RE: Info on Midwest AT-6 Please
Thanks guys! This is perfect! -Greg
Posted on: 7/29/2012 5:00 AM by Author "WGRoper" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11173088

Info on Midwest AT-6 Please
I'm looking for some setup information on a Midwest Texan. I picked this plane up at the Southeastern Model Expo show back in 2006 or so and haven't really flown it yet. I made an attempt to fly it and I suspect the C.G., incidence and thrust are a bit off. I've got the construction manual which details the recommended control throws, but I don't have the plans and the C.G. and thrust line is documented on them. I contacted Midwest to see if I could order a set of the plans, but they've closed the plane division and don't have the plans available. I'd gladly pay to have a set copied if possible. If you have a Texan, can you help me out? Thanks! Greg
Posted on: 7/28/2012 7:24 PM by Author "WGRoper" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11172761

Are you going to Perry?
If you are, come by my table (W-78) in the Miller-Murphy-Howard building, say you saw this on RCU and get a free 1" tall vinyl decal! You can choose either your AMA number or "Pilot: YOUR NAME" in any solid color. I'll have carbon fiber printed film as well, but I can't give that stuff away :D I've got red, blue, black, white, yellow, green, lime green, purple, brown, gold, silver, orange, pink, burgundy, and carbon fiber. See ya there! Greg
Posted on: 3/3/2011 5:20 AM by Author "WGRoper" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10376158

RE: GAMA Swap meet Perry GA
[quote]ORIGINAL: F.Ciccarello [size=2][/size]Well guy's it's Perry time.......I'll have mostly electric planes this year to sell... I have one Kondor models P-38 the red YIPPEE. airframe with robart retracts.... nice twin for someone. not me..I'll be there Thursday around 3:00 pm.. see ya there. Miller Murphy Howard building tables U and V -8. [/quote] Hey neighbor! I've got the block of tables next to you for our club members. I'll be close by with my vinyl cutter at W-78. Can't wait to see that P-38. -Greg
Posted on: 3/1/2011 12:17 PM by Author "WGRoper" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10372363

RE: Perry Swap Meet - Work Stand Prototype - Pics attached
Looks really good! I'd like to see one in person, I'll be looking you up at the show.
Posted on: 2/27/2011 7:47 PM by Author "WGRoper" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10368684

RE: GAMA Swap meet Perry GA
I'm heading down from north of Atlanta early Friday morning. I've got a vinyl cutting machine and will be cutting lettering/graphics on site for both days. I've got 15 different colors as of now including some cool carbon fiber metallized film that will look really good on some of the giant scale aerobats. See ya in the Miller-Murphy-Howard building at table W-78. -Greg
Posted on: 2/21/2011 5:48 AM by Author "WGRoper" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10352185

RE: Perry Swap Meet - Work Stand Prototype - Pics attached
I'll be there in the Miller-Murphy-Howard building cutting custom vinyl graphics on site. If you make it down, bring one of your kits over to my table (W-78), I'll be glad to send folks your way. Maybe you can do the same for me. -Greg
Posted on: 2/20/2011 5:23 PM by Author "WGRoper" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10351203

RE: Old R/C Modeler Magazines to give away*
I suppose I missed out on the #3-1987 issue already. I bought a nice Mockingbird at the SE Model Expo yesterday and would like to get a hold of the original article. The fella I purchased it from supplied a copy of the plans page and a few pages from the aritcle, but I'd like to have the complete article. I'll gladly pay to get a copy, either mailed or a PDF of the article. Thanks! Greg
Posted on: 3/8/2009 12:19 PM by Author "WGRoper" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8555874

Royal PA-18 Plans Needed
I picked up a very nice 1/4 scale Royal PA-18 this past weekend at the SE Model Expo in Perry, GA. I'd like to get my hands on the plans for this kit if possible. Please contact me at greg.roper "AT" comcast.net if you have a set you'd be willing to sell or otherwise. Thanks! Greg
Posted on: 3/2/2008 1:33 PM by Author "WGRoper" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=7165727

RE: Midwest AT-6
I'd be glad to. It may take a few days, but I'll make a few pics and send them to you. I've also got some pics from another RCU member of his flap setup during construction.
Posted on: 8/8/2007 10:07 PM by Author "WGRoper" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=6214162

RE: CKModels Edge 540 26cc
I bought one of the 26cc gas engines from these guys at the SE Model Expo in Perry, Ga. last weekend. This is my first gasser and I was a little nervous about buying it since I couldn't find any info on it on the web. Although I haven't ran the engine yet, so far the customer service has been excellent. I called Vernon on Monday afternoon to inquire about prop recommendations for the engine. After leaving a voice mail, I figured I might hear back in a day or two. He called me back within 5 minutes! I'll report back here once I get the engine mounted and running and let ya'll know what I think about it.
Posted on: 3/7/2007 7:14 AM by Author "WGRoper" in the forum "Product Announcements & Manufacturer News"
http://www.rcuniverse.com/forum/fb.asp?m=5523806

RE: Ohio R/C 80" Edge Profile???
All I know is the guy was advertising it as an Ohio R/C kit. Beats me. Thanks for the replies!
Posted on: 3/6/2007 7:36 PM by Author "WGRoper" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5521399

