|
RE: DA 50-R wont rev...
[color=#9900FF]CALL DA.... They might surprize you They stand behind their older motors even if you are NOT the first owner[/color]
Posted on: 11/20/2009 10:41 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9267440
RE: o.s. 160fx starter
[quote]ORIGINAL: w8ye I was watching a video made in Hawaii last night and a guy started his Saito 220 gas engine with the Magnum geared starter http://www.hobbypeople.net/gallery/237960.asp <img border=''0'' align=''ABSMIDDLE'' alt=''Magnum Starter - Torque Drive, 12v DC - Up to 1.80 engines - Item No. 237960'' src=''http://graphics.hobbypeople.net/gallery/237960.jpg'' /> [/quote] [color=#CC00FF] Over the years when I have had large glow and smaller gas motors giving me a hard time starting: I have a "MAGNUM STARTER" like above (not a high priced starter) and hooked up to TWO 12vdc car batteries...(24vdc) [b]Needless to say it WORKS GREAT and still have NOT burned the thing out[/b].....[:)] [/color]
Posted on: 11/19/2009 10:17 AM by Author "Walt and Sage"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9264958
RE: 3W55xiCS
[color=#CC00FF] Hi My Friend and WELCOME to our little Forum....[:D] If I were you at the point you are at, I would locate some local help on GAS planes... If you have not flown GAS there will be MANY MORE questions.. Locate help from your club or locate one at the AMA website... If you rather just ask here, we certainly try to answer your questions the best we can... Walt [/color]
Posted on: 11/17/2009 10:19 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9259965
RE: 55 cc engine
[center][color=#FF00FF]GREAT PROJECT !!! It will be the BLACKFOOT 55cc ????....[;)][/color][/center]
Posted on: 10/31/2009 11:14 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9214901
RE: Fuel Line?
[center][size=6][/size][color=#FF9900][b]I placed an order today, THANKs [/b][:D][/color][/center]
Posted on: 10/31/2009 11:04 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9215034
RE: Fuel Line?
[center][color=#9900FF]THANK YOU for the info... THREE feet can do a number of tanks...[:D] I am going to try some.... [/color][/center]
Posted on: 10/30/2009 11:29 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9214952
RE: guys in Cuba fliying funfly
[center][size=3][color=#FF0000]Them Guys need to join the Profile Brotherhood....[:D][/color][/size][/center]
Posted on: 10/30/2009 11:02 AM by Author "Walt and Sage"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9214877
RE: DLE engine
[quote]ORIGINAL: gboulton Valley View RC. $410 for a DLE 55 and 22x8 prop. Jody is THE best in the business when it comes to DLE. He's regularly available here on RCU, always happy to answer questions before the sale, and has an IMPECCABLE reputation for service after the sale. http://www.valleyviewrc.com/ [/quote] [center][color=#9900FF]I will SECOND that....[:)].... FREE shipping also, I think...[:D][/color][/center]
Posted on: 10/21/2009 12:09 PM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9190804
RE: Big Bore Tygon
[color=#9900FF]YES, I am mostly sure the clunk line has 1/8 th barbs.. I also have 5/32 barbs for larger brass tubing...[/color]
Posted on: 10/15/2009 10:49 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9175118
RE: Support from Jody at Valley View RC
[center][color=#CC00FF]He knows GAS MOTORS inside and OUT !!!!....[:D][/color][/center]
Posted on: 10/13/2009 11:09 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9169468
RE: Big Bore Tygon
[color=#CC00FF]You can also use Dubro fuel line barbs... DO NOT forget the clunk line...[:D][/color] http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWH38 Walt...
Posted on: 10/13/2009 10:58 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9169445
RE: Ignition problem experience
[center][font="Courier New"][color=#FF6600]YES, very NICE...[:)][/color][/font][/center]
Posted on: 10/11/2009 6:27 PM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9164551
RE: AW 50cc YAK 54 build thread
http://www.rcuniverse.com/forum/m_3889514/mpage_6/key_Yak/tm.htm http://www.rcuniverse.com/forum/m_3594376/mpage_34/key_/tm.htm [color=#FF6600][size=3][center][/center] The TOP link has 6 pages The Bottom has 36 pages[/size][/color]
Posted on: 10/8/2009 10:38 AM by Author "Walt and Sage"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9156206
RE: Interference problems
[quote]ORIGINAL: jedijody Put a hose clamp on your spark plug cap. Tighten it onto the hex of the plug until it can't be easily moved around. [/quote] [center][font="Microsoft Sans Serif"][size=6][color=#CC00CC]Right ON Jody !!!!! .....[:D][/color][/size][/font][/center]
Posted on: 10/6/2009 11:36 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9151032
RE: [Deleted]
[color=#FF9900]I am going to stay with Tom and Jody at Valley View....[:)] Walt[/color]
Posted on: 9/28/2009 10:48 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9129760
RE: 6 volt ignition battery for DA50?
