posted on: 5/11/2012 11:51 PM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11077727
RE: ESM FW D-9
Hope this can help http://www.troybuiltmodels.com/ns/manuals/ESMFW190D9-83AAF.pdf Velco
Posted on: 5/9/2012 12:50 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11073866
RE: Sebart Wind 110
[quote]ORIGINAL: gaRCfield Velco, what are you using for batteries? I found that my 10S 4000mah packs weight less than my 8S 5000mah packs, so 10S can theoretically be lighter for the same power and flight time since we use less current that way. [/quote] I am using Rhinos 4900, so pretty heavy for a total of 1270g. About what you say for 10S vs 8S you are absolutely right. Velco
Posted on: 5/9/2012 12:48 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11073863
RE: Sebart Wind 110
With the rudder servo in the back a correct CG can be achieved even on 10S without adding any lead. I know because I had to ad some 60g of lead at the back to balance the plane correctly. I will move the servo back very soon. Velco
Posted on: 5/8/2012 9:36 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11073048
RE: Sebart Wind 110
I have to admit that stock combo is really the best choice for this bird, the only minus is that it is 8S. Still, I am absolutely happy with my AXI 5320/28 on 10S and 18x10. Still, on 18x12 it would be ideal, just would be pushing the motor a bit too much, have to get me a XOAR 18x12, they are a bit less power hungry. Velco
Posted on: 5/7/2012 10:02 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11026179
RE: ESM FW D-9
of yours, one seems to be faulty ! Velco
Posted on: 4/13/2012 8:54 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11040252
RE: ESM FW D-9
? Me certainly not. Just my 5 cent. Velco
Posted on: 4/6/2012 7:23 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11030581
RE: ESM FW D-9
with 20x8 and move on to 20x10 or 19x10. Velco
Posted on: 4/5/2012 12:42 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11028368
RE: ESM FW D-9
[quote]ORIGINAL: kahloq [quote]ORIGINAL: Velco I have never said that APC E props are the best, I just said that they are good as a benchmark. There are props with better performance... performing and probably some 5% less power demanding from APC Velco [/quote] I was not stating you said APC-e... of view everything else would be just a waste of energy. Velco
Posted on: 4/3/2012 12:49 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11026945
RE: ESM FW D-9
. Velco
Posted on: 4/3/2012 12:02 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11026764
RE: ESM FW D-9
can be considered as ideal. I am considering this combo also for my self. Velco
Posted on: 4/3/2012 12:38 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11026178
RE: ESM FW D-9
[quote]ORIGINAL: kahloq [quote]ORIGINAL: Velco . As there is no good Do 335 thread (at least I could not find it) I have some interesting options for that modell too as I consider the suggested 2...? Some pro and contra from the filed would be nice. Velco [/quote] Ummm.... there is definitely a good..., will look into it as it is another very interesting plane. Velco
Posted on: 3/13/2012 12:36 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10998710
RE: ESM FW D-9
[quote]ORIGINAL: Corsair 29 [quote]ORIGINAL: Velco After talking a bit to Mirce I figured out that 50% more static from flying weight is really not necessary so I have come up with one more interesting solution for Rim 65cc on 12S (or any other motor with kV around 170 like AXI 5345/18) which... from the filed would be nice. Velco
Posted on: 3/12/2012 2:24 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10997384
RE: ESM FW D-9
. Velco Edit: I went to XOAR website to check once again and XOAR PJN Beecwood series do look
Posted on: 3/11/2012 3:45 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10993825
RE: ESM FW D-9
:). Velco
Posted on: 3/11/2012 1:12 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10995074
RE: ESM FW D-9
and have really learned how to obtain a reliable maximum necessary for almost any type of plane. Velco
Posted on: 3/10/2012 9:02 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10992967
RE: ESM FW D-9
of the intake rather than not have the exhaust big enough! Velco
Posted on: 3/10/2012 5:56 AM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10993252
RE: ESM FW D-9
in more detail some theory and practice how prop choice differs from gas to electric. Velco
Posted on: 3/9/2012 3:02 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10993364
RE: ESM FW D-9
Thanks Doug! I can see that you have made some additional holes in the firewall I presume for battery and electronics cooling. Where did you put the air exaust? Velco
Posted on: 3/9/2012 12:21 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10993196
RE: ESM FW D-9
will try to organize this year a local Top Gun. We are a small but growing RC community :). Velco
Posted on: 3/8/2012 11:17 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10991809
RE: ESM FW D-9
is making, great stuff. Velco
Posted on: 3/8/2012 1:40 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10991047
RE: ESM FW D-9
://www.benedini.de/Home_E/Products_E/products_e.html and they have FW sounds in their library! Velco
Posted on: 3/8/2012 1:16 PM by Author "Velco"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10991665
RE: Sebart's new pattern ship MYTHOS
new entries in the "balsa 2x2 F3A" segment. Velco
Posted on: 2/18/2012 10:59 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10964650
RE: Sebart Wind 110
That Scorpion will not last long at those power levels. Mine died at mere 2kW. And for the correct airflow, ratio between in and out holes should be at least1:3 ! Velco
Posted on: 11/26/2011 11:14 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10829916
RE: Sebart Wind 110
[quote]ORIGINAL: Hans S [quote]ORIGINAL: Velco I will continue with my explanations because some extra job was also required on the prop adapter as I could not use the one Axi originally supplied. I wil explain exactly what had to be done once I am back. [/quote] Hi Velco, I´m very interessted... the unmodified adapter if necessary. Velco
Posted on: 10/27/2011 3:10 PM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10785572
RE: Monolog 110
Reminds me very much of Fliton Inspire 90 which was a good flying plane. There are some new motors at HK like the new SK3 series that would make a super cheap combo and for 500$ this would be hard to beat! Velco
Posted on: 10/25/2011 1:21 AM by Author "Velco"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10781320
| 
