RE: Engine kill switch
Most take the idle screw out and kill the engine using the radio. Also.......I use the Killer B kill switch on my boats. If you loose radio or reciever battery it will kill the motor and you can also use the third channel on your radio to kill the boat. Best kill switch on the market in my book.
Posted on: 2/22/2012 6:26 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10970476

RE: Best Oil
I use Maxima 927 Castor blend... Luv the smell...............>
Posted on: 12/15/2011 5:59 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10860539

RE: RC Boat similar to this:
Try www.bbyracing.com They have a hull for electric drag boats....
Posted on: 10/24/2011 6:10 AM by Author "Wildercraft" in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10779854

RE: Venom King of Shaves P1
There's a guy at our pond in Atlanta that has had his out two times now. For $1200 you get a purdy boat but it's only good for crusing around the pond. If you want to race then forget it. I myself always buy used boats and fix them up the way I want and I suggest you do the same since $1200 is a bunch of money for a boat that just looks good..... Just my thoughts thou.
Posted on: 9/20/2011 5:32 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10725518

RE: pipe resistance
As long as that checks the whole cooling system then I think you'll be ok. Just remember that any small misalignment of the pipe can cause it to leak that's why the old school stuff can cause grief.. No leak flange is still the way to go in my book. Have Fun!
Posted on: 9/8/2011 5:55 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10706958

RE: pipe resistance
You are going to want to check to see if your pipe and manifold set up are sealed up and not letting water in the exhaust system somewhere. To do this just pull the hose loose from the pickup (rudder) if that's where it's at and plug the outlet (where the water goes out) with your finger. Blow thru the hose and if it is sealed up no air will escape, This is what you want. If air escapes then you have a leak at the exhast flange or around the pipe orings which seal around the header. Wet coming out of the pipe might mean water is leaking somewhere in your set up... This is always a good practice to get used to and should be checked always to make sure there is no exhaust/water problems. Simple thing to do.. Good luck and hope I explained it so you can check it out yourself.
Posted on: 9/6/2011 6:43 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10703828

RE: pipe resistance
Get yourself a No Leak Flange set up From Gizmo.. They are great and the cheapest I have found. The old style flange like you have will cause you nothing but grief. If you just touch the pipe or blow over in a wreck it will move your pipe and leak water into the exhaust and make your motor run terrible. Junk it and go with a no leak is my answer. Also make sure your pipe (if water cooled) has good orings on it so it doesn't leak in to the exhaust too. It needs to seal around your header. If your header is aluminum makes sure you have plenty of cooling to the pipe so it does not distort your header and leak there too. Good luck
Posted on: 9/1/2011 5:46 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10696493

RE: Fuel Tanks
I think this guy still makes stainless tanks.... email him and see. wjbarney@tbs.net Tanks 4 u is his biz.
Posted on: 3/18/2011 6:14 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10407515

RE: Cheap 26cc engines?
Try Gizmomotors for the great prices on 26 zen's... A bit over $200 shipped.
Posted on: 3/7/2011 7:22 AM by Author "Wildercraft" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10384189

RE: zanoh caburation i need help...
2.5 on the low and 7/8 - 1 on the high...
Posted on: 3/5/2011 9:51 AM by Author "Wildercraft" in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=10380441