RE: Ohio R/C 80" Edge Profile???
It's pretty sweet, even though it's PINK! Where's the CG on yours? That's the main thing he wants to know. He'd like to know the recommended control throws, but that's not a huge deal. He should have it in the air this weekend. The O.S. BGX should tote it around nicely. He's considering switching it to gas in the future. He's trying to get away from glow.
Posted on: 3/6/2007 9:46 AM by Author "WGRoper" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5518664

RE: Ohio R/C 80" Edge Profile???
Saw that, it appears to be very similar, but not exactly the same. Maybe they took the basic design and modified it slightly? The wing attachment is totally different. Each wing panel is 36" long, so there's about 3.5" of airfoil built into the fuse, if that makes sense.
Posted on: 3/5/2007 6:56 PM by Author "WGRoper" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5515732

Ohio R/C 80" Edge Profile???
A buddy of mine bought a sweet Ohio R/C Edge 540 at the SE Model Expo in Perry, GA. this past weekend. Apparently, the mfg has gone out of business. Anyone have any specs on this bird?
Posted on: 3/5/2007 5:29 PM by Author "WGRoper" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5515249

RE: The new electric YAK 54 from Greatplanes!
I'm glueing the wings on mine as we...er...speak. What a pain that is. It's very hard to get the wings straight and level. I've got them clamped per the instructions, but that left them out of alignment with the fuselage from front to back. I've got rubber bands holding everthing down for the time being. We'll see how they look in an hour or so, then I'll move on to the empenage. -Greg
Posted on: 2/9/2007 8:57 AM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5392975

RE: Great Planes 41" YAK 54 Elevator Issues
My motor box parts appear to be straight, no noticeable warp at all. Time will tell as I began assembly.
Posted on: 2/6/2007 6:07 PM by Author "WGRoper" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=5380749

RE: Great Planes 41" YAK 54 Elevator Issues
I haven't looked at the motor mount parts in mine yet. I've got it all spread out on the bench and ready to begin assembly, so I'll try to make a point of inspecting those parts this evening and I'll report back here.
Posted on: 2/6/2007 11:12 AM by Author "WGRoper" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=5378899

RE: Great Planes 41" YAK 54 Elevator Issues
I picked up some CF strips for mine h-stab last night. I hope to start assembly sometime this week.
Posted on: 2/4/2007 4:03 PM by Author "WGRoper" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=5370470

RE: The new electric YAK 54 from Greatplanes!
Well, I got an email from Tower last night saying my backordered Yak has been shipped! I expect it to be delivered Tuesday or so. I'll let ya'll know how it looks when I, maybe they've taken steps to correct the h-stab issues.
Posted on: 1/19/2007 7:15 AM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5288835

RE: Great Planes 41" YAK 54 Elevator Issues
Got an email that mine shipped yesterday! Sweet.
Posted on: 1/19/2007 7:13 AM by Author "WGRoper" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=5288831

RE: Great Planes 41" YAK 54 Elevator Issues
Me too. Same deal. I expected it to be delayed. Everything I've ever back ordered from Tower gets delayed.
Posted on: 1/17/2007 6:26 PM by Author "WGRoper" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=5281194

RE: The new electric YAK 54 from Greatplanes!
Just checked the status on my back order of the Yak from Tower. It's now saying mid-February instead of Late January. Told ya.
Posted on: 1/17/2007 3:20 PM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5280244

RE: The new electric YAK 54 from Greatplanes!
Ordered my Yak and the Rimfire 1450 with a 35A ESC today. Tower baited me with a $30 off $149 or more order, and I bit. It's backordered till the end of January (ready sometime in late Feb per Tower standards), but I've got plenty to work on between now and then.
Posted on: 1/4/2007 6:20 PM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5210556

RE: Need motor/esc rec for GP EP Yak 54
Hey haz, how are you measuring the draw. I.E. do you have a wattmeter or are you using a vm? Just curious, I think I need to get a rig together to test my e-flight setups. What do you recommend?
Posted on: 1/2/2007 8:07 PM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5199613

RE: Need motor/esc rec for GP EP Yak 54
I think you'll need a 35A ESC to be safe.
Posted on: 1/2/2007 11:24 AM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5196910

RE: The new electric YAK 54 from Greatplanes!
Those parts may not have a place on the Yak. The parts tree is probably generic enough that GP uses it with several other kits as well. I don't have the Yak (yet...), but I've had a couple of their flatout kits and always had extra parts left over.
Posted on: 12/25/2006 2:49 PM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5159879

RE: The new electric YAK 54 from Greatplanes!
Well, after all that.... I'm going to power mine with the 1250. I generally overpower my planes, but then again, I practice throttle management. I just like having the extra oomp there if I need it.
Posted on: 12/22/2006 3:00 PM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5148830

RE: Need motor/esc rec for GP EP Yak 54
Thanks for the info. I saw that on the other GP Yak thread today as well. I might go with the Hacker, but if the 1250 does the job just as well, I'm satisfied as it'll be a bolt on installation on this plane. BTW, what kind of test rig are you using to test motors and props? I might want to set up the same thing for me and my club buddies. -Greg
Posted on: 12/18/2006 12:45 PM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5130746

RE: Need motor/esc rec for GP EP Yak 54
Thanks for the info. That's what I need. Do you have any idea how much thrust your are getting out of that setup? What's your all-up configuration weigh? -Greg
Posted on: 12/15/2006 11:16 AM by Author "WGRoper" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5119403