SORRY : double post... [:D]
Posted on: 9/8/2009 10:26 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9078513
RE: 6 volt ignition battery for DA50?
[color=#9900FF]For 50cc planes we ose ONE A123 (2300ma or 2500ma) for the entire plane... To be on the safe side we install one IN 4001 diode to the ignition... Works GREAT as we have many plane with this set up.. Walt...[/color]
Posted on: 9/8/2009 10:25 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9078509
RE: Bling 3D 50cc ARF
[quote]ORIGINAL: sergeflavigne I still have a set of Bling wings with ailerons, new in the box $65.00 and I'll pay the shipping in the lower 48. [center][/quote] [color=#FF9900]Thanks, will certainly keep you in mind .....[:)][/color][/center]
Posted on: 8/30/2009 10:26 AM by Author "Walt and Sage"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9056284
RE: Cermark SPE-43
[quote]ORIGINAL: ultra6a I highly recommend replacing the Melody Ignition unit, that comes with the engine, with an RCXL unit. After installing the RCXL ignition check the timing to ensure that it is sparking at 28 degrees before top dead center. I did this after wasting months with two Melody ignitions and associated timing issues. My SPE went from being a pure ''DOG'' to running great. [/quote] [color=#9900FF]When you replaced the ignition did you also have to replace the hall switch ????? I have an eztra RCEXL ignition. The hall switch plug is different but might wire the same???[:D][/color]
Posted on: 8/30/2009 10:19 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9056272
RE: Cermark SPE-43
[color=#FF00FF]No I did not but I am thinking about calling them....[:)][/color]
Posted on: 8/29/2009 11:17 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9054140
RE: help with crrc40
[color=#3300FF]Maybe Jody would credit you for parts and build a new one for you at Valley View....[/color]
Posted on: 8/29/2009 11:09 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9054123
RE: Cermark SPE-43
are flying with the motor so maybe just my luck....[:)] Walt [/color]
Posted on: 8/28/2009 10:52 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9051762
RE: whats your favorite spinner?
[color=#9900FF]I like the spinners from Valley View... The back plates are drilled by Jody for your motor... They LOOK GREAT....[/color][:)]
Posted on: 8/27/2009 10:32 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9049165
RE: PROBLEMS with your GASSER? AREA51 102 , DL 50 , 55 , 110 , CRRC , BME 58 , 110 , DA , ETC ... ???
[color=#9900FF]The worst motor I have delt with is a SPE 43 with that "Melody" ign... I can not get more that 10 lbs of thrust out of it....[:o] Moved the timing + / - and 10lbs is it... think it is the ign Moved on to other things for now...[/color]
Posted on: 8/24/2009 10:22 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9040170
RE: EVOlution 26 AND DA50 Can they run on Amsoil Sbare
[color=#9933FF]I have been using Amsoils 50 to 1 "Dominator" for years now.. Do the break in with Penzoil 32 - 1 My friend uses Sabre at 70 -1 and likes it ... Some have had problems and I think it is trying to run at 100 -1 100-1 anything is not much oil....[:D][/color]
Posted on: 8/24/2009 10:04 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9040122
RE: filling a gasser
WHAT HAPPENED Had to learn this the HARD WAY...[:)] Walt[/color]
Posted on: 8/22/2009 10:57 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9033457
RE: Edge 540 T
[color=#FF00FF][center][size=4]I dont understand what I am doing MOST of the TIME....[:D][/size][/center][/color]
Posted on: 8/21/2009 10:58 AM by Author "Walt and Sage"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9033417
RE: PROBLEMS with your GASSER? AREA51 102 , DL 50 , 55 , 110 , CRRC , BME 58 , 110 , DA , ETC ... ???
PLANE....[:D] Walt[/color]
Posted on: 8/21/2009 10:50 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9033403
RE: PROBLEMS with your GASSER? AREA51 102 , DL 50 , 55 , 110 , CRRC , BME 58 , 110 , DA , ETC ... ???
[quote]ORIGINAL: mandtra Walt , How much fuel do you have thru your oldest DL , and what prop and RPM's ? [/quote] [color=#CC00FF]327 HARD 3D flights with Xoar 22x8 prop... Never checked rpms, start, tune and go.. [:D] Just installed the motor on a new BLING 3D[/color]
Posted on: 8/20/2009 9:14 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9030469
RE: PROBLEMS with your GASSER? AREA51 102 , DL 50 , 55 , 110 , CRRC , BME 58 , 110 , DA , ETC ... ???
[color=#9900FF]Six DL50s and no problems other than the included in the price muffler[/color]
Posted on: 8/20/2009 8:28 AM by Author "Walt and Sage"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9030384
| 
